Christie Projector Mirage 4K25 User Manual
Have a look at the manual Christie Projector Mirage 4K25 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 476 Christie manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Troubleshooting
Mirage 4K25 User Manual81
020-101361-02 Rev. 1 (01-2015)
Run the projector interrogator
The interrogator captures diagnostic information Christie personnel uses to help diagnose and
correct projector issues. If a projector issue cannot be resolved, Christie personnel may request an
interrogator file from the projector.
Log files are compressed into a standard zip file.
1. On the touch panel controller, tap Admin > Interrogator .
2. Tap Create File .
3. Click Continue .
4. In the Choose destination directory dialog, navigate to the location where you want to store the log file.
5. Tap Save.
Save TPC log files
TPC log files can help you identify and correct issu es with the touch panel controller. If a projector
issue cannot be resolved, Christie personnel may request a TPC log file from the projector.
Log files are compressed into a standard zip file.
1. On the touch panel controller, tap Admin > TPC Logs .
2. Tap Create File .
3. In the Choose destination directory dialog, navigate to the location where you want to store the log file.
4. Tape Save.
Specification Mirage 4K25 User Manual82 020-101361-02 Rev. 1 (01-2015) Specification This section provides detailed Mirage 4K25 specific ations. Due to continuing research, specifications are subject to change without notice. Display Panel Resolution and Refresh Rate Pixel format (H x V square pixels) 4096 x 2160 Processing path 23.97 - 60Hz Achievable Brightness (Measured at Screen Center) Nominal 2.0 kW (CDXL-20) 10,000 lumens 2.0 kW (CDXL-20SP) 10,000 lumens 3.0 kW (CDXL-30) 18,000 lumens 3.0 kW (CDXL-30SD) 25,000 lumens 3.0 kW (CDXL-30SP) 19,000 lumens Achievable Contrast Ratio 450:1 ANSI, up to 2000:1 Full Frame ON/OFF Color and Grayscale Resolution Displayable colors35.2 trillion Grayscale resolution 45 bits total linear, 25 bits per RGB component White Point Nominal white (full white, after calibration)y = 0.351 ± 0.002 x = 0.314 ± 0.002
Specification Mirage 4K25 User Manual83 020-101361-02 Rev. 1 (01-2015) Gamma Nominal 2.2 ± 5%
Specification Mirage 4K25 User Manual84 020-101361-02 Rev. 1 (01-2015) Mirage signal connectivity2D/ 3D Input Configuration 3D Type Input Format Frame Rate (Hz) Interface Cards Cables RGB/ 4:4:4 8-bit RGB/ 4:4:4 10-bit RGB/ 4:4:4 12-bit 4:2: 2 8- bit 4:2: 2 10- bit 4:2: 2 12- bit 3D Four-Port Direct 4K, QHD 120 DisplayPort 1.1a4x TDPIC 4 X X 3D Four-Port Direct 4K, QHD 120 DVI (Dual) 4x DDIC 4 X 3D Four-Port Dual- Input4K, QHD 60 DisplayPort 1.1a4x TDPIC 8 X X X X X 3D Four-Port Dual- Input4K, QHD 60 HDMI 1.4a 4x THIC 8 X X X X X X 3D Two-Port Dual- Input4K, QHD 60 DisplayPort 1.1a4x TDPIC 4 X X 3D Two-Port Dual- Input4K, QHD 60 DVI (Dual) 4x DDIC 4 X 3D Four-Port Dual- Input4K, QHD 60 3G-SDI 4x 3GIC 8 X 3D Four-Port Direct 