Christie Projector Mirage Hd20k J Technical Manual

J Series Serial Commands Technical Reference Information51 of 90020-100796-01 Rev. 1 (10-2011)
(LCB) Lens System Calibration con’t
MNZF Enable manual zoom/focus control. When set the zoom and focus 
motors are de-energized and will not be under the control of ILS. 
Zoom and focus will be adjustable by hand. If not set, all lens 
motors will be under ILS control and users should not attempt to 
adjust manually, as this will damage the motors. 
LOCK Lock all lens motors, preventing the lens from moving....

52 of 90J Series Serial Commands Technical Reference Information020-100796-01 Rev. 1 (10-2011)
(LDT) LEVEL DETECTOR 
CONTROL GROUP: Unsaved     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
This Level Detector control changes the gamma table settings to make it easy for the user to adjust the input lev-
els. It causes the data to be processed so that all levels below a specified value are set to black (0) and all above 
and including it are set to white (1024). This control takes place...

J Series Serial Commands Technical Reference Information53 of 90020-100796-01 Rev. 1 (10-2011)
(LLC) LITELOC CALIBRATION 
CONTROL GROUP: Preference     SUBCLASS: Power Up           ACCESS LEVEL: Service
DESCRIPTION
Calibrate the LiteLoc sensor. This control will be disabled until the projector is ready to be calibrated, so the fol-
lowing conditions must be met first:
i) The projector must have Dual lamps on.
ii) The lamps must have warmed up for at least 5 minutes.
The calibration will take...

54 of 90J Series Serial Commands Technical Reference Information020-100796-01 Rev. 1 (10-2011)
(LOC) LOCAL SETTINGS 
CONTROL GROUP: Preference     SUBCLASS: Power Down           ACCESS LEVEL: Advanced
DESCRIPTION
Set the localization options such as Language and display options for temperature units. 
SUBCODE
LANG
DESCRIPTION OF USE
Set the system language:
0 - English
1 - French
2 - German
3 - Spanish
4 - Italian
5 - Chinese
6 - Japanese
7 - Korean
TEMP Set the temperature units. 
0 - Celsius
1 -...

J Series Serial Commands Technical Reference Information55 of 90020-100796-01 Rev. 1 (10-2011)
(LPI) LAMP INTENSITY 
CONTROL GROUP: Preference     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Adjust the lamp intensity (% of full).
SUBCODE

DESCRIPTION OF USE
Set lamp intensity.
EXAMPLE:
(LPI 80) - Set the intensity set point to 80. 
(LPL) LAMP LIFE 
CONTROL GROUP: Saved     SUBCLASS: Power Down           ACCESS LEVEL: Operator
DESCRIPTION
Set the number of lamp hours of usage at which...

56 of 90J Series Serial Commands Technical Reference Information020-100796-01 Rev. 1 (10-2011)
(LPP) LAMP POWER
CONTROL GROUP: Preference     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Set the lamp power in Watts. This actually scales the power to lamp gain, the true control parameter. 
The Power control represents the amount of power sent to the lamps. Power increases when operating in Intensity 
mode, until it reaches its maximum. The value remains stable when in Max Brightness or...

J Series Serial Commands Technical Reference Information57 of 90020-100796-01 Rev. 1 (10-2011)
(MBE) Message Box Enable con’t
EXAMPLES:
(MBE+AUTO ?) - Get current auto message boxes enable state. 
(MBE+ AUTO 0) - Set auto message boxes to not be displayed.
(MBE+AUTO 1) - Set auto message boxes to be displayed.
(MBE +USER ?) - Get current user message boxes enable state.
(MBE+USER 0) - Set user message boxes to not be displayed.
(MBE+USER 1) - Set user message boxes to be displayed.
(MCS) MENU CASCADING...

58 of 90J Series Serial Commands Technical Reference Information020-100796-01 Rev. 1 (10-2011)
(MFT) Menu Font con’t
SUBCODE

DESCRIPTION OF USE
View/Set Choose large font or small font as the font used by OSD.
EXAMPLES:
(MFT ?) - Get current font option used by the OSD. 0 is small font, 1 is large font. 
(MFT 1) - Use large font as the OSD font.
(MLK) CHANNEL MEMORY LOCK 
CONTROL GROUP: Channel     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Lock a channel from being edited....

J Series Serial Commands Technical Reference Information59 of 90020-100796-01 Rev. 1 (10-2011)
(MNU) MENU SETTINGS AND CONFIGURATION 
CONTROL GROUP: Preference     SUBCLASS: Power Down           ACCESS LEVEL: Operator
DESCRIPTION
Set menu type, view OSD state, read menu structure. 
SUBCODE
 
DESCRIPTION OF USE
View/change the current state of the OSD (0=presentation, 
1=main, 2=submenu).
EXAMPLE:
(MNU?)(MNU!0) 
(MSH) MENU SHIFT HORIZONTAL 
CONTROL GROUP: Preference     SUBCLASS: Power Up           ACCESS...

60 of 90J Series Serial Commands Technical Reference Information020-100796-01 Rev. 1 (10-2011)
(MSV) MENU SHIFT VERTICAL 
CONTROL GROUP: Preference     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Change the vertical position of the main menu. If the position is not from one of the preset positions, MSP will be 
changed to custom. 
SUBCODE

DESCRIPTION OF USE
View/set the vertical position of main menu.
EXAMPLES:
(MSV ?) - Get current vertical position of main menu. 
(MSV 50) - Set...