Christie Christi Eprojector Mirage S+22k J Technical Manual

J Series Serial Commands Technical Reference Information71 of 90020-100796-01 Rev. 1 (10-2011)
(RBL) RIGHT BLANKING 
CONTROL GROUP: Input     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Set the number of lines to blank (turn to black) at the right of the image. This can be used to blank out any 
unwanted data near the right edge of the image. 
A positive amount of blanking makes the image smaller. A negative amount of blanking makes the image larger. 
Negative blanking is only...

72 of 90J Series Serial Commands Technical Reference Information020-100796-01 Rev. 1 (10-2011)
(PLK) PIP User Lockouts con’t
EXAMPLES:
(RDB 128) - Set red black level to 128 on main video. 
(RDB+MAIN 128) - Set red black level to 128 on main video. 
(RDB+PIIP 100) - Set red black level to 100 on PIP video. 
(RDB+IN32 100) - Set red black level to 100 on slot 3 input 2. 
(RDB?) - Returns the current red black level value on main video. 
(RDB+PIIP ?) - Returns the current red black level value on PIP...

J Series Serial Commands Technical Reference Information73 of 90020-100796-01 Rev. 1 (10-2011)
(ROG) Red Odd Pixel Gain con’t
EXAMPLE:
(ROG+SL10 -10) - Set a red gain offset to -10 on slot 1. 
(ROO) RED ODD PIXEL OFFSET 
CONTROL GROUP: Option     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Adds an offset to input red blacklevel settings on the analog input card. It is used to compensate for differences 
between the A to D converter used to sample even pixels, and the one used for odd...

74 of 90J Series Serial Commands Technical Reference Information020-100796-01 Rev. 1 (10-2011)
(RTE) Real Time Events con’t
Single Occurrence Events:
(RTE T YYYY/MM/DD HH:MM:SS S description command)
Daily Occurring Event:
(RTE T YYYY/MM/DD HH:MM:SS YYYY/MM/DD D R description command)
where the first date and time is the start date and occurrence time
the second date is the end date
R is the Repeat Every interval i.e. repeat every R days 
Weekly Occurring Event:
(RTE T YYYY/MM/DD HH:MM:SS YYYY/MM/DD W R...

J Series Serial Commands Technical Reference Information75 of 90020-100796-01 Rev. 1 (10-2011)
cont.
System Events:
(RTE S E T description command)
where E is the event to respond to:
0 = Boot Up
1 = Power On/Off
T = 0 (Either a Power On or Off event)
T = 1 (Power On only)
T = 2 (Power Off only)
2 = Any System Error
3 = Good Signal
4 = No Signal
5 = Input Change
6 = Channel Change
T = channel (where channel is 1-99)
GPIO Events:
(RTE G AAAAAAA description command)
where A is GPIO input for each pin:
= X...

76 of 90J Series Serial Commands Technical Reference Information020-100796-01 Rev. 1 (10-2011)
(RTE) Real Time Events con’t
cont.
Weekly Occurring Event:
(RTE T 2009/01/01 23:00:00 2009/03/01 W 1 SSu description (PWR 0)) - power off the projector every 
week, on Saturday and Sunday at 23:00:00, starting from January 1, 2009 until March 1, 2009 (inclusive) 
(RTE T 2009/01/01 23:00:00 2009/03/01 W 2 MTWThF description (PWR 1)) - power on the projector 
every other week, on every weekday at 23:00:00,...

J Series Serial Commands Technical Reference Information77 of 90020-100796-01 Rev. 1 (10-2011)
(SHU) SHUTTER 
CONTROL GROUP: Unsaved     SUBCLASS: Power Down           ACCESS LEVEL: Operator
DESCRIPTION
This control opens or closes the mechanical shutter that completely blocks all light to the screen. Valid values are: 
0 = Open 
1 = Close   
SUBCODE

DESCRIPTION OF USE
Open or close the shutter. 
EXAMPLES:
(SHU 1) - Close the shutter. 
(SHU?) - Get the shutter position. 
(SIN) SELECT INPUT 
CONTROL...

78 of 90J Series Serial Commands Technical Reference Information020-100796-01 Rev. 1 (10-2011)
(SIZ) Size con’t
EXAMPLES:
(SIZ 500) - Set size to 500 on main video. 
(SIZ?) - Returns the size value on main video. 
(SMP) SAMPLING MODE 
CONTROL GROUP: Input     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
This control sets the color sampling mode for a digital signal to either YCbCr 4:4:4, RGB or YCbCr 4:2:2. 
Although the proper sampling mode is determined automatically by the...

J Series Serial Commands Technical Reference Information79 of 90020-100796-01 Rev. 1 (10-2011)
(SPS) SPLASH SCREEN 
CONTROL GROUP: Preference     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Upload a User Splash Screen (logo) bitmap and configure splash screen display options.   
SUBCODE

DESCRIPTION OF USE
View/Set option indicating when a logo is displayed. Valid values 
are: 
0 = Always off 
1 = Display on Startup only 
2 = Display on Startup and when there is no Signal
BACK...

80 of 90J Series Serial Commands Technical Reference Information020-100796-01 Rev. 1 (10-2011)
(SPT) Split Screen con’t
EXAMPLES:
(SPT 1) - Turn on split screen to the side. 
(SPT 0) - Turn off split screen. 
(SST) SYSTEM STATUS 
CONTROL GROUP: Preference     SUBCLASS: Power Down           ACCESS LEVEL: Status
DESCRIPTION
Retrieve the various system status groups.   
SUBCODE

DESCRIPTION OF USE
Returns information on all status groups, with one message per 
item.
ALRM Returns a summary of any active...