Comdial Digitech LCD Speakerphone Instructions Manual

GCAIC-184 DigiTech Station User’s Guide 
Making a Paging Announcement 
l 
To page through an external paging amplifier (if your 
system provides this feature), 
1. liihandset, 
2. press paging line select button and dial page access code (see your 
attendant for code) - if paging is connected to a dedicated paging 
port, dial ITCM 89. 
3. make announcament. 
l To page through system telephones (all- call and zone 
paginsh 
1. lift handset, 
2. press FTCM and dial all-call or zone number:...

DigiTech Station User’s Guide GCA70-184 
l To cancel call forward, 
1. press OPTIONS, 
2. press NEXT 
3. press CFWD 
4. press PERS or ALL 
5. press CLEAR, 
6. press SPKR to end. 
NOlEr For each personal call received durfng call forward, you will hear a ring 
reminder (short tone burst) to remind you that calls are being forwarded. 
Using Automatic Call-Back 
l 
To arrange for the system to call back when a busy 
station becomes idle or rings with no answer, 
1. make intercom call and hear busy signal or...

GCA70-184 DigiTech Station User’s Guide 
Engaging Automatic Set Relocation 
NOTE: If this feature has been enabled by your system programmer, the mes- 
sage-waiting light will flash for several seconds when you connect your 
telephone to another locatton. This means that the system is waiting to 
automatically relocate your extension number and other programmed 
features to the new location. 
If you do not want your telephone to have all of its old programming after 
relocation, reject the automatic...

DigiTech Station User’s Guide GCA70-184 
l To store extension numbers at DSS buttons, 
1. press OPTIONS, 
2. press NEXT four tfrnes, 
3. press DSS 
4. press programmable button, 
5. dial extension number, 
6. press next programmable button and diil another extension num- 
ber, 
7. repeat previous step until finish& then press SPKR to end. 
l To store special purpose feature buttons, 
1. press OPTIONS, 
2. press NEXT four times, 
3. press FEAT, 
4. press NEXT until the feature you want is displayed, 
5....

GCA7D-164 
DigiTach Station User’s Guide 
Index 
Answering Calls.. ................................... 
5 
Answering SCHVA.. .............................. 
6 
Automatic Call Back.. ............................ 12 
Automatic Set 
Relocation.. .................... 13 
Call Waiting.. ......................................... 
12 
Cunferencing 
......................................... 9 
DigiTech Telephone .............................. 2 
Feature Access Code.. .......................... 
15...

This manual has been developed bv Com- 
dial Corporation (the ‘Comp$)~and is 
intended for the use of its customers and 
service personnel. The information in this 
manual is subject to change without notice. 
While every effort has been made to elimi- 
nate errors, the Company disclaims liabilii 
for any diiculties arising from the interpre- 
tation of the information contained herein. 
The infom-ratktn contained herein does not 
purport to cover all details or variations in 
equipment or to provide for...