Home > Christie > Projector > Christie Projector DHD555-GS User Manual

Christie Projector DHD555-GS User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Christie Projector DHD555-GS User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 476 Christie manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Section 2: INTRODUCTION
    GS Series User Manual020-000724-01 Rev. 1 (05-2014)2-3
    Left View
    Right View
    Ind.Part NameDescription
    1Cooling Air Vents 
    (Intake)Keep these vents unobstructed to prevent the 
    projector from overheating.
    2 LED Status Indicators Displays the status of the projector. They are (from left 
    to right): LIGHT, STATUS, and PIC MUTE.
    3Built-in KeypadControls the projector.
    4 Cooling Air Vents
     
    (Exhaust) Keep these vents unobstructed to prevent the 
    projector from overheating.
    1
    2
    3
    4 
    						
    							Section 2: INTRODUCTION
    GS Series User Manual020-000724-01 Rev. 1 (05-2014)2-4
    2.2 Built-in Keypad
    Ind.Part NameDescription
    1PowerTurn the projector on or off
    2 Menu Display menus
    3EnterConfirm a selection
    4 Auto Automatically optimize image
    5LensAdjust the lens vertical or horizontal offset setting
    6 Focus Adjust focus
    7ExitReturn to previous level or exit menus if at top level
    8 Arrow Keys • Adjust a setting UP or DOWN • Navigate within a menu
    9InputSelect an input for the main or PIP/PBP image
    10 Picture Mute Display or blank the video image.
    11ZoomAdjust zoom
    7
    9
    8
    10
    11
    1
    2
    3
    5
    6
    4 
    						
    							Section 2: INTRODUCTION
    GS Series User Manual020-000724-01 Rev. 1 (05-2014)2-5
    2.3 Input/Output (I/O) Panel
     
     
    Ind.Connector NameInd.Connector Name
    1HDBaseT9Component IN
    2 Remote IN 10 RS232
    3Remote OUT11Mini USB
    4 HDMI 12 USB Type A
    5VGA-IN13Ethernet
    6 VGA OUT 14 CVBS
    7Display Port15S-Video
    8DVI
    HDBaseT REMOTE IN
    GREEN/Y BLUE/PB RED/PR RS232 USB MINI USB
    ETHERNET CVBS S-VIDEO
    REMOTE
    OUT HDMI VGA IN VGA OUT DISPLAY PORT DVI
    1
    92345678
    101213141511 
    						
    							Section 2: INTRODUCTION
    GS Series User Manual020-000724-01 Rev. 1 (05-2014)2-6
    2.4 Remote Control
     
    16
    17
    18
    19
    20
    21
    22
    24
    25
    26
    27
    28
    29
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    23 
    						
    							Section 2: INTRODUCTION
    GS Series User Manual020-000724-01 Rev. 1 (05-2014)2-7
    Ind.Part NameDescription
    1Picture MuteDisplay or blank the video image.
    2 Power on Turn projector ON.
    3GammaAdjust mid-range levels.
    4 Bright Adjust amount of light in the image.
    5PIP/PBPTurn PIP/PBP ON/OFF.
    6 Size Adjust the PIP/PBP size
    7Number KeysEnter a number, such as a channel, value, etc.
    8 Help Display cont ext-sensitive help.
    9MenuDisplay menus.
    10 Arrow Keys • Adjust a setting UP or DOWN.
    • Navigate within a menu.
    11Te s tDisplay a test pattern.
    12 Auto Automatically optimize image.
    13OSDUse to hide or show menus.
    14 Keystone H Adjust the horizontal keystone.
    15Keystone VAdjust the vertical keystone.
    16 Standby Turn projector OFF.
    17ContrastAdjust difference between dark and light.
    18 Hot-key Select your  preset keys quickly.
    19SwapSwap the main and PIP/PBP images.
    20 Layout Adjust the PIP/PBP layout.
    21FocusAdjust focus to improve image clarity as desired.
    22 Zoom Adjust zoom to achieve a desired image size.
    23Proj Key
    Change the remote ID. Press Proj Key then a number 
    between 1 and 9 to assign an ID. Press PROJ then 
    number 0 to return to the universal remote ID.
    24 Exit Return to previous level or exit menus if at top level.
    25Enter• Select a highlighted menu item.
    • Change or accept a value.
    26 Input Select an input for the main or PIP/PBP image.
    27InfoDisplay source image information.
    28 Lens H Horizontal Lens Shift - Adjust the position of the image 
    horizontally.
    29Lens VVertical Lens Shift - Adjust the position of the image 
    vertically. 
    						
