Christie Projector LX700 User Manual

							41User's Manual
020-000119-01
Exit the PC Adjust Menu.
To store the adjusted data, select Store and then press the SELECT 
button. Move the red arrow pointer to one of the Mode 1 to 10 in 
which you want to store, and then press the SELECT button.
To reset the adjusted data, select Reset and press the SELECT 
button. A confirmation box appears and then select [Yes]. All 
adjustments will return to their previous figures.
To store the adjusted data. To clear the adjusted data.
To clear the adjusted data, select Mode free and then press the 
SELECT button. Move the red arrow pointer to the Mode that you 
want to clear and then press the SELECT button.Reset
Mode free
Store
Quit
This Mode has stored parameters.
Vacant
Values of “Total dots,” “Position 
H,” “Position V,” “Display area 
H,” and “Display area V.”
Close this dialog box.
Close this dialog box.
Confirmation box appears 
and then select [Yes].
Confirmation box appears 
and then select [Yes].
Computer Input
Rev. 1 (11/08) 
						

							42User's Manual
020-000119-01
Press the MENU button to display the On-Screen Menu. Use 
the Point 	buttons to move the red frame pointer to the 
Image Select Menu icon.1
2Use the Point !  buttons to move the red frame pointer to 
the desired image level and then press the SELECT button.IMAGE SELECT MENU
Normal picture level preset on the projector.Standard
Picture level with improved halftone for graphics.Real
User preset picture adjustment in the Image Adjust Menu. (p. 51)IMAGE 1–10
Image Level Selection
Menu Operation
Image Select Menu icon
Move the red frame pointer to the desired 
level and press the SELECT button.
Computer Input
Rev. 1 (11/08) 
						

							43User's Manual
020-000119-01
Screen Size Adjustment
Select the desired screen size that conforms to the input signal source.
Press the MENU button to display the On-Screen Menu. Use 
the Point 	 buttons to move the red frame pointer to the 
Screen Menu icon.1
Use the Point !  buttons to move the red frame pointer to 
the desired function and then press the SELECT button.2
NormalSCREEN MENU
Provide the image at the normal computer aspect ratio of 4:3.
Wide Tr u e
Provide the image in its original size. When the original image size 
is larger than the screen size (1024 x 768), the projector enters to 
the panning mode automatically. Use the Point ! 	 buttons 
to pan the image. When adjusted, the arrows will turn red. When 
reached to the correction limits, the arrows will disappear.
Provide the image to fit the wide video aspect ratio (16:9) by 
expanding the image width uniformly. This function can be used to 
provide the squeezed video signal at 16:9.
Full screen
Provides the full screen image.
Screen Menu icon
Move the red frame pointer to the desired 
function and press the SELECT button.
  Scale H/V ..............  Adjust the Horizontal/Vertical screen scale.
  H&V ......................  When set to “On,” the aspect ratio is fixed. 
The “Scale V” appears dimmed and becomes 
unavailable. Adjust “Scale H,” then the screen 
scale is automatically modified based on the 
aspect ratio. 
  Position H/V ..........  Adjust the Horizontal/Vertical screen position.
  Common ..............  Save the adjusted scale to all the inputs. 
Press the SELECT button at Common to 
display a confirmation box. To save the scale, 
press the SELECT button at “Yes.” When 
Custom is selected, the saved scale is used.
  Reset ....................  Reset the all adjusted values. Press the 
SELECT button at Reset to display a 
confirmation box. To reset, press the SELECT 
button at “Yes.” Custom
Note:
 s 7HENNOSIGNALISDETECTEDh.ORMALvIS
SETAUTOMATICALLYANDTHE!SPECTDIALOGBOX
DISAPPEARS
 s 4HEADJUSTABLERANGEFOR3CALE(6AND0OSITION
(6ISLIMITEDDEPENDINGONTHEINPUTSIGNAL
Press the SELECT button at Common or 
Reset, to display a confirmation box.
Computer Input
Adjust the screen scale and position manually with this function.
Press the SELECT button at Custom and the “Custom” is displayed 
on the screen for a few seconds. To display the Aspect dialog box, 
press the SELECT button at Custom again and then the Aspect 
dialog box appears.
Note:
 s 4HEPROJECTORCANNOTDISPLAYANYRESOLUTION
HIGHERTHANX)FYOURCOMPUTERS
SCREENRESOLUTIONISHIGHERTHANX
LOWERTHERESOLUTIONBEFORECONNECTINGTHE
PROJECTOR
 s 4HEIMAGEDATAOTHERTHAN8!X	IS
MODIFIEDTOFITTHESCREENSIZEININITIALMODE
 s 4RUE&ULLSCREENAND$IGITALZOOMnCANNOT
BESELECTEDWHENNOSIGNALISDETECTEDINTHE0#
3YSTEM-ENUP	
Rev. 1 (11/08) 
						

