Christie Projector LX501 Manual

							LX501/LX601i
User Manual-Technical Guide
020-000503-01 
						

							1LX501/LX601i User Manual-Technical Guide 020-000503-01 Rev. 1 (03-2012)
Projector
LX501/LX601i  
User Manual-Technical Guide
User's Manual (detailed) - Operating Guide Technical
Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode
720 x 40037.9 85.0 VESA TEXT
640 x 480 31.5 59.9 VESA VGA (60Hz)
640 x 480 37.9 72.8 VESA VGA (72Hz)
640 x 480 37.5 75.0 VESA VGA (75Hz)
640 x 480 43.3 85.0 VESA VGA (85Hz)
800 x 600 35.2 56.3 VESA SVGA (56Hz)
800 x 600 37.9 60.3 VESA SVGA (60Hz)
800 x 600 48.1 72.2 VESA SVGA (72Hz)
800 x 600 46.9 75.0 VESA SVGA (75Hz)
800 x 600 53.7 85.1 VESA SVGA (85Hz)
832 x 624 49.7 74.5 Mac 16” mode
1024 x 768 48.4 60.0 VESA XGA (60Hz)
1024 x 768 56.5 70.1 VESA XGA (70Hz)
1024 x 768 60.0 75.0 VESA XGA (75Hz)
1024 x 768 68.7 85.0 VESA XGA (85Hz)
1152 x 864 67.5 75.0 VESA
1152 x 864 (75Hz)
1280 x 768 47.7 60.0 VESA W-XGA (60Hz)
1280 x 800 49.7 60.0 VESA
1280 x 800 (60Hz)
1280 x 960 60.0 60.0 VESA1280 x 960 (60Hz)
1280 x 1024 64.0 60.0 VESA SXGA (60Hz)
1280 x 1024 80.0 75.0 VESA SXGA (75Hz)
*  1280 x 1024 91.1 85.0 VESA SXGA (85Hz)
1400 x 1050 65.2 60.0 VESA SXGA+ (60Hz)
1440 x 900 55.9 59.9 VESA WXGA+ (60Hz)
*  1600 x 1200 75.0 60.0 VESA UXGA (60Hz)
* Supported except for HDMITM input.
Example of computer signal
NOTE  • Be sure to check jack type, signal level, timing and resolution before 
connecting this projector to a computer.
• 
Some computers with multiple display screen modes may unavailable with this projector.• Depending on the input signal, full-size display may unavailabel in some cases. Refer 
to the number of display pixels above.
• Although the projector can display signals with resolution up to UXGA (1600x1200), 
the signal will be converted to the projector’s panel resolution before being displayed. 
The best display performance will be achieved if the resolutions of the input signal and 
projector panel are identical.
• Automatic adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a composite 
sync or a sync on G. 
						

							2LX501/LX601i User Manual-Technical Guide 020-000503-01 Rev. 1 (03-2012)
Initial set signals
 Back porch (B)  Front porch (D)  Back porch (b)  Front porch (d)
 
