Christie Projector Mirage S+/HD/WU User Manual

 Section 6: Specifications 
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  6-7 020-100001-07 Rev. 1 (11-2009) 
Lenses (HD) 
0.67:1 fixed  (104-110101-01) 1.38-1.84:1 zoom  (104-112101-01) 
1.1:1 fixed FP  (104-111101-01) 1.84-2.58:1 zoom  (104-113101-01) 
1.1:1 fixed RP  (104-116101-01) 2.58-4.15:1 zoom  (104-114101-01) 
1.16-1.49:1 zoom  (104-137101-01) 4.15-6.74:1 zoom  (104-115101-01) 
  
6.9-10.4:1 zoom  (104-130101-01) 
  
                  
Optional Input...

Appendix A 
Keypad Reference 
 
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  A-1 020-100001-07 Rev. 1 (11-2009) 
NOTE: The IR remote is a standard component provided with the projector. Use the 
extension cable also provided to convert the IR remote to a wired remote, if desired.  
Refer to Section 3 for a specific description of each key and how to use them 
correctly. 
Note: N/A on WU Models
 
* Toggle keys, which require you to either, press and hold, or press twice or press...

Appendix B 
Serial Communication 
Cables 
 
Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User Manual  B-1 020-100001-07 Rev. 1 (11-2009) 
A serial link of RS232 or RS422 enables ASCII communication with the projector so 
that it can be controlled remotely from a PC or other controller. From a PC, connect a 
standard nine-wire RS232 serial cable to the 
RS232 IN port. Or, for long-distance 
(>100 ft.) links with an RS422-compatible PC or controller, connect RS422 cable to 
the 
RS422 port. 
 
 
 
  

Appendix C 
System Integration 
 
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  C-1 020-100001-07 Rev. 1 (11-2009) 
The GPIO (General Purpose Input Output) connector located on the input panel provides a flexible 
method of interfacing a wide range of external I/O devices to the projector. There are seven GIO pins 
available on the nine-pin D-Sub GPIO connector, which are configurable via RS232 commands. The 
other two pins are reserved for ground and power – see table below for...

Appendix C: System Integration   
C-2  Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  020-100001-07 Rev. 1 (11-2009) 
Query Command 
(GIO?)  Request the state and configuration of all pins 
(GIO! “HHLLHLH” “OOIOOOI”)   Reply of pin state and configuration 
(GIO? C2)  Request configuration for pin #2 
(GIO! C2 O)  Reply with pin #2 configuration as output 
(GIO? 2)  Request the state of pin #2 
(GIO! H)  Reply with pin #2 state as high 
 
Real Time Event 
Use the serial command RTE...

Appendix D 
Optional Input Modules 
 
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  D-1 020-100001-07 Rev. 1 (11-2009) 
There are many optional input modules and accessories currently available for this 
projector. Contact your dealer for a complete and up-to-date listing. 
 
The RGB500 Input Module may be installed in this projector, a Marquee Signal 
Switcher, or a Marquee Case/Power Supply. The module receives analog RGB input 
signals from computers or other RGB source...

Appendix D: Optional Input Modules  
D-2  Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  020-100001-07 Rev. 1 (11-2009) 
The RGB400 ALT Input Module may be installed in this projector, a Marquee Signal 
Switcher, or a Marquee Case/Power Supply. The module receives analog RGB input 
signals from computers or other RGB source devices. Video inputs are 75
 
terminated. Video outputs provide buffered loop-through to another display device. 
 
RGB400ALT Features 
 Accepts 3, 4, or 5...