Comdial Digitech LCD Speakerphone Instructions Manual

							GCAIC-184 DigiTech Station User’s Guide 
Making a Paging Announcement 
l 
To page through an external paging amplifier (if your 
system provides this feature), 
1. liihandset, 
2. press paging line select button and dial page access code (see your 
attendant for code) - if paging is connected to a dedicated paging 
port, dial ITCM 89. 
3. make announcament. 
l To page through system telephones (all- call and zone 
paginsh 
1. lift handset, 
2. press FTCM and dial all-call or zone number: 
84,85,or85=zones1,2,or3 
87 = all-call, 
3. make announcement. 
4. hang up handsat or walt for an answer. 
l To answer telephone paging from any station, 
1. lifthandsef, 
2. press CTCM, dial 55, and meet paging party on line. 
Switching Between Pulse and Tone 
l 
To convert to tone while dialing - If the local telephone 
?eMce is pulse (rotary) 
press # at point in dtallng sequenca Were csrnwsion to tone ls 
required. 
NO= Pulsellone switching can bs programmed into memory keys by pressing 
#during number storage. 
Forwarding Calls 
l 
To forward calls to another telephone, 
1. press OPTIONS, 
2. press NM, 
3. pressCMID, 
4. press PEW, for personal, or AU, tu forward all calls, 
5. press SET 
6. dial extension number of station to which calls are to be forwarded. 
7. press SPKR to end.  
						

							DigiTech Station User’s Guide GCA70-184 
l To cancel call forward, 
1. press OPTIONS, 
2. press NEXT 
3. press CFWD 
4. press PERS or ALL 
5. press CLEAR, 
6. press SPKR to end. 
NOlEr For each personal call received durfng call forward, you will hear a ring 
reminder (short tone burst) to remind you that calls are being forwarded. 
Using Automatic Call-Back 
l 
To arrange for the system to call back when a busy 
station becomes idle or rings with no answer, 
1. make intercom call and hear busy signal or ring-back tone, 
2. press CAMP, 
3. hang up. (When called statfon becomes idle or is operated by its 
user, your statfon will ring. Call-back is canceled if you do not lifl your 
handset when you hear this ringing). 
l To answer call-back ring, 
Iii handset (called station will ring; call-back is canceled if you do 
not lift your handset). 
l To cancel automatic call back, 
press tlCM and dial # 6. 
Using Call Waiting 
l 
To activate call waiting, 
1. make intercom call and hear busy signal, 
2. press NEXT, 
3. press CWAtT. 
l To cancel call waiting, 
hang up handset. 
l To answer a call-waiting tone at your telephone, 
1. hear short tone burst in handset receiver, 
2. complete present call, and hang up (waiting call will begin ringing), 
3. lift handset to answer. 
12  
						

							GCA70-184 DigiTech Station User’s Guide 
Engaging Automatic Set Relocation 
NOTE: If this feature has been enabled by your system programmer, the mes- 
sage-waiting light will flash for several seconds when you connect your 
telephone to another locatton. This means that the system is waiting to 
automatically relocate your extension number and other programmed 
features to the new location. 
If you do not want your telephone to have all of its old programming after 
relocation, reject the automatic relocation. 
l 
To accept automatic relocation, 
do nothing and watt for the light to turn off on its own, or press the 
HOLD button to immediately accept the relocation (light immediately 
turns off). 
l 
To reject the automatic relocation, 
press tha It button while the message watting light is flashing. 
Programming Your Telephone 
l To store autodial or personal speed dial numbers, 
1. 
2. 
3. press OPTIONS, 
press NEXT three 
times, 
press ADIAL or SDIAL to chonsa autodttl or speed dial program- 
ming. 
4. press programmable button 
5. press line button, or dial 1,2,3, or 4, to select line groups 1 - 4, or 
. . . 
dial 0 for system to select line, 
6. dial numberto be stored (16 digits max.) 
7. 
a. a to store hookflash in an autodtal sequence, press TAP, press 
HOLD to store pause (only lf needed), 
press SAVE, then press next programmabte button, and dial another 
number to be stored, 
repeat previous step unbil finished then press SPKR. 
NOTE: You can store an autodial number at a second 
level at a DSS button lf you wish. 
13  
						

							DigiTech Station User’s Guide GCA70-184 
l To store extension numbers at DSS buttons, 
1. press OPTIONS, 
2. press NEXT four tfrnes, 
3. press DSS 
4. press programmable button, 
5. dial extension number, 
6. press next programmable button and diil another extension num- 
ber, 
7. repeat previous step until finish& then press SPKR to end. 
l To store special purpose feature buttons, 
1. press OPTIONS, 
2. press NEXT four times, 
3. press FEAT, 
4. press NEXT until the feature you want is displayed, 
5. press desired feature button, 
3. press programmabte button, 
7. press NEXT to program another feature or EXIT to quit. 
14  
						

							GCA7D-164 
DigiTach Station User’s Guide 
Index 
Answering Calls.. ................................... 
5 
Answering SCHVA.. .............................. 
6 
Automatic Call Back.. ............................ 12 
Automatic Set 
Relocation.. .................... 13 
Call Waiting.. ......................................... 
12 
Cunferencing 
......................................... 9 
DigiTech Telephone .............................. 2 
Feature Access Code.. .......................... 
15 
FlashiRecall........................................... 10 
Forwarding Calls.. .................................. 
11, 12 
Holding Calls.. ........................................ 7, 6 
Introduction.. .......................................... 
2 
Lights, Telephone.. ................................ 
3,4 
Making Calls.. 
......................................... 6 ,7 
Messaging.. ............................................ 
10 
Paging.. .................................................. 
11 
... Programming your Telephone.. .............. 
13, 14 
PulselFone 
Telephones.. ....................... 
11 
Remlimash.. ......................................... 
10 
SOHVA Calls.. 
....................................... 6 
Speakerphone, 
Using the.. .................... 5 
Telephone Lights.. ................................. 
3.4 
Transferring Calls.. ................................ 9 
Typical DigiTech Telephone.. 
................ 2 
15  
						

							This manual has been developed bv Com- 
dial Corporation (the ‘Comp$)~and is 
intended for the use of its customers and 
service personnel. The information in this 
manual is subject to change without notice. 
While every effort has been made to elimi- 
nate errors, the Company disclaims liabilii 
for any diiculties arising from the interpre- 
tation of the information contained herein. 
The infom-ratktn contained herein does not 
purport to cover all details or variations in 
equipment or to provide for every possible 
contingency to be met in connection with 
installation, operation, or maintenance. 
Should further infom&ton be desired, or 
should particular problems arise which are 
not covered suftidentty for the purchaser’s 
purposes contact, Comdial, Inside Sales 
Department, P.O. Box 7266, Chartottes- 
ville, Virginia 22906. 
COMDIAL 
Charlottesville. VA 22906-7266 
Printed in U.S.A. GCA 70-184.05 
8l83