Christie Projector LX700 User Manual

41User's Manual
020-000119-01
Exit the PC Adjust Menu.
To store the adjusted data, select Store and then press the SELECT 
button. Move the red arrow pointer to one of the Mode 1 to 10 in 
which you want to store, and then press the SELECT button.
To reset the adjusted data, select Reset and press the SELECT 
button. A confirmation box appears and then select [Yes]. All 
adjustments will return to their previous figures.
To store the adjusted data. To clear the adjusted data.
To clear the adjusted...

42User's Manual
020-000119-01
Press the MENU button to display the On-Screen Menu. Use 
the Point 	buttons to move the red frame pointer to the 
Image Select Menu icon.1
2Use the Point !  buttons to move the red frame pointer to 
the desired image level and then press the SELECT button.IMAGE SELECT MENU
Normal picture level preset on the projector.Standard
Picture level with improved halftone for graphics.Real
User preset picture adjustment in the Image Adjust Menu. (p. 51)IMAGE 1–10
Image Level...

43User's Manual
020-000119-01
Screen Size Adjustment
Select the desired screen size that conforms to the input signal source.
Press the MENU button to display the On-Screen Menu. Use 
the Point 	 buttons to move the red frame pointer to the 
Screen Menu icon.1
Use the Point !  buttons to move the red frame pointer to 
the desired function and then press the SELECT button.2
NormalSCREEN MENU
Provide the image at the normal computer aspect ratio of 4:3.
Wide Tr u e
Provide the image in its original...

44User's Manual
020-000119-01
Select Digital zoom +. The On-Screen Menu disappears and “D. 
zoom +” appears. Press the SELECT button to expand the image 
size. Use the Point ! 	 buttons to pan the image. The Panning 
function can work only when the image is larger than the screen 
size.
You can also enter the Digital zoom + mode by pressing the 
D.ZOOM button on the remote control.Digital zoom +
Select Digital zoom –. The On-Screen Menu disappears and “D. 
Zoom –” appears. Press the SELECT button to...

45User's Manual
020-000119-01
AV SYSTEM MENU (VIDEO OR S-VIDEO)
AV SYSTEM MENU (COMPONENT VIDEO)
Video System Selection
Press the MENU button to display the On-Screen Menu. Use 
the Point 	 buttons to move the red frame pointer to the 
AV System Menu icon.
Use the Point !  buttons to move the red arrow pointer to 
the desired system and then press the SELECT button.
1
2
If the projector cannot reproduce proper video image, select a 
specific broadcast signal format from among PAL, SECAM, NTSC, 
NTSC...

46User's Manual
020-000119-01
Press the MENU button to display the On-Screen Menu. Use 
the Point 	 buttons to move the red frame pointer to the 
Image Select Menu icon.1
2Use the Point !  buttons to move the red frame pointer to 
the desired image level and then press the SELECT button.
IMAGE SELECT MENU
Image Level Selection
Move the red frame pointer to the desired 
level and press the SELECT button.Image Select Menu icon
Normal picture level preset on the projector.Standard
Picture level...

47User's Manual
020-000119-01
Screen Size Adjustment
Press the MENU button to display the On-Screen Menu. Use 
the Point 	 buttons to move the red frame pointer to the 
Screen Menu icon.
Use the Point !  buttons to move the red frame pointer to 
the desired function and then press the SELECT button.
1
2
Note:
 s 7IDECANNOTBEOPERATEDWHENhPvhIv
ORhIvISSELECTEDON!63YSTEM-ENUP	
SCREEN MENU
Provide the image at the wide screen ratio of 16:9.Wide
Provide the image at the normal video...

48User's Manual
020-000119-01
Keystone
This function is used to store or reset the keystone correction 
when the AC power cord is unplugged. Use the Point 	 buttons 
to switch between each option. 
  Store. . .  Keep the keystone correction even when the AC power 
cord is unplugged.
  Reset  . .  Release the keystone correction when the AC power 
cord is unplugged.
To correct keystone distortion, press the Select button. The 
Keystone dialog box appears. Use the Point ! 	 buttons to 
correct...

49User's Manual
020-000119-01
Press the MENU button to display the On-Screen Menu. Use 
the Point 	 buttons to move the red frame pointer to the 
Image Adjust Menu icon.1
2Use the Point !  buttons to move the red frame pointer to 
the desired item and then press the SELECT button to display 
the adjustment dialog box. Use the Point 	 buttons to 
adjust the setting value.IMAGE ADJUST  MENU
Press the Point  button to decrease contrast; press the Point 	 
button to increase the contrast (from 0 to...

50User's Manual
020-000119-01
Auto picture control
Use the Point 	 buttons to select the desired Auto picture 
control position (Off, L1 or L2).
  Off  . . . .  Auto picture control OFF position.
  L1 . . . . .  Auto picture control LEVEL 1 position.
  L2 . . . . .  Auto picture control LEVEL 2 position.
Clear the check mark if you do not want to apply the adjusted 
color data; select the check mark and then press the SELECT 
button. The check mark disappears.
Return to the COLOR MANAGEMENT POINTER....