Active video (C) 
Data Data
H. Sync.  V. Sync.
Sync (A)   Sync (a)Active video (c) 
Resolution 
(H x V)Horizontal signal timing (μs) Vertical signal timing (lines)
Signal mode
(A) (B) (C) (D) (a) (b) (c) (d)
720 x 4002.0 3.0 20.3 1.0 3 42 400 1 TEXT
640 x 480 3.8 1.9 25.4 0.6 2 33 480 10 VGA (60Hz)
640 x 480 1.3 4.1 20.3 0.8 3 28 480 9 VGA (72Hz)
640 x 480 2.0 3.8 20.3 0.5 3 16 480 1 VGA (75Hz)
640 x 480 1.6 2.2 17.8 1.6 3 25 480 1 VGA (85Hz)
800 x 600 2.0 3.6 22.2 0.7 2 22 600 1 SVGA (56Hz)
800 x 600 3.2 2.2 20.0 1.0 4 23 600 1 SVGA (60Hz)
800 x 600 2.4 1.3 16.0 1.1 6 23 600 37 SVGA (72Hz)
800 x 600 1.6 3.2 16.2 0.3 3 21 600 1 SVGA (75Hz)
800 x 600 1.1 2.7 14.2 0.6 3 27 600 1 SVGA (85Hz)
832 x 624 1.1 3.9 14.5 0.6 3 39 624 1 Mac 16" mode
1024 x 768 2.1 2.5 15.8 0.4 6 29 768 3 XGA (60Hz)
1024 x 768 1.8 1.9 13.7 0.3 6 29 768 3 XGA (70Hz)
1024 x 768 1.2 2.2 13.0 0.2 3 28 768 1 XGA (75Hz)
1024 x 768 1.0 2.2 10.8 0.5 3 36 768 1 XGA (85Hz)
1152 x 864 1.2 2.4 10.7 0.6 3 32 864 11152 x 864 
(75Hz)
1280 x 768 1.7 2.5 16.0 0.8 3 23 768 1 W-XGA (60Hz)
1280 x 800 1.6 2.4 15.3 0.8 3 24 800 11280 x 800 
(60Hz)
1280 x 960 1.0 2.9 11.9 0.9 3 36 960 11280 x 960 
(60Hz)
1280 x 1024 1.0 2.3 11.9 0.4 3 38 1024 1 SXGA (60Hz)
1280 x 1024 1.1 1.8 9.5 0.1 3 38 1024 1 SXGA (75Hz)
1280 x 1024 1.0 1.4 8.1 0.4 3 44 1024 1 SXGA (85Hz)
1400 x 1050 1.2 2.0 11.4 0.7 3 33 1050 1 SXGA+ (60Hz)
1440 x 900 1.4 2.2 13.5 0.8 6 25 900 3 WXGA+ (60Hz)
1680 x 1050 1.2 1.9 11.5 0.7 6 30 1050 3 WSXGA+ (60Hz)
1600 x 1200 1.2 1.9 9.9 0.4 3 46 1200 1 UXGA (60Hz)
1920 x 1200 0.208 0.519 12.47 0.312 6 26 1200 3
W-UXGA (60Hz) 
Reduced Blanking
The following signals are used for the initial settings. The signal timing of some 
computer models may be different. In such case, adjust the items V POSITION 
and H POSITION in the IMAGE menu. 
Initial set signals 
						

							3LX501/LX601i User Manual-Technical Guide 020-000503-01 Rev. 1 (03-2012)
ACOMPUTER IN1, BMONITOR OUT
D-sub 15pin mini shrink jack

•  Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive)
• H/V. sync. signal: TTL level (positive/negative)
• Composite sync. signal: TTL level

•  Video signal:  Y with composite sync, Analog, 1.0±0.1Vp-p, 75Ω terminated 
Cb/Pb, Analog, 0.7±0.1Vp-p, 75Ω terminated 
Cr/Pr, Analog, 0.7±0.1Vp-p 75Ω terminated
• System: 480i@60, 480p@60, 576i@50, 720p@50/60, 1080i@50/60
Pin Signal Pin Signal
1 Video Red, Cr/Pr 9 (No connection)
2 Video Green, Y 10 Ground
3 Video Blue, Cb/Pb 11 (No connection)
4 (No connection) 12
A
: SDA (DDC data)  B
: (No connection)
5 Ground 13 H. sync / Composite sync.
6 Ground Red, Ground Cr/Pr 14 V. sync.
7 Ground Green, Ground Y15
A
: SCL (DDC clock)  B
: (No connection)
8 Ground Blue, Ground Cb/Pb
Connection to the ports
ƒ‡† … „ ˆŒ‹ Š ‰   Ž
Connection to the ports
B
A
NOTICE
►Use the cables with straight plugs, not L-shaped ones, as the 
input ports of the projector are recessed.
►Only the signal that is input from the COMPUTER IN1 or IN2 can be output
from the MONITOR OUT port. 
						

							4LX501/LX601i User Manual-Technical Guide 020-000503-01 Rev. 1 (03-2012)
Connection to the ports (continued)
COMPUTER IN2  CG/Y, DB/Cb/Pb,
 ER/Cr/Pr, FH, GV
BNC jack x5

•  Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive)
• H/V. sync. signal: TTL level (positive/negative)
• Composite sync. signal: TTL level

