compaq evo notebook n800c series User Manual
Have a look at the manual compaq evo notebook n800c series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 65 Compaq manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Removal and Replacement Procedures Maintenance and Service Guide5–13 3. Remove the PM2.0 × 5.0 screw 1 that secures the mini PCI compartment cover to the base enclosure (Figure 5-10). 4. Lift the front edge of the cover and swing it back 2. 5. Remove the cover 3. Figure 5-10. Removing the Mini PCI Communications Slot Cover ✎Mini PCI compartment covers are available with silver finish for Presario 2800 models and carbon finish for Evo Notebook N800c, N800v, and N800w models. These covers are included in the Miscellaneous Plastics/Hardware Kit, spare part number 285261-001 for Presario 2800 models, and spare part number 286868-001 for Evo Notebook N800c, N800v, and N800w models. 268135-002.book Page 13 Thursday, October 24, 2002 4:10 PM
5–14Maintenance and Service Guide Removal and Replacement Procedures 6. Disconnect the modem cable from the modem board 1 (Figure 5-11). ✎The modem cable spare part number is 285268-001. 7. Spread the retaining tabs to release the mini PCI communications board 2. The board tilts up at a 45-degree angle. 8. Remove the board by pulling it away from the connector at a 45-degree angle 3. Figure 5-11. Removing a Mini PCI Communications Board Reverse the above procedure to install a mini PCI communications board. 268135-002.book Page 14 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures Maintenance and Service Guide5–15 5.7 Connector Cover ✎The connector cover is available with silver finish for Presario 2800 models and carbon finish for Evo Notebook N800c, N800v, and N800w models. This cover is included in the Miscellaneous Plastics/Hardware Kit, spare part number 285261-001 for Presario 2800 models, and spare part number 286868-001 for Evo Notebook N800c, N800v, and N800w models. 1. Prepare the computer for disassembly (Section 5.3). 2. Turn the computer bottom side up with the rear panel facing forward. 3. Remove the two PM2.0 × 5.5 screws 1 that secure the connector cover to the base enclosure (Figure 5-12). 4. Open the connector cover. 5. Remove the connector cover from the base enclosure 2. Figure 5-12. Removing the Connector Cover Reverse the above procedure to install the connector cover. 268135-002.book Page 15 Thursday, October 24, 2002 4:10 PM
5–16Maintenance and Service Guide Removal and Replacement Procedures 5.8 LED Cover 1. Prepare the computer for disassembly (Section 5.3). 2. Turn the computer bottom side up with the rear panel facing forward. 3. Remove the two black PM2.0 × 10.0 screws that secure the LED cover to the base enclosure (Figure 5-13). Figure 5-13. Removing the LED Cover Screws 4. Turn the computer top side up with the front facing forward. 5. Open the computer. LED Cover Spare Part Number Information LED cover288503-001 268135-002.book Page 16 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures Maintenance and Service Guide5–17 6. Use a flat-bladed tool to pry forward on the four clips on the LED cover 1 (Figure 5-14). 7. Press the esc and F1 keys to reveal the left notch 2 in the LED cover. 8. Insert a flat-bladed tool into the left notch and lift the left side of the LED cover 3. 9. Press the Pause and Del keys to reveal the right notch 4 in the LED cover. 10. Insert a flat-bladed tool into the right notch and lift the right side of the LED cover 5. 11. Remove the LED cover 6. Figure 5-14. Removing the LED Cover Reverse the above procedure to install the LED cover. 268135-002.book Page 17 Thursday, October 24, 2002 4:10 PM
5–18Maintenance and Service Guide Removal and Replacement Procedures 5.9 Keyboard Keyboards Spare Part Number Information Keyboards (for use with TouchPad models only) Arabic Belgian Brazilian Chinese Czech Danish French French Canadian German Greek/Polish Hebrew Hungarian International Italian285280-171 285280-181 285280-201 285280-AA1 285280-221 285280-081 285280-051 285280-121 285280-041 285280-151 285280-BB1 285280-211 285280-002 285280-061Korean Latin American Spanish Norwegian Portuguese Russian Slovakian Spanish Swedish Swiss Taiwanese Thai Tu r k i s h U.K. English U.S. English285280-AD1 285280-161 285280-091 285280-131 285280-251 285280-231 285280-071 285280-101 285280-111 285280-AB1 285280-281 285280-141 285280-031 285280-001 Keyboards with pointing stick Arabic Belgian Brazilian Czech Danish French French Canadian German Greek/Polish Hebrew Hungarian International Italian Korean285281-171 285281-181 285281-201 285281-221 285281-081 285281-051 285281-121 285281-041 285281-151 285281-BB1 285281-211 285281-002 285281-061 285281-AD1Latin American Spanish Norwegian Portuguese Russian Slovakian Spanish Swedish Swiss Taiwanese Thai Tu r k i s h U.K. English U.S. English285281-161 285281-091 285281-131 285281-251 285281-231 285281-071 285281-101 285281-111 285281-AB1 285281-281 285281-141 285281-031 285281-001 268135-002.book Page 18 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures Maintenance and Service Guide5–19 1. Prepare the computer for disassembly (Section 5.3). 2. Remove the LED cover (Section 5.8). 3. Lift the back edge of the keyboard 1 (Figure 5-15). 4. Slide the keyboard toward the back of the computer 2. 5. Lift the back edge of the keyboard and swing it forward 3 until it rests on the palm rest. Figure 5-15. Releasing the Keyboard 268135-002.book Page 19 Thursday, October 24, 2002 4:10 PM
5–20Maintenance and Service Guide Removal and Replacement Procedures 6. Remove the two PM2.0 × 4.0 screws 1 that secure the keyboard shield to the base enclosure (Figure 5-16). 7. Remove the keyboard shield 2. Figure 5-16. Removing the Keyboard Shield ✎The keyboard shield is included in the Miscellaneous Plastics/Hardware Kit, spare part numbers 285261-001 and 286868-001. 268135-002.book Page 20 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures Maintenance and Service Guide5–21 8. Release the ZIF connector 1 to which the keyboard cable is connected and disconnect the keyboard cable 2 from the system board (Figure 5-17). 9. Remove the keyboard. Figure 5-17. Removing the Keyboard Reverse the above procedure to install the keyboard. 268135-002.book Page 21 Thursday, October 24, 2002 4:10 PM
5–22Maintenance and Service Guide Removal and Replacement Procedures 5.10 Display 1. Prepare the computer for disassembly (Section 5.3). 2. Remove the LED cover (Section 5.8). 3. Close the computer and position the computer so the rear panel faces forward. Displays Spare Part Number Information Displays Contain parts with carbon finish for use with Evo Notebook N800c, N800v, and N800w models 15-inch, UXGA 15-inch, SXGA+ 15-inch, XGA 14-inch, XGA Contain parts with silver finish for use with Presario 2800 models 15-inch, UXGA 15-inch, SXGA+ 15-inch, XGA 14-inch, XGA MultiPort cover286872-001 286871-001 286870-001 286869-001 285265-001 285264-001 285263-001 285262-001 289037-001 268135-002.book Page 22 Thursday, October 24, 2002 4:10 PM