Casio Xj Sc210, Xj Sc215, Xj S32, Xj S37, Xj S42, Xj S47, Xj S52, Xj S57 Data Projector Users Guide

11
Configuring Advanced Projector Settings
Your projector has a setup menu that you can use to configure advanced settings.
Displaying the Setup Menu
Pressing the [MENU] key displays the menu shown below in the center of the projection 
screen.
To exit the setup menu
Press the [MENU] key.
Configuring Setup Menu Settings
1Press the [MENU] key to display the setup menu.
2Use the [T] and [S] keys to select the main menu item you want by 
highlighting it.
3Press the [ENTER] key.
4Use the [T] and [S] keys to...

12
Basic Setup Menu Example
The procedure below shows how to configure the following three settings:
 Image Adjustment 1 J Contrast
 Image Adjustment 1 J Color Mode
 Option Settings 1 J Eco Mode
Note
zCertain settings on the setup menu cannot be changed while there is no input signal 
to the projector. Because of this, you should configure setup menu settings after 
selecting an input source and starting projection.
zThis example covers basic steps only. For more detailed information, see “Setup Menu...

13
To configure the “Image Adjustment 1 J Color Mode” setting
5Press the [T] key once to select “Color Mode”.
6Press the [ENTER] key.
zThis displays the color mode menu.
7Use the [T] and [S] keys to select the color mode you want, and then press 
the [ENTER] key.
8After selecting the color mode you want, press the [ESC] key.
To configure the “Option Settings 1 J Eco Mode” setting
9Press the [ESC] key.
10Press the [T] key five times to select “Option Settings 1”.
11Press the [ENTER] key.
12Press the [T]...

14
The password feature lets you keep unauthorized individuals from using the projector. You 
can specify whether password input is required whenever you turn on the projector, and you 
can specify and change the password as required. Use the setup menu “Option Settings 1 
J Power On Password” setting to configure power on password settings.
Inputting a Password
The password of your projector is not really a “word” made up of letters, but rather a 
sequence of remote controller key inputs. The following...

15
Keep a written record of your password!
You will not be able to use the projector if you forget its password. We strongly suggest 
that you keep a written or other type of record of the password so you can look it up 
when necessary.
To change the password
1Press the [MENU] key to display the setup menu.
2Use the [T] key to select “Option Settings 1”, and then press the [ENTER] key.
3Use the [T] key to select “Power On Password”, and then press the [ENTER] 
key.
zThis will display a dialog box...

16
To turn password protection on and off
1Display the Power On Password setting screen by performing steps 1 through 5 
of the procedure under “To change the password” on page 15.
zAt this time, make sure that “Power On Password” is selected on the Power On 
Password setting screen.
2Use the [W] and [X] keys to select “On” or “Off”.
zChanging the power on password setting from “On” to “Off ” causes the confirmation 
dialog box shown below to appear.
Press the [ENTER] key to confirm that you want to turn...

17
You can use the procedures in this section to restore all of the settings on a particular main 
menu or all of the settings on the setup menu to their initial factory defaults.
To restore all settings on a particular main menu to their initial factory 
defaults
1Press the [MENU] key to display the setup menu.
2Use the [T] and [S] keys to select the main menu whose settings you want to 
restore to their initial factory defaults.
zYou can select Image Adjustment 1, Image Adjustment 2, Volume Adjustment,...

18
To restore all settings on the setup menu to their initial factory defaults
1Press the [MENU] key to display the setup menu.
2Use the [T] key to select “Restore All Defaults”, and then press the [ENTER] 
key.
3Use the [ T] key to select “Restore All Defaults” sub-menu, and then press the 
[ENTER] key.
z This displays a confirmation message asking if you want to initialize all settings.
4Use the [ S] key to select “Yes”.
5To restore all settings on the setup me nu to their initial defaults, press the...

19
Image Adjustment 1 Main Menu
Setting NameInputSetting UnitDescription
Brightness RCVU Source  SpecificUse this sub-menu to adjust the brightness of the 
projected image. A larger value produces a brighter 
image.
Contrast RCVU Source  SpecificUse this sub-menu to adjust the contrast of the projected 
image. A larger value produces a stronger contrast.
Sharpness RCV Source 
Specific Use this sub-menu to adjust the sharpness of the outlines 
in the projected image. A larger value makes the image...

20
Image Adjustment 2 Main Menu
Noise FilterRCV Source 
Specific This setting is valid when VIDEO is selected as the input 
source.
Normal
*:
Select this setting when projecting a movie.
High:
Select this setting when projecting still images. 
In particular, this setting s hould be used when projecting 
still images from a digital camera connected to the 
projector’s VIDEO terminal.
Restore Menu 
Defaults RCVU Source 
Specific Use this sub-menu to return all of the sub-menu items on 
the Image...