							44User's Manual
020-000119-01
Select Digital zoom +. The On-Screen Menu disappears and “D. 
zoom +” appears. Press the SELECT button to expand the image 
size. Use the Point ! 	 buttons to pan the image. The Panning 
function can work only when the image is larger than the screen 
size.
You can also enter the Digital zoom + mode by pressing the 
D.ZOOM button on the remote control.Digital zoom +
Select Digital zoom –. The On-Screen Menu disappears and “D. 
Zoom –” appears. Press the SELECT button to compress the image 
size. 
You can also enter the Digital zoom – mode by pressing the 
D.ZOOM button on the remote control.
To exit the Digital Zoom +/– mode, press any button except the 
D.ZOOM , SELECT, and Point buttons.Digital zoom –
For zooming in and out the images
Keystone
This function is used to store or reset the keystone correction 
when the AC power cord is unplugged. Use the Point 	 buttons 
to switch between each option. 
  Store. . .  Keep the keystone correction even when the AC power 
cord is unplugged.
  Reset  . .  Release the keystone correction when the AC power 
cord is unplugged.
To correct keystone distortion, press the Select button. The 
Keystone dialog box appears. Use the Point ! 	 buttons to 
correct keystone distortion. (p.33)
Ceiling 
Rear  Ceiling
When this function is set to “On,” the picture is top/bottom and 
left/right reversed. This function is used to project the image from a 
ceiling-mounted projector.
Rear
When this function is set to “On,” the picture is left/right reversed. 
This function is used to project the image from the rear of the   
screen.
Reset
This function returns all adjusted values to the factory default 
settings. Press the SELECT button at Reset to display a 
confirmation box. To reset, press the SELECT button at “Yes.”
SCREEN MENU
Move the red frame pointer to the desired 
function and press the SELECT button.
Computer Input
Exit the Screen Size Adjustment Menu.Quit
Note:
 s 4HEPANNINGFUNCTIONMAYNOTOPERATEPROPERLYIF
THESTORED-ODEINTHE0#!DJUST-ENUISUSED
P	
 s 4HEMINIMUMCOMPRESSIONRATIOCANBELIMITED
DEPENDINGONTHEINPUTSIGNALORWHENTHE
+EYSTONEFUNCTIONISWORKING
 s $IGITALZOOMnCANNOTBESELECTEDWHEN&ULL
SCREENOR4RUEISSELECTED
 s $IGITALZOOMnCANNOTBEOPERATEDWHEN#USTOM
ISSELECTED
Rev. 1 (11/08) 
						

							45User's Manual
020-000119-01
AV SYSTEM MENU (VIDEO OR S-VIDEO)
AV SYSTEM MENU (COMPONENT VIDEO)
Video System Selection
Press the MENU button to display the On-Screen Menu. Use 
the Point 	 buttons to move the red frame pointer to the 
AV System Menu icon.
Use the Point !  buttons to move the red arrow pointer to 
the desired system and then press the SELECT button.
1
2
If the projector cannot reproduce proper video image, select a 
specific broadcast signal format from among PAL, SECAM, NTSC, 
NTSC 4.43, PAL-M, and PAL-N. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
The projector automatically detects an incoming video signal, and 
adjusts itself to optimize its performance.
When the Video System is 1035i or 1080i, select the system 
manually.
If the projector cannot reproduce proper video image, select a 
specific component video signal format from among 480i, 575i, 
480p, 575p, 720p, 1035i, and 1080i. Auto
COMPONENT VIDEO SIGNAL FORMAT
Video Jack or S-Video Jack
Y, Pb/Cb, Pr/Cr Jacks
The projector automatically detects an incoming video system, and 
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system manually. Auto
AV System Menu icon
The selected system is displayed
Move the pointer to the desired 
system and press the SELECT button.
AV System Menu icon
The selected system is displayed.
Move the pointer to the desired 
system and press the SELECT button.
Video Input
Rev. 1 (11/08) 
						

