Home > Christie > Projector > Christie Projector LX501 Manual

Christie Projector LX501 Manual

Here you can view all the pages of manual Christie Projector LX501 Manual. The Christie manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 1

LX501/LX601i
User Manual-Technical Guide
020-000503-01 

Page 2


				            

Page 3

1LX501/LX601i User Manual-Technical Guide 020-000503-01 Rev. 1 (03-2012)
Projector
LX501/LX601i  
User Manual-Technical Guide
User's Manual (detailed) - Operating Guide Technical
Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode
720 x 40037.9 85.0 VESA TEXT
640 x 480 31.5 59.9 VESA VGA (60Hz)
640 x 480 37.9 72.8 VESA VGA (72Hz)
640 x 480 37.5 75.0 VESA VGA (75Hz)
640 x 480 43.3 85.0 VESA VGA (85Hz)
800 x 600 35.2 56.3 VESA SVGA (56Hz)
800 x 600 37.9 60.3 VESA SVGA (60Hz)
800...

Page 4

2LX501/LX601i User Manual-Technical Guide 020-000503-01 Rev. 1 (03-2012)
Initial set signals
 Back porch (B)  Front porch (D)  Back porch (b)  Front porch (d)
 
Active video (C) 
Data Data
H. Sync.  V. Sync.
Sync (A)   Sync (a)Active video (c) 
Resolution 
(H x V)Horizontal signal timing (μs) Vertical signal timing (lines)
Signal mode
(A) (B) (C) (D) (a) (b) (c) (d)
720 x 4002.0 3.0 20.3 1.0 3 42 400 1 TEXT
640 x 480 3.8 1.9 25.4 0.6 2 33 480 10 VGA (60Hz)
640 x 480 1.3 4.1 20.3 0.8 3 28 480 9 VGA...

Page 5

3LX501/LX601i User Manual-Technical Guide 020-000503-01 Rev. 1 (03-2012)
ACOMPUTER IN1, BMONITOR OUT
D-sub 15pin mini shrink jack

•  Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive)
• H/V. sync. signal: TTL level (positive/negative)
• Composite sync. signal: TTL level

•  Video signal:  Y with composite sync, Analog, 1.0±0.1Vp-p, 75Ω terminated 
Cb/Pb, Analog, 0.7±0.1Vp-p, 75Ω terminated 
Cr/Pr, Analog, 0.7±0.1Vp-p 75Ω terminated
• System: 480i@60, 480p@60, 576i@50, 720p@50/60,...

Page 6

4LX501/LX601i User Manual-Technical Guide 020-000503-01 Rev. 1 (03-2012)
Connection to the ports (continued)
COMPUTER IN2  CG/Y, DB/Cb/Pb,
 ER/Cr/Pr, FH, GV
BNC jack x5

•  Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive)
• H/V. sync. signal: TTL level (positive/negative)
• Composite sync. signal: TTL level

•  Video signal:  Y with composite sync, Analog, 1.0±0.1Vp-p, 75Ω terminated 
Cb/Pb, Analog, 0.7±0.1Vp-p, 75Ω terminated 
Cr/Pr, Analog, 0.7±0.1Vp-p 75Ω terminated
• System:...

Page 7

5LX501/LX601i User Manual-Technical Guide 020-000503-01 Rev. 1 (03-2012)
MS-VIDEO
Mini DIN 4pin jack
•  S-video signal, Analog: 
-Brightness signal with composite sync, 1.0±0.1Vp-p, 75Ω terminated 
-Color signal,   0.286Vp-p (NTSC, burst), 75Ω terminated 
0.300Vp-p (PAL/SECAM, burst) 75Ω terminated
• System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL(60Hz)
Pin Signal
1 C (color signal) 
2 Y (brightness signal)
3 Ground
4 Ground
Connection to the ports (continued)
NVIDEO
RCA jack
• Composite video...

Page 8

6LX501/LX601i User Manual-Technical Guide 020-000503-01 Rev. 1 (03-2012)
Connection to the ports (continued)
OAUDIO IN1, PAUDIO IN2
Ø3.5 stereo mini jack
• 
Analog, 500 mVrms, 47kΩ input impedance
AUDIO IN3  QL, RR  AUDIO OUT  SL, TR
RCA jack x2  RCA jack x2
• 
Analog, 500 mVrms, 47kΩ input impedance • Analog, 500 mVrms, 1kΩ output impedance
UCONTROL
D-sub 9pin plug
*  About the details of RS-232C communication,  
please refer to the next section.
Pin Signal Pin Signal Pin Signal
1 (No connection) 4 (No...

Page 9

7LX501/LX601i User Manual-Technical Guide 020-000503-01 Rev. 1 (03-2012)
REMOTE CONTROL  YIN, ZOUT
Ø3.5 stereo mini jack
Connection to the ports (continued)
XUSB TYPE B
USB B type jack
Pin Signal
1 +5V
2 - Data
3 + Data
4 Ground
VLAN
RJ-45 jack
*  About the details of network communication,  
please refer to the Network Guide.
Pin Signal Pin Signal Pin Signal
1 TX+ 4- 7-
2 TX- 5 -8-
3 RX+ 6 RX-
WUSB TYPE A
USB A type jack x2
Pin Signal
1 +5V
2 - Data
3 + Data
4 Ground
ƒ †…
„
ƒ‡†
… „ˆŠ
‰
ƒ...

Page 10

8LX501/LX601i User Manual-Technical Guide 020-000503-01 Rev. 1 (03-2012)
To input SCART RGB signal;
  ex.
Video
G
B
R
Audio L
Audio R
Connection to the ports (continued)
To input SCART RGB signal to the projector, use a SCART to RCA cable. 
Connect the plugs refer to above ex. For more reference, please consult your 
dealer.
SCART 
connector
(jack)SCART cable
(plug)RCA plugs 
Start reading Christie Projector LX501 Manual

Related Manuals for Christie Projector LX501 Manual

All Christie manuals