4K, QHD 60 DisplayPort 1.1a2x TDPIC 4 X X X X X 3D Two-Port Direct 4K, QHD 60 DisplayPort 1.1a2x TDPIC 2 X X 3D Four-Port Direct 4K, QHD 60 HDMI 1.4a 2x THIC 4 X X X X X X 3D Four-Port Direct 4K, QHD 60 3G-SDI 2x 3GIC 4 X 3D Two-Port Direct 4K, QHD 60 DVI (Dual) 2x DDIC 2 X 3D Four-Port Direct 4K, QHD 60 DVI (Single) 4x DDIC 4 X 3D Four-Port Direct 4K, QHD 48, 50 DisplayPort 1.1a2x TDPIC 4 X X X X X 3D Two-Port Direct 4K, QHD 48, 50 DisplayPort 1.1a2x TDPIC 2 X X 3D Four-Port Direct 4K, QHD 48, 50 HDMI 1.4a 2X THIC 4 X X X X X X
Specification Mirage 4K25 User Manual85 020-101361-02 Rev. 1 (01-2015) 3D Two-Port Direct 4K, QHD 48, 50 DVI 2x DDIC 2 X 3D One-Port Dual- Input 2K, HD 60 DisplayPort 1.1a1x TDPIC 2 X X X X X 3D One-Port Dual- Input 2K, HD 60 HDMI 1.4a 1x THIC 2 X X X X X X 3D One-Port Dual- Input 2K, HD 60 3G-SDI 1x 3GIC 2 X 3D One-Port Dual- Input 2K, HD 60 DVI (Single) 2x DDIC 2 X 3D One-Port Direct 2K, HD 120 DisplayPort 1.1a1x TDPIC 1 X X 3D One-Port Direct 2K, HD 120 DVI (Dual) 1x DDIC 1 X 3D One-Port Direct 2K, HD 60 DisplayPort 1.1a1x TDPIC 1 X X X X X 3D One-Port Direct 2K, HD 60 HDMI 1.4a 1x THIC 1 X X X X X X 3D One-Port Direct 2K, HD 60 3G-SDI 1x 3GIC 1 X 3D One-Port Direct 2K, HD 60 DVI (Single) 1x DDIC 1 X 3D One-Port Direct 2K, HD 48, 50 DisplayPort 1.1a1x TDPIC 1 X X X X X 3D One-Port Direct 2K, HD 48, 50 HDMI 1.4a 1x THIC 1 X X X X X X 3D One-Port Direct 2K, HD 48, 50 3G-SDI 1x 3GIC 1 X 3D One-Port Direct 2K, HD 48, 50 DVI (Single) 1x DDIC 1 X 2D Four-Port 4K, QHD 120 DisplayPort 1.1a4x TDPIC 4 X X 2D Four-Port 4K, QHD 120 DVI (Dual) 4x DDIC 4 X 2D One-Port 2K, HD 120 DisplayPort 1.1a1x TDPIC 1 X X 2D One-Port 2K, HD 120 DVI (Dual) 1x DDIC 1 X2D/ 3D Input Configuration 3D Type Input Format Frame Rate (Hz) Interface Cards Cables RGB/ 4:4:4 8-bit RGB/ 4:4:4 10-bit RGB/ 4:4:4 12-bit 4:2: 2 8- bit 4:2: 2 10- bit 4:2: 2 12- bit
Specification Mirage 4K25 User Manual86 020-101361-02 Rev. 1 (01-2015) • 4K = 4096 x 2160 • QHD = 3840 x 2160 • 2K = 2048 x 1080 • HD = 1920 x 1080
Specification Mirage 4K25 User Manual87 020-101361-02 Rev. 1 (01-2015) Optional Input cards To determine which SDI signal types are officially supported, see Mirage signal connectivity on page 84. Control signal compatibility Input CardPart NumberAdditional Information Dual 3G SD/HD-SDI 108-313101-02+ Dual Link DVI 108-312101-02+ Analog signals are not supported for this input card; therefore VGA port and VGA to DVI co nverters are not supported. Twin HDMI 108-311101-XX Twin DisplayPort 108-451101-XX Ethernet Port Interface 10Base-T/100Base-TX Connector Female RJ-45 USB Connector Type B Interface USB to serial (bit rate identical to RS232) 3D Sync Connector BNC Male Interface TTL inputs and outputs RS422 Connector 9-pin subminiature D, female Bit rate 115,200 bps Data format 1 start bit, 8 data bits, 1 stop bit, no parity RS232 IN Connector 9-pin subminiature D, female Bit rate 115,200 bps Data format 1 start bit, 8 data bits, 1 stop bit, no parity
