Home
>
Christie Digital Systems
>
Projector
>
Christie Digital Systems Ds+5k, Kc-8k, Dw3k-6k, Kc, Hd5k, Kc-8k, Kc, Mirage S+2-4-8k, Dlv1400-dx, 1920-dx, Matrix S+2k, 4000, Hd4k Users Manual
Christie Digital Systems Ds+5k, Kc-8k, Dw3k-6k, Kc, Hd5k, Kc-8k, Kc, Mirage S+2-4-8k, Dlv1400-dx, 1920-dx, Matrix S+2k, 4000, Hd4k Users Manual
Have a look at the manual Christie Digital Systems Ds+5k, Kc-8k, Dw3k-6k, Kc, Hd5k, Kc-8k, Kc, Mirage S+2-4-8k, Dlv1400-dx, 1920-dx, Matrix S+2k, 4000, Hd4k Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 267 Christie Digital Systems manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Appendix B Keypad Reference 013-100199-04 B-1 NOTE: The IR remote is a standard component provided with the projector. Use the extension cable also provided to convert the IR remote to a wired remote, if desired. Refer to Section 3 for a specific description of each key and how to use them correctly. * Toggle keys, which require you to either, press and hold, or press twice or press and use the up/down arrow key.
Appendix C Serial Communication Cables 013-100199-04 C-1 A serial link of RS232 or RS422 enables ASCII communication with the projector so that it can be controlled remotely from a PC or other controller. From a PC, connect a standard nine-wire RS232 serial cable to the RS232 IN port. Or, for long-distance (>100 ft.) links with an RS422-compatible PC or controller, connect RS422 cable to the RS422 port.
Appendix D Throw Distance 013-100199-04 D-1 Calculating Throw Distance It is important throw distance be precisely calculated for your installation using the appropriate formula from the chart below. To calculate throw distance you must know the screen size and the lens type installed in the projector. In general, the larger you want the image to be the greater the distance you must allow between the lens and the screen. NOTES: 1) Throw distance is measured from the screen to the center of the projector’s front feet. 2) This measurement is not necessarily parallel to the floor as the projector and screen may be inclined. 3) Due to lens manufacturing, throw distance calculations have a tolerance of ± 5%. Table A-1 Throw Distance Formulas Screen Diagonal Inches (cm) Screen Width Inches (cm) Lens Throw Ratio Throw Distance Formula Inches (cm) Min. Max. Min. Max. 0.73 SX+ 0.762 x screen width + 2.65 (6.73) 73.75 (187.3) 215 (543.1) 59.1 (150) 172 (437) 1.2:1 (short throw) SX+ 1.2865 x screen width + 3.94 (10.01) 59 (149.86) 147.5 (374.65) 47.2 (120) 118 (300) 1.2:1 (long throw) SX+ 1.2521 x screen width + 4.259 (10.818) 147.5 (374.65) 737.5 (1873.25) 118 (300) 590 (1499) 1.45-1.8 SX+ Min. 1.4789 x screen width – 1.42 (3.607) Max. 1.8655 x screen width – 3.23 (8.204) 78.75 (199.39) 62.5 (158.75) 542.5 (1377.95) 437.5 (1111.25) 63 (160) 50 (127) 434 (1103) 350 (889) 1.8-2.5 SX+ Min. 2.0424 x screen width – 29.19 (74.143) Max. 2.6076 x screen width – 6.55 (16.637) 78.75 (200.02) 57.5 (146.05) 546.25 (1387.5) 393.75 (1000.1) 63(161) 46 (116) 437 (1111) 315 (800) 2.5-4.5 SX+ Min. 2.6347 x screen width – 4.50 (11.43) Max. 4.783 x screen width – 11.65 (29.591) 120 (304.8) 67.5 (171.45) 550 (1397) 546.25 (1387.5) 96 (244) 54 (136) 440 (1120) 437 (1111) 4.5-7.3 SX+ Min. 4.5126 x screen width – 2.58 (6.553) Max. 7.423 x screen width – 9.92 (25.197) 131.25 (333.38) 81.25 (206.38) 546.25 (1387.5) 538.75 (1368.4) 105 (267) 65 (164) 437 (1111) 431 (1096) 0.67 HD 0.7058 x screen width + 2.23 (5.664) 73.75 (187.3) 215 (543.1) 59 (150) 172 (438) 1.1:1 FP HD 1.194 x screen width + 2.67 (6.782) 59 (149.86) 147.5 (374.65) 47.2 (120) 118 (300) 1.1:1 RP HD 1.1447 x screen width + 3.76 (9.550) 147.5 (374.65) 737.5 (1873.25) 118 (300) 590 (1500) 1.38 – 1.84 HD Min. 1.3834 x screen width + 1.79 (4.547) Max. 1.8835 x screen width + 1.44 (3.658) 78.75 (199.39) 62.5 (158.75) 542.5 (1377.95) 437.5 (1111.25) 63 (159) 50 (127) 434 (1103) 350 (889) 1.84 – 2.58 HD Min. 1.8971 x screen width – 3.95 (10.033) Max. 2.5974 x screen width – 3.64 (9.246) 78.75 (200.02) 57.5 (146.05) 546.25 (1387.5) 393.75 (1000.1) 63 (161) 46 (116) 437 (1111) 315 (800) 2.58 – 4.15 HD Min. 2.4591 x screen width +11.33 (28.778) Max. 4.112 x screen width + 9.0389 (22.962) 120 (304.8) 67.5 (171.45) 550 (1397) 546.25 (1387.5) 96 (244) 54 (136) 440 (1120) 437 (1111) 4.15 – 6.74 HD Min. 4.0813 x screen width + 10.664 (27.0256) Max. 6.8869 x screen width + 10.695 (27.178) 131.25 (333.38) 81.25 (206.38) 546.25 (1387.5) 538.75 (1368.4) 105 (267) 65 (164) 437 (1111) 431 (1096) NOTES: Calculations are not shown for 1.2:1 lenses. TD = projector distance from the screen to the center of the projector’s front feet W = screen (image) width.
Appendix D: Throw Distance D-2 013-100199-04 SXGA+ Lenses f