Comdial DXP, DXP Plus, Impact FX Digital Communication System Release 15B Instructions Manual

that slot in the original DXP, select theNo Boardresponse. When you finish listing the board
configuration,OKyour selections.
NOTE: Under BOARD CONFIGURATION/CABINET VIEW, the VMMI graphically shows the boards
installed in the arrangement that you specified and leaves a blank slot for any place that you
answered a station or line board prompt with a no board response
(c)
A prompt asks that you confirm that conversion has taken place by clickingOK.
7.
SelectOpen As....
8.
Select the file name that you...

Upgrading The DXP Plus Software
The DXPPlusdigital communications system includes system software when it ships from the factory.
At initial system installation, you do not need to load the system software to make the system
operational. Should you need to later reload the system software (for software upgrade purposes for
example), you can do so using the supplied system software disk. Use Windows File Manager or
MS–DOS commands to save the disk’s information from your computer’s floppy drive to its...

Upgrading the Impact FX Software
Each system requires a system software keying code. This keying code, or system software key, is an
encrypted string of characters, that you obtain from a Comdial representative and enter into VMMI
programming during software upgrade operations. The system software key enables feature sets, system
capacity, and special stand alone features as ordered. The system software key controls the active feature
set of the installed software by controlling access to the database...

Enabling The Impact FX System Software
The following procedure details the sequential software enabling details:
1. Obtain the software .bin file and store it away on the PC if you have not already done so.
Download the latest xxxxxxxx.bin file from the Comdial Online Support Server. Reach the Online
Support Server through the Comdial Internet home page on the worldwide web at www.comdial.com.
Once there, follow the prompts to get to the Support Server and then to get to the location where you can...

5.
Use VMMI to log into the system, open theSwitchdrop-down menu, and click onSystem Software
Upgrade.
6.
Archive the existing database as prompted (if desired) by going toSwitch/Archive Databaseon
the VMMI screen and continue.
7.
From the system software upgrade window, click theProvide a New Keyline, and type the system
software key character sequence into the open block.
8.
ClickNext,browse for and select the software upgrade xxxxxxxx.bin file that you earlier stored in
the PC.
9. VMMI provides a new...

This page remains blank intentionally.
12 – Upgrading the Impact FX Software
GCA40–229 Programming The Features 

This manual has been developed by Comdial Corporation (the “Company”) and is intended
for the use of its customers and service personnel. The information in this manual is subject
to change without notice. While every effort has been made to eliminate errors, the
Company disclaims liability for any difficulties arising from the interpretation of the
information contained herein.
The information contained herein does not purport to cover all details or variations in
equipment or to provide for every...

GCA40–229.01 04/00
printed in U.S.A.