Cisco 891 F Manual

 
3-13
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting a Data BRI Port
Figure 3-12 Antenna connected to the 3G Card
Step 7Clean the flat surface to which you will affix the antenna.
Step 8Remove the protective tape from the adhesive on the bottom of the antenna cradle, then firmly press the 
cradle to the flat surface. 
Connecting a Data BRI Port
You can connect the Data BRI port...

 
3-14
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting a Data BRI Port
Although the following procedure shows a Cisco 888W data router, this procedure applies to all 
Cisco
 880 series router with a Data BRI port.
To connect the Data BRI port to the ISDN service provider, follow these steps:
Step 1Connect one end of the orange ISDN S/T cable to the Data BRI port on the router....

 
3-15
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting an FE Line to an FE WAN Port
Connecting an FE Line to an FE WAN Port
To connect the Fast Ethernet (FE) WAN port on the router, follow these steps:
Step 1Connect one end of the yellow cable to the FE WAN port as shown in Figure 3-14.
Figure 3-14 Connecting the FE WAN Port
Step 2Connect the other end of cable to an available...

 
3-16
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting an GE Line to an GE WAN Port
Connecting an GE Line to an GE WAN Port
To connect the Gigabit Ethernet (GE) WAN port on the router, follow these steps:
Step 1Connect one end of the yellow cable to the GE WAN port as shown in Figure 3-14.
Figure 3-15 Connecting the GE WAN Port
Step 2Connect the other end of cable to an available...

 
3-17
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting an xDSL Line
Connecting an xDSL Line 
WarningHazardous network voltages are present in WAN ports regardless of whether power to the unit is OFF 
or ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables, 
detach the end away from the unit first. Statement 1026
To connect the router to a...

 
3-18
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting Power over Ethernet
Connecting Power over Ethernet
WarningThis unit might have more than one power supply connection. All connections must be removed to 
de-energize the unit. Statement 1028
Figure 3-17 shows how to connect the 48-VDC Power over Ethernet (PoE) power adapter to your router. 
The PoE adapter provides power to...

 
3-19
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting the AC Adapter
WarningThis product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that 
a fuse or circuit breaker no larger than 120VAC, 20A U.S. (240VAC, 16 to 20A international) is used on 
the phase conductors (all current-carrying conductors). The fuse or circuit breaker must have...

 
3-20
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting the AC Adapter
Step 2To secure the power cord to the router, attach the power lock clip to the power cord, and slide the clip to 
the end of the DC plug. See 
Figure 3-19.
Figure 3-19 Securing the Power Cord
1Power lock clip3DC plug
2Power cord4Lock holes on either side of the power 
connector
270659
42
1
3 

 
3-21
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting an FXS Line
Step 3Snap the latches into the holes on either side of the power connector. See Figure 3-20.
Figure 3-20 Power Lock Clip Latched Into the Holes on Either Side of the Power Connector
Connecting an FXS Line
Use a standard straight-through RJ-11 modular telephone cable to connect an Foreign Exchange Service 
(FXS)...

 
3-22
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting an FXS Line
To connect the FXS line, follow these steps:
Step 1Connect one end of the straight-through RJ-11 cable to the FXS port. Figure 3-21 shows an FXS line 
connection.
Figure 3-21 Connecting an FXS Line
Step 2Connect the other end of the cable to the RJ-11 port on the fax or telephone machine.
1FXS port3RJ-11 port...