Home > Cisco Systems > Router > Cisco Systems Router 1800 Series User Manual

Cisco Systems Router 1800 Series User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Cisco Systems Router 1800 Series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 3 Cisco Systems manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							 
    IN-1
    Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide
    OL-6426-02
    INDEX
    Symbols
    -? command     3
    ? command     4, 3
    Numerics
    802.1x authentication     8
    A
    AAL     6
    AAL3/4     6
    AAL5     6
    abbreviating commands     6
    access groups     3
    access lists
    applying to interfaces     4
    configuration commands     2
    configuring for firewalls     3
    description     11
    ACK bits     11
    Address Resolution Protocol
    See ARP
    ADSL
    configuring     6
    ordering     5
    overview     1
    troubleshooting     2
    aggregator
    configuring     12
    ARP     2
    Asymmetric Digital Line Subscriber Line
    See ADSL
    asynchronous interface
    configuring     13
    ATM
    configuring the ATM interface     8
    errors, displaying     6
    events, displaying     7
    interface
    configuration scenario     5
    overview     5
    packets, displaying     8
    PVC encapsulation types     6
    queues     10
    troubleshooting commands     2 to 9
    WAN interface     5
    ATM adaptation layer
    See AAL
    ATM interface
    See ATM
    audience, user     11
    authentication protocols
    See PPP authentication protocols
    AutoSecure
    configuring     2
    B
    backup interfaces
    for dial backup activation     1
    b command     3
    b flash command     3
    boot commands     3
    bridging 
    						
    							Index
    IN-2
    Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide
    OL-6426-02
    configuring     10, 4
    broadcast intervals, RIP     3
    C
    CAR     9
    caution, described     13
    CBAC firewall
    configuring     3
    CBWFQ     9
    Challenge Handshake Authentication Protocol
    See CHAP
    CHAP     4, 4
    Cisco IOS firewall IDS     4
    Cisco IOS queues     10
    class-based weighted fair queuing
    See CBWFQ
    command conventions     13
    command-line access configuration example     12
    command-line access to router, configuring     10
    command modes     2 to 4
    commands
    abbreviating     6
    access list     2
    ATM troubleshooting     2 to 9
    completing     4
    debug atm events     7
    debug atm packet     9
    finding available     4
    help with     4
    privileged EXEC, accessing     5
    redisplaying     4
    ROM monitor debugging     9
    undoing     6
    command variables
    listing     4
    TFTP download     3
    committed access rate
    See CAR
    configuration changes
    making     5
    saving     12, 7
    configuration examples
    command-line access     12
    DHCP server     3
    dynamic routes     15
    EIGRP     16
    PPPoA with NAT     11
    PPPoE with NAT     9
    simple firewall     5
    static routes     13
    VPN with IPSec and GRE     10
    VPN with IPSec tunnel     10
    wireless LAN     6
    configuration prerequisites     4
    configuration register
    changing     10
    changing from ROM monitor     6
    value, resetting     12
    configuring
    ATM interface     8
    basic router parameters     1
    bridging     10
    command-line access     10
    DHCP server     1
    dial backup     1
    dialer interface     5
    dynamic routes     13, 15
    Easy VPN     1
    EIGRP     15
    EIGRP, IP     15 to 16
    Fast Ethernet interface     6, 9
    firewall     1
    global parameters     6
    GRE tunnel     8
    group policy     4
    IKE policy     3
    inspection rules for firewalls     3 
    						
