Cisco 891 F Manual

 
3-23
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting an FXO Line
Connecting an FXO Line
Use a straight-through RJ-11 cable to connect the Foreign Exchange Office (FXO) voice port to the 
PSTN or PBX through a telephone wall outlet.
WarningHazardous network voltages are present in WAN ports regardless of whether power to the unit is OFF 
or ON. To avoid electric shock, use...

 
3-24
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting a Voice ISDN BRI Line
NoteIf you have specified the use of a private line automatic ringdown (PLAR) off-premises extension (OPX) 
connection mode for an  FXO voice port (with loop resistance less than 8000 Ohm), you must ensure 
that the soft-offhook option is enabled on the port.
 
 
This option allows a stepped offhook...

 
3-25
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting a Voice ISDN BRI Line
Figure 3-23 shows a voice BRI line connection.
Figure 3-23 Connecting a Voice BRI Line
Step 2Connect the other end of the cable to the RJ-45 telephone outlet or other device. 
1Voice BRI port3Telephone outlet
2RJ-45 cable
241906
1
3
2 

 
3-26
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Verifying Connections
Verifying Connections
To verify that all devices are properly connected to the router, first turn on all the connected devices. 
Then check the LEDs. To verify router operation, refer to 
Ta b l e 3-1.
For full LED description see Ta b l e 1-1 “LED Descriptions for the Cisco 860 Series, Cisco 880 Series, 
and Cisco...

 
3-27
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Verifying Connections
To wireless LANWLAN LINKWireless LAN link status: 
 Green if at least one client is associated.
 Off if no client is associated.
WLAN 2.4 GHzWireless LAN 2.4-GHz status:
 Green when radio is connected, SSID13 is configured, 
signal is being transmitted, and client is associated.
 Slow blinking when radio is...

 
3-28
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Verifying Connections 

CH A P T E R
 
4-1
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
4
Initial Configuration
This chapter provides instructions for initial configuration of the Cisco 860 series,  880 series, and 890 
series Integrated Services Routers (ISRs). For the initial configuration, we recommend using 
Cisco
 Configuration Professional (CP) Express. Cisco CP Express is a web-based graphical user 
interface that guides you through initial...

 
4-2
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 4      Initial Configuration
  Cisco IOS CLI
To configure the initial router settings using the Cisco IOS CLI, follow these steps:
Step 1Set up a console connection to your router. The following message is displayed:
...
router con0 is now available
Step 2Press Return or Enter. The following message is displayed:
Cisco Configuration Professional Express (Cisco CP...

 
4-3
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 4      Initial Configuration
  Setup Command Facility
Step 6Verify the initial configuration. See the “Verifying the Initial Configuration” section on page 4-5.
Setup Command Facility
The setup command facility guides you through the configuration process by prompting you for the 
specific information that is needed to configure your system. Use the setup command...

 
4-4
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 4      Initial Configuration
  Setup Command Facility
Basic management setup configures only enough connectivityfor management of the system, extended setup will ask you
to configure each interface on the system
Would you like to enter basic management setup? [yes/no]: yes
Step 5Enter a hostname for the router (this example uses Router):
Configuring global...