•  Video signal:  Y with composite sync, Analog, 1.0±0.1Vp-p, 75Ω terminated 
Cb/Pb, Analog, 0.7±0.1Vp-p, 75Ω terminated 
Cr/Pr, Analog, 0.7±0.1Vp-p 75Ω terminated
• System: 480i@60, 480p@60, 576i@50, 720p@50/60, 1080i@50/60
HHDMI 1, IHDMI 2
HDMITM connector
• Audio signal: Linear PCM (Sampling rate; 32/44.1/48 kHz)
Pin Signal Pin Signal Pin Signal
1 T.M.D.S. Data2 + 8 T.M.D.S. Data0 Shield 15 SCL
2 T.M.D.S. Data2 Shield 9 T.M.D.S. Data0 - 16 SDA
3 T.M.D.S. Data2 - 10 T.M.D.S. Clock + 17 DDC/CEC Ground
4
T.M.D.S. Data1 + 11 T.M.D.S. Clock Shield18+5V Power
5 T.M.D.S. Data1 Shield 12 T.M.D.S. Clock -19 Hot Plug Detect
6 T.M.D.S. Data1 - 13 CEC
7 T.M.D.S. Data0 + 14 Reserved (N.C. on device)
ƒ‡†
… „ˆŒ
‹ Š

 Ž
• ”
“ ’
CED
F
FG
HI 
						

							5LX501/LX601i User Manual-Technical Guide 020-000503-01 Rev. 1 (03-2012)
MS-VIDEO
Mini DIN 4pin jack
•  S-video signal, Analog: 
-Brightness signal with composite sync, 1.0±0.1Vp-p, 75Ω terminated 
-Color signal,   0.286Vp-p (NTSC, burst), 75Ω terminated 
0.300Vp-p (PAL/SECAM, burst) 75Ω terminated
• System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL(60Hz)
Pin Signal
1 C (color signal) 
2 Y (brightness signal)
3 Ground
4 Ground
Connection to the ports (continued)
NVIDEO
RCA jack
• Composite video signal, Analog, 1.0±0.1Vp-p, 75Ω terminator
• System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL(60Hz)
COMPONENT  JY,  KCb/Pb, LCr/Pr
RCA jack x3
•  Component video signal, Analog: 
-Y with composite sync, 1.0±0.1Vp-p, 75Ω terminated 
-Cb/Pb, 0.7±0.1Vp-p, 75Ω terminated 
-Cr/Pr, 0.7±0.1Vp-p 75Ω terminated
• System: 480i@60, 480p@60, 576i@50, 720p@50/60, 1080i@50/60, 1080p@50/60
LJK
MN
ƒ †…
„1
2
3
4 
						

							6LX501/LX601i User Manual-Technical Guide 020-000503-01 Rev. 1 (03-2012)
Connection to the ports (continued)
OAUDIO IN1, PAUDIO IN2
Ø3.5 stereo mini jack
• 
Analog, 500 mVrms, 47kΩ input impedance
AUDIO IN3  QL, RR  AUDIO OUT  SL, TR
RCA jack x2  RCA jack x2
• 
Analog, 500 mVrms, 47kΩ input impedance • Analog, 500 mVrms, 1kΩ output impedance
UCONTROL
D-sub 9pin plug
*  About the details of RS-232C communication,  
please refer to the next section.
Pin Signal Pin Signal Pin Signal
1 (No connection) 4 (No connection) 7 RTS
2 RD 5 Ground 8 CTS
3 TD 6 (No connection) 9 (No connection)
ƒ „ˆ ‰ Š ‹
‡†…
O
PSTRQU 
						

							7LX501/LX601i User Manual-Technical Guide 020-000503-01 Rev. 1 (03-2012)
REMOTE CONTROL  YIN, ZOUT
Ø3.5 stereo mini jack
Connection to the ports (continued)
XUSB TYPE B
USB B type jack
Pin Signal
1 +5V
2 - Data
3 + Data
4 Ground
VLAN
RJ-45 jack
*  About the details of network communication,  
please refer to the Network Guide.
Pin Signal Pin Signal Pin Signal
1 TX+ 4- 7-
2 TX- 5 -8-
3 RX+ 6 RX-
WUSB TYPE A
USB A type jack x2
Pin Signal
1 +5V
2 - Data
3 + Data
4 Ground
ƒ †…
„
ƒ‡†
… „ˆŠ
‰
ƒ †…„
ƒ †…„
WX
YZ
V 
						

							8LX501/LX601i User Manual-Technical Guide 020-000503-01 Rev. 1 (03-2012)
To input SCART RGB signal;
  ex.
Video
G
B
R
Audio L
Audio R
Connection to the ports (continued)
To input SCART RGB signal to the projector, use a SCART to RCA cable. 
Connect the plugs refer to above ex. For more reference, please consult your 
dealer.
SCART 
connector
(jack)SCART cable
(plug)RCA plugs