							46User's Manual
020-000119-01
Press the MENU button to display the On-Screen Menu. Use 
the Point 	 buttons to move the red frame pointer to the 
Image Select Menu icon.1
2Use the Point !  buttons to move the red frame pointer to 
the desired image level and then press the SELECT button.
IMAGE SELECT MENU
Image Level Selection
Move the red frame pointer to the desired 
level and press the SELECT button.Image Select Menu icon
Normal picture level preset on the projector.Standard
Picture level adjusted with fine tone.Cinema
User preset picture adjustment in the Image Adjust Menu. (p. 51)IMAGE 1–10
Menu Operation
Video Input
Rev. 1 (11/08) 
						

							47User's Manual
020-000119-01
Screen Size Adjustment
Press the MENU button to display the On-Screen Menu. Use 
the Point 	 buttons to move the red frame pointer to the 
Screen Menu icon.
Use the Point !  buttons to move the red frame pointer to 
the desired function and then press the SELECT button.
1
2
Note:
 s 7IDECANNOTBEOPERATEDWHENhPvhIv
ORhIvISSELECTEDON!63YSTEM-ENUP	
SCREEN MENU
Provide the image at the wide screen ratio of 16:9.Wide
Provide the image at the normal video aspect ratio of 4:3.Normal
Move the red frame pointer to the desired 
function and press the SELECT button.Screen Menu icon
  Scale H/V ..............  Adjust the Horizontal/Vertical screen scale.
  H&V ......................  When set to “On,” the aspect ratio is fixed. 
The “Scale V” appears dimmed and becomes 
unavailable. Adjust “Scale H,” then the screen 
scale is automatically modified based on the 
aspect ratio. 
  Position H/V ..........  Adjust the Horizontal/Vertical screen position.
  Common ..............  Save the adjusted scale to all the inputs. 
Press the SELECT button at Common to 
display a confirmation box. To save the scale, 
press the SELECT button at “Yes.” When 
Custom is selected, the saved scale is used.
  Reset ....................  Reset the all adjusted values. Press the 
SELECT button at Reset to display a 
confirmation box. To reset, press the SELECT 
button at “Yes.” Custom
Note:
 s 7HENNOSIGNALISDETECTEDh.ORMALvIS
SETAUTOMATICALLYANDTHE!SPECTDIALOGBOX
DISAPPEARS
 s 4HEADJUSTABLERANGEFOR3CALE(6AND0OSITION
(6ISLIMITEDDEPENDINGONTHEINPUTSIGNAL
Press the SELECT button at Common or 
Reset, to display a confirmation box.
Video Input
Adjust the screen scale and position manually with this function.
Press the SELECT button at Custom and the “Custom” is displayed 
on the screen for a few seconds. To display the Aspect dialog box, 
press the SELECT button at Custom again and then the Aspect 
dialog box appears.
Rev. 1 (11/08) 
						

							48User's Manual
020-000119-01
Keystone
This function is used to store or reset the keystone correction 
when the AC power cord is unplugged. Use the Point 	 buttons 
to switch between each option. 
  Store. . .  Keep the keystone correction even when the AC power 
cord is unplugged.
  Reset  . .  Release the keystone correction when the AC power 
cord is unplugged.
To correct keystone distortion, press the Select button. The 
Keystone dialog box appears. Use the Point ! 	 buttons to 
correct keystone distortion. (p.33)
Ceiling 
Rear  Ceiling
When this function is set to “On,” the picture is top/bottom and 
left/right reversed. This function is used to project the image from a 
ceiling-mounted projector.
Rear
When this function is set to “On,” the picture is left/right reversed. 
This function is used to project the image from the rear of the   
screen.
Reset
This function returns all adjusted values to the factory default 
settings. Press the SELECT button at Reset to display a 
confirmation box. To reset, press the SELECT button at “Yes.”
SCREEN MENU
Move the red frame pointer to a function and 
press the SELECT button.
Video Input
Exit the Screen Size Adjustment Menu.Quit
Rev. 1 (11/08) 
						

