Home > Cisco > TelePresence System > Cisco C40 Manual

Cisco C40 Manual

Here you can view all the pages of manual Cisco C40 Manual. The Cisco manuals for TelePresence System are available online for free. You can easily download all the documents as PDF.

Page 81

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
81
Network [1..1] IPv6 Address
Enter the static IPv6 network address for the system. This setting is only applicable when the 
Network IPv6 Assignment is set to Static.
Requires user role:  ADMIN
Value space:  
Format:  A valid IPv6 address.
Example:
 Network 1 IP v6 Add ress: "2001:0DB8:0000:0000:0000:0000:0000:0002"
Network [1..1]...

Page 82

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
82
Network [1..1] QoS Mode
The QoS (Quality of Service) is a method which handles the priority of audio, video and data in 
the network. The QoS settings must be supported by the infrastructure. Diffserv (Differentiated 
Services) is a computer networking architecture that specifies a simple, scalable and coarse-
grained mechanism for...

Page 83

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
83
Network [1..1] QoS Diffserv Signalling
Note: This setting will only take effect if Network QoS Mode is set to Diffserv.
Define which priority Signalling packets that are deemed critical (time-sensitive) for the real-
time operation should have in the IP network. 
The priority for the packets ranges from 0 to 63 - the higher the number,...

Page 84

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
84
Network [1..1] IEEE8021X TlsVerify
Verification of the server-side certificate of an IEEE802.1x connection against the certificates in 
the local CA-list when TLS is used. The CA-list must be uploaded to the video system. This can 
be done from the web interface.
This setting takes effect only when Network [1..1] IEEE8021X Eap Tls is...

Page 85

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
85
Network [1..1] IEEE8021X Eap Ttls
Set the T TLS (Tunneled Transport Layer Security) mode. Authenticates LAN clients without the 
need for client certificates. Developed by Funk Software and Certicom. Usually supported by 
Agere Systems, Proxim and Avaya. 
Requires user role:  ADMIN
Value space:  
Off:  The EAP-T TLS protocol is disabled....

Page 86

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
86
Network [1..1] RemoteAccess Allow
Filter IP addresses for access to ssh/telnet/HT TP/HT TPS.
Requires user role:  ADMIN
Value space:  
Format:  String with a maximum of 255 characters, comma separated IP adresses or IP 
range.
Example:
 N e t w o r k  1  R e m o t e A c c e s s  A l l o w:  "19 2.16 8.1.2 31,  19 2.16 8.1.18 2 "...

Page 87

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
87
NetworkPort settings
NetworkPort [2] Mode
Define if the network port 2 shall be enabled for direct pairing with a Cisco TelePresence Touch 
controller.
NOTE: Restart the system for any change to this setting to take effect.
Requires user role:  ADMIN
Value space:  
Inactive:  Set the NetworkPort 2 to Inactive when no device is connected....

Page 88

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
88
NetworkServices settings
NetworkServices H323 Mode
Determine whether the system should be able to place and receive H.323 calls or not.
Requires user role:  ADMIN
Value space:  
Off:  Disable the possibility to place and receive H.323 calls.
On:  Enable the possibility to place and receive H.323 calls (default).
Example:
 NetworkServices...

Page 89

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
89
NetworkServices MultiWay Address
The MultiWay address must be equal to the Conference Factory Alias, as configured on the 
Video Communication Server. The Multiway™ conferencing enables video endpoint users to 
introduce a 3rd party into an existing call.
Multiway™ can be used in the following situations:
1) When you want to add someone...

Page 90

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
90
NetworkServices HTTPS OCSP Mode
Define the support for OCSP (Online Certificate Status Protocol) responder services. The OCSP 
feature allows users to enable OCSP instead of certificate revocation lists (CRLs) to check the 
certificate status.
For any outgoing HT TPS connection, the OCSP responder is queried of the status. If the...
Start reading Cisco C40 Manual

Related Manuals for Cisco C40 Manual

All Cisco manuals