Christie Projector Mirage Hd20k J Technical Manual

J Series Serial Commands Technical Reference Information41 of 90020-100796-01 Rev. 1 (10-2011)
(FTB) Fade to Black con’t
SUBCODE

DESCRIPTION OF USE
Set the image intensity 0-1000, where 1000 = 100.0% image, and 
0 = 0% image (black)
TIME Set a fade time in milliseconds 0 - 10000. 
SLCT Select a fade. 0 = fade to black and 1 = fade back to image. 
EXAMPLES:
(FTB500) - Set image intensity to 50.0%. 
(FTB+TIME3000) - Set the fade time to 3 seconds.
(FTB+SLCT 0) - Fade to black over the time specified by....

42 of 90J Series Serial Commands Technical Reference Information020-100796-01 Rev. 1 (10-2011)
(GID) VIDEO DECODER GROUNDED INPUT SELECTION 
CONTROL GROUP: Option     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Set the input signal grounding method to single-ended or differential. Valid values are: 
0 = Differential (default) 
1 = Single-ended 
SUBCODE
SLxy
DESCRIPTION OF USE
Set the input signal grounding method for the specified slot and 
input.
EXAMPLES:
(GID+SL31 1) - Set...

J Series Serial Commands Technical Reference Information43 of 90020-100796-01 Rev. 1 (10-2011)
(GMS) VDIC GROUPED-INPUTS MODE 
CONTROL GROUP: Option     SUBCLASS: Power Down           ACCESS LEVEL: Operator
DESCRIPTION
Allows users to select a mode to group the last 3 BNC connectors (input 4/5/6) on a Video Decoder Input Card. 
valid options are: 
0 = 3 CVBS sources 
1 = 1 SVideo Source + 1 CVBS source 
2 = 1 YPrPb (Component) source 
SUBCODE
SLx0
DESCRIPTION OF USE
Set a grouping mode for the last 3 BNC...

44 of 90J Series Serial Commands Technical Reference Information020-100796-01 Rev. 1 (10-2011)
(GND) GREEN DRIVE 
CONTROL GROUP: Input     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
The green drive level is used to compensate for different amounts of attenuation between the Red, Green and Blue 
in the signal. Available on all cards expect the Video decoder. 
The correct setting achieves maximum contrast without crushing white or black. When the drive and black level 
controls are set...

J Series Serial Commands Technical Reference Information45 of 90020-100796-01 Rev. 1 (10-2011)
(GOO) Green Odd Pixel Offset con’t
SUBCODE
SLx0
DESCRIPTION OF USE
Set a green blacklevel offset for the second A to D.
EXAMPLE:
(GOO+SL10-10) - Set a green blacklevel offset to -10 on slot 1. 
(HDC) DHDIC DUAL-LINK CONFIGURATION 
CONTROL GROUP: Option     SUBCLASS: Power Down           ACCESS LEVEL: Operator
DESCRIPTION
Select whether to use the 2 inputs as separate inputs, or combined as a dual-link. Select...

46 of 90J Series Serial Commands Technical Reference Information020-100796-01 Rev. 1 (10-2011)
(HIS) Lamp History con’t
EXAMPLES:
(HIS?) 
(HIS!000 001 12A345B 20:00:27 23/09/2008 03:10:39 24/09/2008 2462732-00 010 000 0435)
(HIS!000 002 8995474C 10:10:39 23/09/2008 06:15:31 15/10/2008 2462732-00 005 001 0201) 
(HLP) SERIAL HELP 
CONTROL GROUP: Unsaved     SUBCLASS: Power Down           ACCESS LEVEL: Status
DESCRIPTION
Query a list of all available serial commands, with brief descriptions and current...

J Series Serial Commands Technical Reference Information47 of 90020-100796-01 Rev. 1 (10-2011)
(HOR) Horizontal Position con’t
EXAMPLES:
(HOR 500) - Set horizontal position to 500 on main video. 
(HOR+MAIN 500) - Set horizontal position to 500 on main video. 
(HOR+IN32 500) - Set horizontal position to 500 on slot 3 input 2. 
(HOR?) - Returns the horizontal position value on main video. 
(ILS) INTELLIGENT LENS SYSTEM  
CONTROL GROUP: Preference     SUBCLASS: Power Up           ACCESS LEVEL: Operator...

48 of 90J Series Serial Commands Technical Reference Information020-100796-01 Rev. 1 (10-2011)
(INM) Channel ‘In Menu’ con’t
PIIP or SECD Toggle In Menu for the channel being used by PIP or Secondary. 
EXAMPLES:
(INM?) - Get channel in-menu state for channel used by main. 
(INM+MAIN?) - Get channel in-menu state for channel used by main. 
(INM+PIIP?) - Get channel in-menu state for channel used by PIP. 
(INM 1) - Show in-menu for the channel being used by main. 
(INM+PIIP 1) - Show in-menu for the...

J Series Serial Commands Technical Reference Information49 of 90020-100796-01 Rev. 1 (10-2011)
(ITP) Internal Test Pattern con’t
EXAMPLES:
(ITP 0) - Disable test patterns - revert to previous input signal. 
(ITP 1) - Set test pattern to the grid pattern. 
(KEN) KEYPAD IR SENSOR DISABLE 
CONTROL GROUP: Preference     SUBCLASS: Power Down           ACCESS LEVEL: Operator
DESCRIPTION
Enable or disable the IR or wired keypad sensors. You cannot disable the keypad that is currently being used.
SUBCODE
FRNT...

50 of 90J Series Serial Commands Technical Reference Information020-100796-01 Rev. 1 (10-2011)
(LBL) Left Blanking con’t
MAIN  Set the left blanking for the main image. 
PIIP or SECD Set the left blanking for the PIP or Secondary image. 
EXAMPLES:
(LBL 40) - Set left blanking to 40 on main video. 
(LBL+MAIN 40) - Set left blanking to 40 on main video. 
(LBL+PIIP 40) - Set left blanking to 40 on PIP video. 
(LBL+IN32 40) - Set left blanking to 40 on slot 3 input 2. 
(LBL?) - Returns the left blanking...