Cisco Rfgw1d Manual

 
 
 Release Management 
 
78-4025112-01 Rev H0 227 
 
Release Management 
Installation of the 96-QAM channel aware releases V03.00.XX and above follow the 
same guidelines and procedures outlined in Chapter 3: General Configuration and 
Monitoring (see General Configuration and Monitoring on page 25).  
Upgrades 
Simply applying a 96-QAM channel license to a RF Gateway 1 release that is not 
capable of 96-Channel operation (in other words, less than V03.00.XX) will have no 
effect on the operation of...

 
Chapter 15    96 QAM Channel Software  
 
 
228 78-4025112-01 Rev H0 
Fully licensed 96 QAM channels on the RF Gateway-1 Summary page appear as 
follows: 
  
Revert 
A RF Gateway 1 user can exercise the Revert capability to switch from the 96-QAM 
channel aware V03.00.XX release to V01.03.XX, V02.02.XX release branches. 
  

 
 
 Configuration Management 
 
78-4025112-01 Rev H0 229 
 
Configuration Management 
Configuration management of the 96-QAM channel aware releases, for example, 
V03.00.XX and above, follow the guidelines and procedures outlined in Chapter 3: 
General Configuration and Monitoring (see General Configuration and 
Monitoring on page 25).  
Backup 
No additional information or procedures are needed to perform 96-QAM channel 
backups offline.  As before, frequent backups are highly recommended for all...

 
Chapter 15    96 QAM Channel Software  
 
 
230 78-4025112-01 Rev H0 
Operational Considerations 
Operating in 96-QAM channel mode provides an increased capacity with no 
additional hardware or operational costs. Users will be provided with new power 
level ranges and two combined channel banks capable of up to Quad channels 
configured per RF port available.  
QAM Configuration 
All 96 QAM channels are configurable from the QAMS/QAM Configuration sub 
menus.  Two sets of four combined channels are now...

 
 
 Operational Considerations 
 
78-4025112-01 Rev H0 231 
 
RF Port Sub-Menu Example 
 
RF Port output power ranges are based on the total number of combined channels 
selected by the user. Refer to the table below. 
Combined 
Channels 
Range 
1 52-62 
2 48-58 
3 46-56 
4 44-54 
5 43-53 
6 42-52 
7 41-52 
8 41-52  

 
Chapter 15    96 QAM Channel Software  
 
 
232 78-4025112-01 Rev H0 
Channel Configuration sub-menu Example 
  
Map Configuration 
The RF Gateway 1 Map editor now allows the user to provision the additional 
available channels for services. Video and Data map entry in the 96-QAM channel 
capable V03.00.XX and above releases is shown below. Selecting a particular map 
row allows the user to view the appropriate  pull-down menus and data fields.  The 
same principle is applied to Video stream map...

 
 
 Operational Considerations 
 
78-4025112-01 Rev H0 233 
 
Video Stream Map Editor 
 
Video Map Advanced Settings 
   

 
Chapter 15    96 QAM Channel Software  
 
 
234 78-4025112-01 Rev H0 
Monitoring 
The RF Port output monitoring now includes the ability to monitor all 8 outputs per 
RF port. 
 
  

 
 
 Network Management 
 
78-4025112-01 Rev H0 235 
 
Network Management 
Operating in the 96-QAM channel mode provides SNMP monitoring and 
management as in the 48-channel mode. The following proprietary MIBs are now 
fully 96 QAM-channel compatible: 
1 CISCO-RFGW-1-MIB.my 
2 CISCO-RFGW-1-MIB.Support 
3 CISCO-RFGW-1-OLS-MIB.mib 
4 CISCO-RFGW-1-PROD-MIB.mib 
5 CISCO-RFGW-1-SCRAMBLING-MIB.mib 
6 CISCO-RFGW-1-TRAP-MIB.mib