Specification Mirage 4K25 User Manual88 020-101361-02 Rev. 1 (01-2015) Temperature sensor thresholds The projector shutdowns within one minute of an error threshold being reached. RS232 OUT Connector 9-pin subminiature D, male Bit rate 115,200 bps Data format 1 start bit, 8 data bits, 1 stop bit, no parity LocationWarning (°C)Error ( °C)Remarks Integrator rod 110 120 Prism 60 70 Air intake 44 49 Lamp exhaust 85 95 MCPU 70 95 ABP 82 95 HIP scaler 82 95 HIP warp red 82 95 HIP warp green 82 95 HIP warp blue 82 95 Formatter red 82 95 DMD red 63 68 Formatter green 82 95 DMD green 63 68 Formatter blue 82 95 DMD blue 63 68 Option card 1 80 95 Option card 2 80 95 Option card 3 80 95 Option card 4 80 95 EVB 70 95 Lens MCB 75 95 v1.0x software only; removed in v1.1.0+ software Lamp MCB 70 95 v1.0x software only; removed in v1.1.0+ software
Specification Mirage 4K25 User Manual89 020-101361-02 Rev. 1 (01-2015) Warning thresholds for fans All fan warnings are set to ~75% of their normal operating speeds. Warning threshold for liquid cooling module Touch panel controller LocationWarning RPM Light engine intake (fan 5) 3300 Light engine intake (fan 6) 3300 Light engine intake (fan 8) 3300 Formatter—green blower (fan 7) 3500 Laminar airflow device (fan 4) 5900 Electronics intake (fan 10) 5700 Electronics intake (fan 11) 5700 Electronics intake (fan 12) 5700 Image processor warp blower (fan 9) 2400 Electronics exhaust (fan 1) 3400 Electronics exhaust (fan 2) 3400 Liquid cooling radiator (fan 3) 1800 Image processor scaler (fan 13) 5100 LocationWarning Flow meter0.2mL/min Liquid cooling pump 180 RPM TPC 650H Type of display Color VGA TFT LCD, backlit Display size 144.8 mm (5.7 inches) diagonal Display resolution (H x V pixels) 640 x 480 Maximum dimensions (W x H x D) 195 mm x 148 mm x 58 mm Integrated operating system Microsoft Windows® XPe Communication interface with projector 10/100/1000 BaseT Ethernet Power requirement 0.71A maximum at 24VDC ± 10% Interface connector 12-pin circular connector (push-pull)
Specification Mirage 4K25 User Manual90 020-101361-02 Rev. 1 (01-2015) Power requirements Lamp Physical specifications AC Input Voltage range 200 - 240 VAC Line frequency 50 - 60 Hz nominal Inrush current 45 A maximum Current consumption 23 A maximum (at 200 VAC) Power consumption 4500 W maximum Current rating of AC input 30 A maximum (specified wall breaker) Xenon Bubble Lamp Type Xenon bubble CDXL-20 1400W - 2000W CDXL-20SP 1400W - 2000W CDXL-30 2100W - 3000W CDXL-30SP 2100W - 3000W Average life CDXL-202400 hours CDXL-20SP 3200 hours CDXL-30 1500 hours CDXL-30SP 1900 hours Wait time between lamp strikes 2 minutes minimum NOTE: Projectors typically force a 10 minute cool down peri od. Make sure not to re-strike the lamp any sooner than two minutes into this co ol down period since hot re-strikes reduce lamp life. Overall size (L x W x H) (including lens moun t, stack, and feet) 1298 x 648 x 483 (mm) 51.1 x 25.5 x 19.0 (inches) Projector head weight