    							Section 2: INTRODUCTION
    GS Series User Manual020-000724-01 Rev. 1 (05-2014)2-8
    2.5 LED Status Indicators
    The LED status indicators are located on the right side of the projector. Each
    LED is defined below.
    • LIGHT LED
    • STATUS LED
    LED StatusProjector State
    Red (flashing)When projector has lost ov er 60% initial luminance
    Orange (solid) Laser diode time has expired
    Green (solid)Laser diode is on and operating correctly
    Off Laser diode is off
    LED StatusProjector State
    OffAC power is off (without AC plug in)
    Off, but keypad LED 
    is on AC has been applied, projector is in standby mode
    Green (solid)Projector is powered up and operating normally
    Green (flashing) Projector communications
    Orange (solid)Non-portrait mode used 
    NOTE: Please refer to section 3.5.
    Orange (flashing) Projector is in cool down mode or startup mode
    Green (flashing) / 
    Red (flashing)Projector is in flash (LAN) update state
    Red (solid) Over-temperature
    Red (flashing)Fan failure 
    						
    							Section 2: INTRODUCTION
    GS Series User Manual020-000724-01 Rev. 1 (05-2014)2-9
    •  PICTURE MUTE LED
    LED StatusProjector State
    Green (solid)Light is on - image is displayed
    Orange (solid) Light is on - image is blank 
    						
    							Section 2: INTRODUCTION
    GS Series User Manual020-000724-01 Rev. 1 (05-2014)2-10 
    						
    							Section 3: INSTALLATION
    GS Series User Manual020-000724-01 Rev. 1 (05-2014)3-1
    3. INSTALLATION
    3.1 Connect to Computer
    NOTE:The diagram shows the cables/connectors that may be used to connect to various devices.
     Due to the difference in applications for each country, the accessories required in some regions may be different from those 
    shown.
     This diagram is for illustrative purposes only, and does NOT indicate that these accessories are supplied with the projector.
    Ind.Connector NameInd.Connector NameInd.Connector Name
    1RS232 Cable4USB Type B Mini7Cable
    2 HDMI Cable 5 VGA out Cable 8 DVI Cable
    3VGA in Cable6USB Type A Cable9Power Cord
    HDBaseT REMOTE
    IN
    GREEN/Y BLUE/PB RED/PR RS232 USB MINI USB
    ETHERNET CVBS S-VIDEO
    REMOTE
    OUT HDMI VGA IN VGA OUT DISPLAY PORT DVI
    Desktop
    Laptop
    12345678
    9 
    						
    							Section 3: INSTALLATION
    GS Series User Manual020-000724-01 Rev. 1 (05-2014)3-2
    3.2 Connect to Video Equipment
    NOTE:The diagram shows the cables/connectors that may be used to connect to various devices.
     Due to the difference in applications for each country, the accessories required in some regions may be different from those 
    shown.
     This diagram is for illustrative purposes on ly, and does NOT indicate that these accessories are supplied with the projector.
    Ind.Connector NameInd.Connector NameInd.Connector Name
    1Component 
    (YPbPr) Cable4VGA in Cable7CVBS Cable
    2 HDMI Cable 5 3 RCA Component 
    Cable
    8 S-Video Cable
    3VGA to RBG 
    SCART6
    15-pin to 3 RCA
    Component/HDTV 
    Adapter
    HDBaseT REMOTEIN
    GREEN/Y BLUE/PB RED/PR RS232 USB MINI USB
    ETHERNET CVBS S-VIDEO
    REMOTE
    OUT HDMI VGA IN VGA OUT DISPLAY PORT DVI
    Component video output equipment
    DVD player
    12
    3
    4
    5
    6
    78
    Video cassette recorder 
    						
    All Christie manuals Comments (0)

    Related Manuals for Christie Projector DHD555-GS User Manual