Cisco Wap4410n Wirelessn Manual

Setting Up the Cisco WAP4410N Wireless-N Access Point
Navigating the Utility
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide 21
5
Setup
This page allows you to configure the host name and IP address settings and to 
set the time. 
•Basic Setup—Configures the host name and IP address settings for this 
access point.
•Time—Sets the time on this access point.
•Advanced—Sets the HTTP Redirect and 802.1x supplicant settings for this 
access point.
Wireless
This page allows you...

Setting Up the Cisco WAP4410N Wireless-N Access Point
Navigating the Utility
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide 22
5
•Log—Configures the log settings.
•Diagnostics—Allows you to perform diagnostic activities, which can be 
useful in solving network problems.
•Factor y Default—Resets the access point to its factory default settings.
•Firmware Upgrade—Upgrades the access point’s firmware on this screen.
•Reboot—Reboots the access point.
•Configuration...

6
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide 23
Configuring the Cisco WAP4410N Wireless-N 
Access Point
This chapter describes how to configure your Cisco WAP4410N access point 
using the web-based configuration utility. The web-based configuration utility 
contains the following topics which are described in this chapter.
•Setup
•Wireless
•AP Mode
•Administration
•Status
Setup
The Setup section describes how to configure the general settings of the access 
point. 

Configuring the Cisco WAP4410N Wireless-N Access Point
Setup
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide 24
6
Basic Setup
The Setup > Basic Setup page displays the general settings of the access point. 
You can configure the following basic setup settings:
•“Configuring Device Setup Settings” on page 24
•“Configuring Network Setup Settings” on page 24
Configuring Device Setup Settings
To configure the device setup settings of the access point, follow these steps:
STEP...

Configuring the Cisco WAP4410N Wireless-N Access Point
Setup
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide 25
6
STEP 1Click Setup > Basic Setup.
STEP  2From the IP Settings drop-down menu, select one of the following options:
•Static IP Address—Select this option to assign a static or fixed IP address 
to the access point. 
•Automatic Configuration—Select this option to automatically configure 
the IPv4 network settings of the access point using a DHCP server on your...

Configuring the Cisco WAP4410N Wireless-N Access Point
Setup
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide 26
6
Time
The Setup > Time page displays the time settings of the access point. By setting 
up the correct time, you can help your network administrator search the system 
log to identify problems. By default, the WAP is configured to obtain its time from a 
predefined list of NTP servers.
To otherwise configure the time settings for the access point, follow these...

Configuring the Cisco WAP4410N Wireless-N Access Point
Setup
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide 27
6
Advanced
The Setup > Advanced page displays advanced settings. To configure the 
advanced setup settings of the access point, follow these steps:
STEP 1Click Setup > Advanced.
STEP  2The LAN Port Speed Settings configure settings for the port that physically 
connects the WAP device to a local area network.
a. If the WAP device has compatibility issues with your...

Configuring the Cisco WAP4410N Wireless-N Access Point
Wirele ss
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide 28
6
c. To use a name and password for authentication, click Authentication via Name 
and Password and enter the name and password in the corresponding fields.
STEP  6Click Save.
Wireless
The Wireless section describes how to configure the wireless settings of the 
access point.
Basic Settings
The Wireless > Basic Settings page displays the basic wireless network...

Configuring the Cisco WAP4410N Wireless-N Access Point
Wirele ss
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide 29
6
You can also select Auto from the Wireless Channel drop-down menu so that your 
access point selects the channel with the lowest amount of wireless interference 
while the system is powering up. Automatic channel selection starts when you 
click Save. It takes several seconds to scan through all the channels to find the 
best channel. 
NOTEFor the Wireless-N...

Configuring the Cisco WAP4410N Wireless-N Access Point
Wirele ss
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide 30
6
Security
The Wireless > Security page displays the wireless security settings of the 
access point. To configure the wireless security settings of the access point, 
follow these steps:
STEP 1Click Wireless > Security.
STEP  2To configure wireless isolation between SSIDs:
a. From the Select SSID drop-down menu select an SSID.
b. To isolate wireless clients...