Comdial Dxp Plus Instructions Manual

Toll Restriction
With the toll restriction feature, the system allows or denies outgoing line calls to selected users over
selected lines. Toll restriction meets different dialing needs by allowing users to dial numbers that they
are required to dial yet restrict them from dialing numbers they are not allowed to dial. Toll restriction can
be used together with the automatic route selection and call costing features if desired, or used separately
as a stand alone feature or not used at all.
The programmer...

Tone Or Voice Signaling On Internal Calls
Intercom number calls can be tone signaled or voice signaled as desired.  Programming determines which
signaling method the system uses as the primary method when an intercom number call is made. Users
can choose the alternate method at the station by pressing the intercom key. Intercom number call
progress is marked by special tone signals.
Tracker Paging System
The Tracker Paging System interfaces a DXP system with individual Tracker pagers. The Tracker Paging...

Using Voice Mail With Tracking
When a caller reaches an extension with an assigned Tracker pager, and that extension is covered by
proprietary voice mail, the system may prompt the caller to either select the assigned Tracker pager or
leave a message. If the caller selects the Tracker pager, the system places the call in a page orbit, and
displays that page orbit number on the user’s Tracker pager. The user retrieves the call by dialing the
number of the page orbit containing the call. After a...

V
Voice Mail Integration Digits
Installers can choose the DTMF digits that the DXPPlussends to a voice mail system. A voice mail
system uses these DTMF digits to determine system and station status so that it can properly process a
call. Installers must be versed in the voice mail’s requirements before they can assign DTMF integration
digits in the DXPPlus. The system defaults the voice mail parameters to match the Comdial voice mail
system. Certain applications in countries with dialing plans different...

Voice Announce Blocking
This feature allows the user of multiline telephones to block voice announced intercom calls by dialing a
special code or by pressing a programmed button.
Z
Zone Paging
This feature arranges for stations to transmit and/or receive voice announcements to and from a particular
group of stations or to all stations. This feature also arranges for all-call and zone paging to an external
paging device. The programmer can assign stations to particular paging zones, up to eight zones, to...

Index
A
Abandoned Hold Release 47
Access Denied 47
Accessing The Tracker Pager From DISA 110
Account Code Button 47
Account Code Display And Display Time 48
Account Codes With Positive Verification 47
Account Codes With Positive
Verification—Forced 48
Adjunct Feature Module Support 48
All-Call Paging 48
Allow Ringer Off (Ringer Volume Off) 48
Alpha-Numeric Calling Party
And Line Display 48
Alternate Attendant 48
Alternate Button 49
Answer Button 49
Area Paging Interface 49
Attendant Position 49
Attendant...

Defining The Line Boards 13
Defining The Optional Circuit Boards 15
Defining The Station Boards 14
Delayed Ringing 65
Diagnostics (Limited) 65
Dial 0 For System Attendant 65
Dial Pulse Interdigit Time 65
Dial Pulse Rate—Make / Break Ratio 65
Dialed Number Identification Service (DNIS) 66
DID Hunting 66
Digital Voice Announce 70
Digital Wireless Telephone Support 66
DigiTech Telephones 6
Direct-in Lines (DIL) 66
Direct Inward Dialing (DID) 66
Direct Inward System Access (DISA) 66
Direct Line Access By...

K
Key/Hybrid Configuration 85
Knowing The FCC Rules And Regulations 43
Knowing The General Specifications 37
L
Last Number Redial 86
Line Access Restriction 86
Line Answer From Any Station (TAFAS) 86
Line Appearance, Enhanced 86
Line Boards, Defining The 13
Line Connections 28
Line Group Access 86
Line Groups 86
Line Out Softkey Option 86
Line Queuing 87
Liquid Crystal Display Messaging 87
Liquid Crystal Display Support 87
Location Code 87
Locating The Boards 16
Lock Button 88
M
Manual Exclusion 88...

S
Save Button Dial Storage 97
Saved Number Redial 97
Screened Call Transfer 97
Secure Account Code Display 97
Self Diagnostics 97
Serial Call Button 49
Serial Data Port 98
Serial Data Ports, Connecting The 34
Service Observing 98
Shift Button 98
Silent Mode Button 98
Single-Line Proprietary Telephone Support 99
Slave Equipment, Connecting The 36
SMDA Reports 99
SMDA Reports—Call Costing / Hold Time 99
SOHVA Beeps 105
SOHVA, Busy On 105
SOHVA Groups 103
SOHVA Tone Bursts 105
SOHVA 105
Speakerphone Support...

Installing The
DXP Plus Main Common Equipment Cabinet
1.0 Installing The Common Equipment Cabinet
1.1 Considering The Mounting Parameters
·Choose a suitable location.
4A suitable location is within four feet of a proper electrical outlet. (The main cabinet and two expansion
cabinets requires two dedicated 117VAC 15 AMP circuits, with a third-wire ground, supplied to standard
NEMA 5-15R electrical outlets. Each outlet must be supplied from the opposite phase of the AC power line.
4A suitable location...