Cisco C40 Manual

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
111
Video Input Source [1..3] OptimalDefinition Threshold60fps
For each video input, this setting tells the system the lowest resolution where it should transmit 
60fps. So for all resolutions lower than this, the maximum transmitted framerate would be 
30fps, while above this resolution 60fps would also be possible, if the available...

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
112
Video Input DVI [3]/[2,3] RGBQuantizationRange
NOTE: Codec C40 has one DVI input (DVI-I 3). Codec C60 has two DVI inputs (DVI-I 2 and 3).
All devices with DVI inputs should follow the rules for RGB video quantization range defined in 
CEA-861. Unfortunately some devices do not follow the standard and this configuration may be 
used to...

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
11 3
Video Layout ScaleToFrame
Define what to do if the aspect ratio of a video input source doesn't match the aspect ratio of 
the corresponding image frame in a composition. For example if you have a 4:3 input source 
(like XGA) to be displayed on a 16:9 output (like HD720).
Requires user role:  ADMIN
Value space:  
Manual:  If the...

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
114
Video SelfviewDefault Mode
Determine if the main video source (self view) shall be displayed on screen after a call. 
The position and size of the self view window is determined by the Video SelfviewDefault 
PIPPosition and the Video Selfview FullscreenMode settings respectively.
This setting obsoletes the Video Selfview setting as from...

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
11 5
Video CamCtrlPip CallSetup Mode
This setting is used to switch on self view for a short while when setting up a call. The Video 
CamCtrlPip CallSetup Duration setting determines for how long it remains on. This applies when 
self view in general is switched off.
Requires user role:  ADMIN
Value space:  
Off:  Self view is not shown...

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
11 6
Video Layout DisableDisconnectedLocalOutputs
Prevent the built-in layout engine from setting layouts on local outputs that have no monitor 
connected.
Requires user role:  ADMIN
Value space:  
Off:  The built-in layout engine sets layout on all local outputs, also the ones not having any 
monitor connected.
On:  The built-in layout...

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
117
Video Layout RemoteLayoutFamily
Select which video layout family to be used for the remote participants.
Requires user role:  ADMIN
Value space:  
Auto:  The default layout family, as given by the local layout database, will be used as 
the remote layout. For more information about the layout database, see the command: 
xCommand Video...

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
11 8
Video OSD LanguageSelection
Applies to the on screen menu (OSD). The language selection menu can be hidden outside the 
administrator settings menu and visible inside, or it can be visible both inside and outside the 
administrator settings menu. The administrator settings menu can be password protected.
Requires user role:  ADMIN
Value...

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
11 9
Video OSD MissedCallsNotification
Determine whether or not the OSD (On Screen Display) shall display a missed calls notification 
dialog box if there have been incoming calls that have not been answered. The setting only 
applies when the video system is operated by a remote control and the on-screen menu. When 
using a Touch controller...

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
12 0
Video OSD InputMethod InputLanguage
The codec can be enabled for Cyrillic input characters in the menus on screen. NOTE: Requires 
that Video OSD inputMethod Cyrillic is set to On.
Requires user role:  ADMIN
Value space:  
Latin:  Latin characters can be entered when using the remote control (default).
Cyrillic:  Cyrillic characters can...