Christie Projector DHD400S User Manual

							Section 3: iNSTallaTioN
21
DUW350S
Diagonal length (inch) size of 16:9 Screen Screen Size W x H
Projection Distance (D)
Offset (Hd)
(mm) (inch) (mm)(inch)
Width Height WidthHeight widetelewide tele(mm) (inch)
120 285.4 107.0  112.4  42.1 46.7  NA18.4  NA36.9  14.5 
125 297.3 111.5 117.0  43.9 49.7  NA19.6  NA38.2  15.0 
130 309.2 115.9 121.7  45.6 52.6  NA20.7  NA39.5  15.6 
135 321.1 120.4 126.4  47.4 55.6  NA21.9  NA40.8  16.1 
140 333.0 124.9 131.1  49.2 58.6  NA23.1  NA42.0  16.5 
NOTE: This table is for user’s reference only.
 ™
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015) 
						

							Section 4: USeR CoNTRolS
22
USER CONTROLS4. 
Control Panel & Remote Control4.1 
Control Panel4.1.1 
Using the Control Panel
POWERRefer to the “Power On/Off the Projector” section on 
pages 16- 17.
Enter  Press Enter to 
confirm	your	item	selection.
INPUTPress INPUT to select an input signal.
MENU Press MENU to launch the on-screen display (OSD) 
menu. To exit OSD, press MENU again.
Four Directional Select 
Keys Use 
    to select items or make adjustments 
to your selection.
LAMP LED Refer to the LED indicator of the projector light 
source status.
TEMP LED Refer to the LED indicator of the projector 
temperature status.
ON/STANDBY LED Refer to the LED indicator of the projector power 
status.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015)      
						

							Section 4: USeR CoNTRolS
23
Remote Control4.1.2 
Using the Remote Control
Infrared 
transmitterSends signals to the projector.
LED LED Indicator.
Power  
Refer to the “Power On/Off the 
Projector” section on pages  16-17.
Exit Press “Exit” to close the OSD menu.
Zoom in Zoom in the projector display.
Reset Return the adjustments and settings to 
the factory default values (except for 
lamp counter).
Zoom out Zoom out the projector display.
Enter
Confirm	your	item	selection.
Input Press “Input” to select an input signal.
Auto Automatically synchronizes the 
projector to the input source.
Four Directional 
Select Keys Use 
    to select items or make 
adjustments to your selection.
Keystone +/- Adjust image distortion caused by tilting 
the projector.
Volume +/- Adjust to increase/decrease the 
volume.
Aspect ratio Use this function to choose your re
-
quired	aspect	ratio.
MenuPress “Menu” to launch the on-screen 
display (OSD) menu. To exit OSD, 
press “Menu” again.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015)     
						

							Section 4: USeR CoNTRolS
24
Using the Remote Control
VGA1Press “VGA1” to choose VGA IN 1 
connector.
Black screen Momentarily turns off/on the audio and 
video.
HDMI1  Press “HDMI1” to choose HDMI IN 1 
connector.
HDMI2 Press “HDMI2” to choose HDMI IN 2 
connector.
VGA2 Press “VGA2” to choose VGA IN 2 
connector.
Video Press “Video” to choose Composite 
video source.
Screen freeze Pause the screen image. Press again 
to resume the screen image.
Image Select the display mode from Bright, 
PC, Movie, Game, and User.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015) 
						

							Section 4: USeR CoNTRolS
25
imagePC
White
Color Mode
Wall Color
Brightness
Contrast
Sharpness
Saturation
Hue
Gamma
Back
Enter
Select
On-screen Display Menus4.2 
The Projector has multilingual On-screen Display menus that 
you can use to make image adjustments and change a variety 
of settings.
How to operate4.2.1 
To open the OSD menu, press “Menu” on the Remote Control or 
1. 
Projector Keypad.
When OSD is displayed, use the 
2
.   keys to select any item in the 
main menu. While making a selection on a particular page, press the 
 or “Enter” key to enter sub menu.
Use the 
3.   keys to select the desired item and adjust the settings 
using the   key.
Select the next item to be adjusted in the sub menu and adjust as 
4. 
described above.
Press	“Enter”	to	confirm,	and	the	screen	will	return	to	the	main	menu.5. 
To exit, press “Menu” again. The OSD menu will close and the 
6. 
projector will automatically save the new settings.
Main Menu
Settings
Sub Menu
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015)        
						