    							Index
    IN-3
    Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide
    OL-6426-02
    IP EIGRP     15 to 16
    IPSec tunnel     1
    loopback interface     9 to 10
    NAT     9
    PPPoE with NAT     1, 2
    RIP     14
    router from PC     1
    static routes     12
    VLANs     1
    VPNs     1, 3
    WAN interfaces     7
    your network, preparing for     4
    confreg command     6
    connections
    setting up     4
    console download     7 to 8
    context command     8
    conventions, command     13
    copy running-config startup-config command     7
    copy tftp flash command     3
    corporate network, connecting to     4
    crypto map
    applying to interface     7, 8
    D
    debug atm commands     6
    debug atm errors command     6
    debug atm events command     7
    debug atm packet command     8, 9
    debug commands, ROM monitor     8, 9
    default configuration, viewing     2
    DHCP
    configuring DHCP server     2
    IP address assignment     1
    DHCP and Easy IP (Phase 2)     8
    DHCP server
    configuration example     3
    configuring as     1
    verify configuration     4
    dial backup
    configuring     1, 9, 13
    dialer watch     4
    feature limitations and configuration     1
    floating static routes     2
    dialer interface
    configuring     5, 3
    description     6
    dialer watch     4, 7
    dir device command     3
    disaster recovery     3 to 5
    DSL signaling protocol     6
    Dynamic Host Configuration Protocol
    See DHCP
    dynamic routes
    configuration example     15
    configuring     13, 15
    E
    Easy IP (Phase 1)
    overview     8
    Easy IP (Phase 2)
    overview     8
    Easy VPN
    configuration tasks     2
    configuring     1
    remote configuration     9
    verify configuration     10
    EIGRP
    configuration example     16
    configuring     15
    configuring for IP     15 to 16
    overview     2, 3
    enable password
    recovering     12
    setting     5
    enable secret password 
    						
    							Index
    IN-4
    Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide
    OL-6426-02
    recovering     12
    setting     5
    encapsulation     6
    See also examples
    Enhanced Interior Gateway Routing Protocol
    See EIGRP
    error messages, configuration     6
    error reporting, ROM monitor     8
    errors, ATM, displaying     6
    Ethernet     5
    events, ATM, displaying     7
    experience, user     11
    extended access list
    overview     11
    F
    fallback bridging     10
    Fast Ethernet interface
    configuring     6, 9
    Fast Ethernet WAN interfaces
    configuring     7, 3
    filtering
    See access lists
    firewalls
    access list configuration     3
    applying access lists to interfaces     4
    applying inspection rules to interfaces     4
    configuration example     5
    configuration tasks     2
    configuring     1
    configuring inspection rules     3
    floating static routes
    configuring     3
    description     7
    flowcontrol command     2
    fragmentation, PPP     9
    frame command     8
    G
    G.SHDSL
    configuring     7
    ordering     5
    overview     2
    troubleshooting     2
    global configuration mode
    entering     5
    summary     2, 3
    global parameters, setting up     6
    GRE
    configuring     1
    GRE tunnel
    configuration example     10
    configuration tasks     8
    group policy
    configuring     4
    H
    handshake
    defined     2
    three-way     4
    two-way     4
    help command     3
    help with commands     4
    hop count, defined     3
    I
    i command     3
    IGMP snooping     10
    IKE policy
    configuring     3
    inspection rules
    applying to interfaces     4
    configuring     3
    interface configuration mode     3 
    						
    							Index
    IN-5
    Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide
    OL-6426-02
    interface port labels (table)     1
    interfaces
    ATM
    displaying status for     5
    dialer     6
    interleaving
    PPP     9
    Internet connection, setting up     4
    IP
    overview     2
    routing, setting up     4
    IPCP     8
    IP multicast switching     9
    IP Precedence
    with CBWFQ     10
    overview     9
    IPSec tunnel
    configuration example     10
    configuration tasks     2
    configuring     1
    crypto method     7
    transforms and protocols     6
    ISDN interface
    configuring     9
    ISDN peer router
    configuring     12
    ISDN S/T port
    for dial backup     9
    K
    k command     8
    L
    LAN with DHCP and VLANs
    configuring     1
    Layer 2 interfaces     9
    LCP     4
    LFQ     10
    line configuration
    for V.92 modem     15
    line configuration mode     4
    Link Control Protocol
    See LCP
    LLC     6
    loopback interface
    configuring     9 to 10
    low latency queuing
    See LFQ
    M
    MAC table manipulation     9
    meminfo command     9
    metrics
    EIGRP     3
    RIP     3
    mode configuration, applying to crypto map     5
    modes
    See command modes
    N
    NAT
    configuration example     9, 11
    configuring with PPPoA     9
    configuring with PPPoE     1, 7
    overview     7 to 8
    See also Easy IP (Phase 1)
    NCP     4
    network address translation
    See NAT
    network configuration, preparing for     4
    Network Control Protocols
    See NCP 
    						
