Christie Projector DHD400S User Manual

							Section 6: APPENDICES
61CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015)
Operation conditions 
This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions:This device may not cause harmful interference and
1
. 
This device must accept any interference received, including 
2. 
interference that may cause undesired operation. 
Notice: Canadian users 
This Class B digital apparatus complies with Canadian ICES-003. 
Remarque à l’intention des utilisateurs canadiens 
Cet	appareil	numerique	de	la	classe	B	est	conforme	a	la	norme	NMB-
003 du Canada. 
Declaration of Conformity for EU countries 
Directive 2004/108/EC (including amendments) 
• 
Low Voltage Directive 2006/95/EC 
• 
R & TTE Directive 1999/5/EC (if product has RF function)
• 
Disposal instructions
Do not throw this electronic device into the 
trash when discarding. To minimize pollution 
and ensure utmost protection of the global 
environment, please recycle it. 
						

							62
Section 6: APPENDICES
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015)
Safety Notice
WARNING
This projector is a Class 2 laser device that conforms with IEC  -60825-1:2007 and CFR 1040.10 and 1040.11.
Class 2 laser product, Do Not Stare Into Beam.
 -
This projector has built-in Class 4 laser module. Disassembly or 
 -modification is very dangerous and should never be attempted.
Any operation or adjustment not specifically instructed by the user �s  -
guide creates the risk of hazardous laser radiation exposure.
Do not open or disassemble the projector as this may cause dam -
 -
age by the exposure of laser radiation.
Do not stare into beam when the projector is on. The bright light 
 -may result in permanent eye damage.
Without following the control, adjustment or operation procedure 
 -may cause damage by the exposure of laser radiation.
Adequate	instructions	for	assembly,	operation,	and	maintenance,	 -including clear warnings concerning precautions to avoid possible 
exposure to laser and collateral radiation in excess of the acces -
sible emission limits in Class 2. 
						

							Section 6: APPENDICES
63CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015)
Ceiling Mount Installation6.5 
To prevent damage to your projector, please use ceiling mount (140-1201\
04-01).
1. 
If you want to use a third-party ceiling mount kit, ensure the screws us\
ed to attach a 
2. mount	to	the	projector	meet	the	following	specifications:
Screw type: M4*4 y
Minimum screw length: 10mm
 y
NOTE:Damage resulting from incorrect installation will void the warranty. ™
WARNING
If you buy a ceiling mount from another company, be sure to use the corr\
ect screw size. Screw size will • vary depending on the thickness of the mounting plate.
Be sure to keep at least 10 cm gap between the ceiling and the bottom of\
 the projector.
• Avoid installing the projector near a heat source.
•