							49User's Manual
020-000119-01
Press the MENU button to display the On-Screen Menu. Use 
the Point 	 buttons to move the red frame pointer to the 
Image Adjust Menu icon.1
2Use the Point !  buttons to move the red frame pointer to 
the desired item and then press the SELECT button to display 
the adjustment dialog box. Use the Point 	 buttons to 
adjust the setting value.IMAGE ADJUST  MENU
Press the Point  button to decrease contrast; press the Point 	 
button to increase the contrast (from 0 to 63).
Press the Point  button to decrease the brightness; press the 
Point 	 button to increase the brightness (from 0 to 63). Contrast
Brightness
Press the Point  button to decrease the intensity of the color; 
press the Point 	 button to increase the intensity of the color (from 
0 to 63).
Press the Point 	 buttons to adjust the tint value to obtain 
proper color balance (from 0 to 63).Color =
Tint =
Color Management
The Color Management function can be used to adjust the LEVEL, 
PHASE, and GAMMA of the selected display colors (except for 
black, white, and gray) on the screen and replace these colors with 
other colors if required.
You can store up to eight (8) color management data.
1Use the Point !  buttons to move the red frame pointer to 
Color Management, and then press the SELECT button. The 
projected image freezes, and the COLOR MANAGEMENT 
POINTER appears.
Use the Point ! 	 buttons to move the pointer to the 
spot where you want to adjust the color and then press the 
SELECT button. The COLOR SELECTION window appears, 
and the color in the center of the pointer is selected and you 
can adjust the color.2
Use the Point ! 	 buttons to adjust the LEVEL and 
PHASE of the color, and then press the SELECT button to 
confirm the setting. Then use the Point !  buttons to adjust 
the GAMMA for the color and press the SELECT button to 
accept the setting. After adjusting, press the SELECT button 
to go to the COLOR MANAGEMENT LIST.3
COLOR MANAGEMENT 
POINTER
POINTER MODE
Image Adjustment
Move the red frame pointer to the desired 
item and then press SELECT button.Image Adjust Menu icon
Use the Point 	 buttons to adjust the 
setting value.
COLOR SELECTION MODE
Go to the COLOR MANAGEMENT LIST.
LIST
Note:
 s $ISPLAYEDONLYIN6IDEO)NPUT
 s 4INTCANNOTBESELECTEDWHENTHEVIDEOSYSTEM
IS0!,3%#!-0!,
-OR0!,
.P	=
Picture Image
Rev. 1 (11/08) 
						

							50User's Manual
020-000119-01
Auto picture control
Use the Point 	 buttons to select the desired Auto picture 
control position (Off, L1 or L2).
  Off  . . . .  Auto picture control OFF position.
  L1 . . . . .  Auto picture control LEVEL 1 position.
  L2 . . . . .  Auto picture control LEVEL 2 position.
Clear the check mark if you do not want to apply the adjusted 
color data; select the check mark and then press the SELECT 
button. The check mark disappears.
Return to the COLOR MANAGEMENT POINTER. (If you press 
the MENU button on the side control or the remote control, it 
returns to the COLOR MANAGEMENT POINTER and you will 
need to reselect and readjust the color.)
Return to the IMAGE ADJUST Menu. Any settings that 
have been changed will not be stored. To store the changed 
settings, be sure to select “LIST” and go to the COLOR 
MANAGEMENT LIST.
LIST MODE
Return to the COLOR SELECTION mode so that you can 
readjust the setting for the color in that line. (This option is 
not available if the check mark is cleared.)
Select the DEL box if you want to delete the adjusted data. 
Press the SELECT button and a confirmation box appears and 
then select [Yes] 
Delete all the data in the list. Press the SELECT button and a 
confirmation box appears and then select [Yes].
The same function as stated above.
Level and phase 
adjustment palette.Gamma 
adjustment palette.
Color temp.
Use the Point 	 buttons to select the desired Color temp. level 
(High, Mid, Low, or XLow). 
COLOR M.
MENU
COLOR PALETTE
DEL
ALL DEL
COLOR M.
LISTCOLOR M.MENU
COLOR PALETTE
DEL
ALL DELMENUCOLOR M.
COLOR SELECTION MODE
LIST MODE
COLOR SELECTION MODE (continued)
In the COLOR MANAGEMENT LIST, the adjusted color data 
are checkmarked. You can decide whether or not to apply the 
adjusted color data in the list to the projected image (see 
below).4
MENU
The same function as stated above.
Picture Image
Advanced color
Use the Point 	 buttons to select the advanced color mode.
  Off  . . . .  Advanced color mode is “Off”.
  Auto  . . .  
Advanced color according to the type of image.
Rev. 1 (11/08)