Comdial Digitech Multiline Telephone Instructions Manual

GCA70-280 DigiTeoh Station User’s Guide 
Making a Paging Announcement 
l To page through an external paging amplifier (if your 
system provides this feature), 
i . lit handset, 
2. press paging line select button and dial page access code (see your 
attendant for code) -- if paging is connected to a dedicated paging 
j:. 
port, dial ITCY 69, 
3. make announcement. 
l To page through system telephones (all- call and zone 
wing), 
1. lift handset, 
2. press ITCM and dial all-call or zone number: 
64,85, or...

DigiTech Station User’s Guide GCA70-280 
l 
To forward all calls to another telephone, 
1. 
press ITCM and dial +K 5, 
2. dial extension number of station to which calls are to be forwarded. 
l 
To cancel allcall forward, 
press ITCM and dial t 5. 
NOTE: For each personal call received during call forward, you will hear a ring 
reminder (short tone burst) to remind you that calls are being forwarded. 
Using Automatic Call-Back 
l To arrange for the system to call back when a busy 
station becomes idle or...

Engaging Automatic Set Relocation 
NOTE: If this feature has been enabled by your system programmer, the mes- 
sage-waiting light will flash for several seconds when you corinect your 
telephone to another location. This means that the system Is waiting to 
automatically relocate your extension number and other programmed 
features to the new location. 
If you do not want your telephone to have all of fts old programming after 
relocation, reject the automatic relocation. 
l To accept automatic...

DigiTech Station User’s Guide GCA78280 
l 
To store personal speed dial numbers, 
1. press ITCM and dial * 4 2, 
2. dial memory location (l-0). 
3. press line button, or dial 1,2,3, or 4 to select line groups i- 4, 
or dial 0 for system to select line, 
4. dial number to be stored (16 digits max.) press TAP to store 
hookfiash and press HOLD to store pause (if needed), 
5. press TRANYCONF, dial next location, select line, and dial another 
number to be stored, 
6. repeat previous step until finished,...

GCA7Cb280 ulgl 1 ecn sitatlon users tiu~aa 
1 
Index 
Answering Calls.. ................................... 5 
Answering SOHVA.. 5, 6 / 
.............................. 
Automatic Call Back .............................. 12 
Automatic Set Relocation.. 
.................... 13 
Call Waittng.. 
......................................... 12 
Conferencing.. ....................................... 9 
DigiTech Telephone , ............................. 2 
FlashiRecall........................................... 10...

This manual has been developed by Com- 
dial Corporation (the ‘Company’) and is 
intended for the use of its customers and 
service personnel. The information in this 
manual is subject to change without notice. 
While every effort has been made to elimi- 
nate errors, the Company disclaims liability 
for any difftculties arising from the interpre- 
tation of the information contained herein. 
The information contained herein does not 
purport to cover all details or variations in 
equipment or to...