Cisco 891 F Manual

 
4-5
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 4      Initial Configuration
  Verifying the Initial Configuration
!no ip routing
!
interface FastEthernet0no shutdown
speed 100
duplex autoip address 172.1.2.3 255.255.0.0
!
Step 12Respond to the following prompts. Enter 2 to save the initial configuration.
[0] Go to the IOS command prompt without saving this config.[1] Return back to the setup without saving this...

 
4-6
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 4      Initial Configuration
  Initial Configuration of the Wireless Access Point
For information on how to do basic wireless configuration on your router see the “Basic Wireless 
Device” chapter of the Cisco 860 Series, Cisco 880, and Cisco 890 Series Integrated Services Routers 
Software Configuration Guide. 

 
A-1
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
APPENDIXA
Technical Specifications
This appendix provides router, port, and cabling specifications for the Cisco 860 series, Cisco 880 series, 
and Cisco 890 series Integrated Services Routers (ISRs). It contains the following sections:
 Router Specifications, page A-2
 Wireless Access Point, page A-3
 FE and GE Port Pinouts, page A-3
 Console and Auxiliary Port Connector...

 
A-2
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Appendix A      Technical Specifications
  Router Specifications
Router Specifications
Ta b l e A-1 lists the system specifications for the routers. 
Ta b l e A-1 Router Specifications 
DescriptionDesign Specification
Physical Dimensions
Dimensions with antenna and rubber feet 
(H
 x W x D)
1.9 x 12.8 x 10.4 in.
Weight (not including desktop power supply)5.5 lb (2.5 kg),...

 
A-3
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Appendix A      Technical Specifications
  Wireless Access Point
Wireless Access Point
Ta b l e A-2 lists the specifications for the wireless access point (AP). 
FE and GE Port Pinouts
Ta b l e A-3 lists the pinouts for the Ethernet ports.
Ta b l e A-2 Wireless Access Point Specifications 
DescriptionDesign Specification
Radio technologyIEEE 802.11n draft 2.0 standard...

 
A-4
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Appendix A      Technical Specifications
  Console and Auxiliary Port Connector Pinouts
Console and Auxiliary Port Connector Pinouts
Ta b l e A-4 lists the pinouts for the console and auxiliary port connectors.
FXS and FXO Port Connector Pinouts
Ta b l e A-6 lists the FXS and FXO connector pinouts.
VDSL2 Port Connector Pinouts
Ta b l e A-6 lists the VDSL2 connector pinouts....

 
A-5
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Appendix A      Technical Specifications
  ADSL2+ Port Connector Pinouts
ADSL2+  Port Connector Pinouts
Ta b l e A-6 lists the ADSL2+  connector pinouts.
V.92 Port Connector Pinouts
Ta b l e A-8 lists the V.92 connector pinouts.
5Unused
6Unused
Table A-6 VDSL2 Connector Pinouts (RJ-11-to-RJ-45) (continued)
RJ-11 Pin Function
Ta b l e A-7 ADSL2+  Connector Pinouts (RJ-11)...

 
A-6
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Appendix A      Technical Specifications
  G.SHDSL Port Connector Pinouts
G.SHDSL Port Connector Pinouts
Ta b l e A-9 lists the pinouts for the global industry standard symmetrical high-speed DSL (G.SHDSL) 
WAN port.
Data BRI Port Connector Pinouts
Ta b l e A-10 lists the pinouts for the Data BRI port.
Voice ISDN BRI Interface Pin Numbers and Functions
Ta b l e A-11lists the...

 
A-7
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Appendix A      Technical Specifications
  Cable Specifications
Cable Specifications
This section provides specifications for the following Ethernet cables:
 Straight-through cable
 Crossover cable
Because of the autocrossover (autosensing) function, both straight-through and crossover cables can be 
used for the Ethernet LAN port.
Ethernet Cable Specifications
Ta b l e A-12...

 
A-8
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Appendix A      Technical Specifications
  Cable Specifications