Christie Projector LX700 User Manual

31User's Manual
020-000119-01
1
2
Press the MENU button to display the On-Screen 
Menu. Use the Point 
	 buttons to move the red 
frame pointer to the Sound Menu icon.
Press the VOLUME+/– buttons on the side control or on the 
remote control to adjust the volume of Audio Output. The 
volume dialog box appears on the screen for a few seconds.
Press the MUTE button on the remote control to temporarily 
turn off the AUDIO OUT. To turn the AUDIO OUT back on, 
press the MUTE button again or press the...

32User's Manual
020-000119-01
Operating with Remote Control
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons 
enables you to make the desired operation quickly without calling up the On-Screen Menu.
Press the ZOOM buttons on the remote control to zoom in 
and out the image.
ZOOM buttons
Press the FOCUS buttons on the remote control to adjust 
focus of the image.
FOCUS buttons
See page 30 for details.
LENS SHIFT button
Remote Control
D.ZOOM...

33User's Manual
020-000119-01
Press the FREEZE button on the remote control to freeze 
the picture on the screen. To cancel the FREEZE function, 
press the FREEZE button again or press any other button.
FREEZE button
FILTER button
Press and hold the FILTER button for more than five seconds 
to operate electrically operated filter to replace the filter.
KEYSTONE button
Reduce the upper width with 
Point ! button. Reduce the lower width 
with Point   button.  Reduce the left part with 
Point button....

34User's Manual
020-000119-01
Pointer Function
Pointer
Note:
 s 9OUCANCHOOSETHEPATTERNOF0OINTER!RROW&INGER$OT	INTHE
3ETTING-ENUP	
You can move the Pointer of the projector with the remote control to emphasize a part of the projected image.  
Press the POINTER button to activate the Pointer 
function.1
2
3
MOUSE POINTER button
POINTER button
To cancel the Pointer function, press the POINTER 
button again or press any other button. 
Use the MOUSE POINTER button to move the Pointer. 
Wireless...

35User's Manual
020-000119-01
Input Selection
Remote Control button operation
INPUT button
Press the INPUT button on the side control or the remote 
control. It switches to INPUT 1, INPUT 2, and INPUT 3 as 
you press the INPUT button.
Before using the INPUT button on the side control or the 
remote control, you must select a correct input source 
by On-Screen Menu and the latest input source will be 
displayed.
INPUT button
Input 1
Input 2
Input 3
Side Control/Remote control button 
operation
Press...

36User's Manual
020-000119-01
Computer Input Source Selection
WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )
Press the MENU button to display the On-Screen Menu. Use 
the Point 	 buttons to move the red frame pointer to the 
INPUT Menu icon.
Use the Point !  buttons to move the red arrow pointer 
to the desired input and then press the SELECT button. The 
Source Select Menu appears. 
1
2
Input 1
INPUT MENU
Use the Point !  buttons to select the desired source and 
then press the SELECT button.3...

37User's Manual
020-000119-01
When the video input signal is connected to the Y-
Pb/Cb-Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
When the video input signal is connected to the 
VIDEO jack, select Video.
When the video input signal is connected to the S-
VIDEO jack, select S-Video.
When connecting to video equipment, select the type of 
Video source in the Source Select Menu. 
WHEN SELECTING INPUT 3 (AV TERMINALS ) WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS )
When the video input signal is connected to the...

38User's Manual
020-000119-01
Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, 
WXGA, UXGA or WUXGA (refer to “Compatible Computer Specifications” on pages 78–79). If a computer is 
selected as a signal source, this projector automatically detects the signal format and tunes to project a proper 
image without any additional settings. (Some computers need to be set manually.) 
One of the following messages may appear...

39User's Manual
020-000119-01
Auto PC Adjustment
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical  
positions to conform to your computer. 
Press the MENU button to display the On-Screen Menu. Use 
the Point  	 buttons to move the red frame pointer to the 
PC Adjust Menu icon.1
2Use the Point !  buttons to move the red frame pointer 
to the AUTO PC adj. icon and then press the SELECT button 
twice.PC ADJUST  MENU Auto PC adj.
To store the...

40User's Manual
020-000119-01
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. 
Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. 
The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to 
recall the setting for a specific computer. 
Note:  The PC Adjust Menu cannot be operated when the digital signal input on...