Christie Digital Systems Ds+60 Users Manual

Appendix D: Throw Distance 
 
   Christie DS+60 User’s Manual     D-7  
 
 
 
  

Appendix E 
System Integration 
 
   Christie DS+60 User’s Manual     E-1 
The GPIO connector located on the input panel provides a flexible method of interfacing a wide range 
of external I/O devices to the projector. There are 7 GIO pins available on the 9pin D-Sub GPIO 
connector, which are configurable via RS232 commands. The other two pins are reserved for ground 
and power – see table below for pin identification. 
 
GPIO Pins 
Pin #  Signal 
1  + 12V (200mA) 
2 GPIO 1 
3 GPIO 2 
4 GPIO 3 
5 Ground...

Appendix E: System Integration 
E-2     Christie DS+60 User’s Manual      
Query Command 
(GIO?)  Request the state and configuration of all pins 
(GIO! “HHLLHLH” “OOIOOOI”)   Reply of pin state and configuration 
(GIO? C2)  Request configuration for pin #2 
(GIO! C2 O)  Reply with pin #2 configuration as output 
(GIO? 2)  Request the state of pin #2 
(GIO! H)  Reply with pin #2 state as high 
 
Real Time Event 
Use the serial command RTE to specify an action that is initiated at a particular time or...

Appendix F 
Optional Input Modules 
 
   Christie DS+60 User’s Manual     F-1 
There are many optional input modules and accessories currently available for this 
projector. Contact your dealer for a complete and up-to-date listing. 
NOTE: Always unplug the projector or switcher before installing or removing any optional 
input module. 
 
The RGB500 Input Module may be installed in this projector, a Marquee Signal 
Switcher, or a Marquee Case/Power Supply. The module receives analog RGB input 
signals...

Appendix F: Optional Input Modules 
F-2     Christie DS+60 User’s Manual      
The RGB400 ALT Input Module may be installed in this projector, a Marquee Signal 
Switcher, or a Marquee Case/Power Supply. The module receives analog RGB input 
signals from computers or other RGB source devices. Video inputs are 
75Ω
 terminated. Video outputs provide buffered loop-through to another display 
device. 
 
RGB400ALT Features 
◊ accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or 
separate...

Appendix F: Optional Input Modules 
 
   Christie DS+60 User’s Manual     F-3  
 
This module can display digital video input signals conforming to the DVI (Digital 
Visual Interface) single-channel standard. 
 
Features 
◊ supports Digital Visual Interface (DVI) single-channel  
◊ supports VESA Extended Display Identification Data (EDID)  
◊ provides an active-loop-through using a DVI connector (conforming to 
the DVI Specification) 
 
 
This module accepts a serial digital 4:2:2 component video...

Appendix G 
300W P-VIP Product 
Safety Data Sheet 
 
   Christie DS+60 User’s Manual     G-1 
  

Appendix G: 300W P-VIP Product Safety Data Sheets 
 G-2 Christie DS+60 User’s Manual