    							Index
    IN-6
    Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide
    OL-6426-02
    network protocols     2
    nonvolatile RAM
    See NVRAM
    note, described     13
    NVRAM, saving changes to     7
    O
    overloading, defined     8
    P
    packets, ATM, displaying     8
    PAP     4
    parameters
    global, setting up     6
    Password Authentication Protocol
    See PAP
    password protection     5
    passwords
    recovery     9 to 12
    resetting     12
    setting     5
    permanent virtual circuit
    See PVC
    permit command     11
    per-port storm control     10
    ping atm interface command     3
    Point-to-Point Protocol
    See PPP
    policy-based routing     9
    policy lookup, enabling     6, 4, 5
    port assignments, common     1 to 2
    port labels for interfaces     1
    port numbers currently assigned     1 to 2
    PPP     9
    authentication protocols     3 to 4
    fragmentation     9
    interleaving     9
    overview     3
    PPP/Internet Protocol Control Protocol
    See IPCP
    PPPoA, configuration example     11
    PPPoE
    configuration example     9
    configuring     1
    verify configuration     10
    PPPoE client     1
    prerequisites, for configuration     4
    privileged EXEC commands, accessing     5
    privileged EXEC mode     2, 3
    protocols
    ATM     5
    Ethernet     5
    network     2
    network interface     5 to 6
    PPP authentication     3 to 4
    routing overview     2 to 3
    PVC
    encapsulation types     6
    overview     6
    Q
    QoS
    parameters     9 to 10
    queues, ATM     10
    R
    radio station subinterfaces
    configuring     5
    related documents     14
    remote access VPN
    with Easy VPN and IPSec tunnel     1
    remote management 
    						
    							Index
    IN-7
    Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide
    OL-6426-02
    configuring     9, 13
    reset command     3
    resetting
    configuration register value     12
    passwords     12
    router     11
    RIP
    configuring     14
    overview     2 to 3
    ROM monitor
    commands     2
    debug commands     8, 9
    entering     1
    exiting     9
    root radio station
    configuring     2
    router configuration mode     4
    Routing Information Protocol
    See RIP
    routing protocol overview     2 to 3
    RST bits     11
    RSVP     10
    S
    saving configuration changes     12, 7
    security authentication protocols     4
    security features
    configuring     1 to 4
    settings
    router default     2
    standard VT-100 emulation     2
    SHDSL
    See G.SHDSL
    show atm interface command     5, 6
    show controllers dsl command     8
    show dsl interface atm command     7
    show interface command     3
    site-to-site VPN
    with GRE and IPSec tunnel     1
    software, upgrading methods     9
    stack command     8
    static routes
    configuration example     13
    configuring     12
    Switch     7
    Switched Port Analyzer (SPAN)     9
    Switched Virtual Interfaces (SVIs)     9
    Switch Port Configurations     7
    Switch port configurations     7
    Switch Ports Configuration, Cisco 1800     7
    symmetrical high-data-rate digital subscriber line
    See G.SHDSL
    sysret command     9
    T
    TACACS+     5
    TCP/IP-oriented configuration     1
    TCP port numbers, currently assigned     1 to 2
    terminal emulation software     1
    tftpdnld command     3, 5
    TFTP download     3 to 5
    See also console download
    Timesaver, defined     13
    transform set
    configuring     6
    translation
    See NAT
    triggered extensions to RIP     3
    troubleshooting commands, ATM     2 to 9
    U
    UDP
    port numbers, currently assigned     1 to 2
    undoing commands     6 
    						
    							Index
    IN-8
    Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide
    OL-6426-02
    upgrading software, methods for     9
    User Datagram Protocol
    See UDP
    user EXEC mode     2, 3
    V
    V.92 modem
    for dial backup     13
    variables, command listing     4
    VC     6
    verify
    DHCP server configuration     4
    Easy VPN configuration     10
    PPPoE with NAT configuration     10
    VLAN configuration     5
    viewing default configuration     2
    virtual configuration register     6
    virtual private dialup network group number
    configuring     2
    VLANs
    configuring     1
    verify configuration     5
    VLAN trunking protocol (VTP)     8
    VPDN     2
    VPNs
    configuration example     10
    configuration tasks     2, 3
    configuring     1, 4
    W
    WAN interfaces
    configuring     7, 3, 5
    wireless LAN
    configuration example     6
    configuration tasks     2
    X
    xmodem command     7 
    						
    All Cisco Systems manuals Comments (0)