							Section 4: USeR CoNTRolS
26
Image4.2.2 
imagePCWhite
Color Mode
Wall Color
Brightness
Contrast
Sharpness
Saturation
Hue
Gamma
Back
Enter
Select
Color Mode
There are many factory presets optimized for various types of images. Us\
e 
the	◄	or	►	button	to	select	the	item.
Bright: For brightness optimization.
•	
PC: For meeting presentation.
•	
Movie: For playing video content.
•	
Game: For game content.
•	
User: Memorize user �s settings.•	
Wall Color
Use this function to obtain an optimized screen image according to the w\
all 
color. You can select from “White”, “Light Yellow”, “Light Blue”, “Pink”, and 
“Dark Green”.
Brightness
Adjust the brightness of the image.
Press	the	◄	button	to	darken	image.•	
Press	the	►	button	to	darken	image.•	
Contrast
The Contrast controls the difference between the lightest and darkest parts of 
the picture. Adjusting the contrast changes the amount of black and white in 
the image.
Press	the	◄	button	to	decrease	the	contrast.•	
Press	the	►	button	to	increase	the	contrast.•	
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015) 
						

							Section 4: USeR CoNTRolS
27
Sharpness
Adjust the sharpness of the image.
Press	the	◄	button	to	decrease	the	sharpness.•	
Press	the	►	button	to	increase	the	sharpness.•	
Saturation
Adjust a video image from black and white to fully saturated color.
Press	the	◄	button	to	decrease	the	amount	of	saturation	in	the	image.•	
Press	the	►	button	to	increase	the	amount	of	saturation	in	the	image.•	
Hue
Adjust the color balance of red and green.
Press	the	◄	button	to	increase	the	amount	of	green	in	the	image.•	
Press	the	►	button	to	increase	the	amount	of	red	in	the	image.•	
Gamma
This allows you to adjust the gamma value to obtain the better image con\
trast 
for the input.
NOTE:Sharpness, Saturation and Hue functions are only supported under video m\
ode. ™
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015) 
						

							Section 4: USeR CoNTRolS
28
Configuration4.2.3 
ConfigurationAspect RatioAuto
Phase
Clock
H. Position
V. Position
Digital Zoom
V. Keystone
Orientation Front Ceiling
Back
Enter
Select
Aspect Ratio
Auto: Keep the image with original width-height ratio and maximize the 
•	
image to fit native horizontal or vertical pixels.
4:3: The image will be scaled to fit the screen and displayed using a 4:3 
•	
ratio.
16:9: The image will be scaled to fit the width of the screen and the height 
•	
adjusted to display the image using a 16:9 ratio.
16:10: The image will be scaled to fit the width of the screen and the height 
•	
adjusted to display the image using a 16:10 ratio. (only for DHD400S).\
UWHD: The image will be scaled to fit the width of the screen and the 
•	
height adjusted to display the image using a 16:6 ratio (only for DUW350S).
Phase
Synchronize the signal timing of the display with the graphic card. If t\
he image 
appears	unstable	or	flickers,	use	this	function	to	correct	it.
Clock
Adjust	to	achieve	an	optimal	image	when	there	is	a	vertical	flicker	in	the	
image.
H. Position
Press	the	◄	button	to	move	the	image	left.•	
Press	the	►	button	to	move	the	image	right.•	
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015) 
						

							Section 4: USeR CoNTRolS
29
V. Position
Press	the	◄	button	to	move	the	image	down.•	
Press	the	►	button	to	move	the	image	up.•	
Digital Zoom
Press	the	◄	button	to	reduce	the	size	of	an	image.•	
Press	the	►	button	to	magnify	an	image	on	the	projection	screen.•	
V. Keystone
Press	the	◄	or	►	button	to	adjust	image	distortion	vertically.	If	the	image	
looks trapezoidal, this option can help make the image rectangular.
Orientation
Front: The image is projected straight on the screen.
•	
Front Ceiling: This is the default selection. When selected, the image will 
•	
turn upside down.
Rear: When selected, the image will appear reversed.
•	
Rear Ceiling: When selected, the image will appear reversed in upside 
•	
down position.
NOTE: H. Position and V. Position ranges will depend on input source. ™
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015) 
						

							Section 4: USeR CoNTRolS
30
Settings4.2.4 
SettingsEnglish
Off
Off
Off
Off Input
Language
OSD Position
Closed Caption
VGA Output (Standby)
LAN (Standby)
VGA-2 (Function)
Test Pattern
Factory Reset
Back
Enter
Select
Language
Choose	the	multilingual	OSD	menu.	Press	the	◄	or	►	button	into	the	sub	
menu	and	then	use	the	▲	or	▼	button	to	select	your	preferred	language.	
Press	►	on	the	remote	control	to	finalize	the	selection.
Language
Back
Enter
Select
OSD Position
Choose the menu location on the display screen.
Closed Caption
Use this function to enable close caption menu. Select an appropriate cl\
osed 
captions option: Off, CC1, CC2, CC3, and CC4.
VGA Output (Standby)
Choose “On” to enable VGA OUT connection.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015)