Casio Xj Sc210, Xj Sc215, Xj S32, Xj S37, Xj S42, Xj S47, Xj S52, Xj S57 Data Projector Users Guide

DATA PROJECTOR
XJ-SC210/XJ-SC215*
XJ-S32/XJ-S37*
XJ-S42/XJ-S47*
XJ-S52/XJ-S57*
* USB Port Equipped Models
User’s Guide
z Be sure to read the precautions in the 
separate User’s Guide (Basic Operation). For 
details about setting up the projector and lamp 
replacement, see the User’s Guide (Basic 
Operation).
z Be sure to keep all user documentation handy 
for future reference.
E 

2
 DLP is a registered trademark of Texas Instruments of the United States.
 Microsoft, Windows, and Windows Vista are registered trademarks or trademarks of 
Microsoft Corporation in the United States and other countries.
 Other company and product names may be registered product names or trademarks of 
their respective owners.
 The contents of this User’s Guide are subject to change without notice.
 Copying of this manual, either in part or its entirety is forbidden. You are allowed to 
use this...

3
Contents
About this manual... .......................................................................................... 4
USB Port Equipped Model Users ................................................................................. 4
Operation During Projection .......................................... 5
Image Operations During Projection ................................................................. 5
Adjusting Image Brightness...

4
Appendix ........................................................................ 30
Remote Controller Signal Range .................................................................... 30
Projection Distance and Screen Size .............................................................. 31
Aspect Ratio Setting and Projection Image during RGB Input ........................ 32
Supported Signals ........................................................................................... 33
zThis manual...

5
Operation During Projection
This section explains the various types of operations you can perform while the projector is 
projecting an image.
You can perform the following operations while projecting an image.
zImage brightness adjustment
zColor mode selection
zImage zooming
zMomentary cut off of the input source image and projection of a black or blue screen, or 
a logo
zImage freeze
zPointer display in the projected image
zAspect ratio switching
Adjusting Image Brightness
Note
(for USB port equipped...

6
Selecting the Color Mode
You can select from among five different color mode settings to optimize the projected 
image in accordance with image contents and projection conditions.
To change the color mode
1Press the [COLOR MODE] key.
zThis displays the color mode selection window. The currently selected color mode is the 
one whose button is selected (filled in).
2Use the [T] and [S] keys to move the highlighting to the color mode you want 
to select, and then press the [ENTER] key.
zThis will select...

7
Momentarily Cutting Off the Input Source Image
1Press the [BLANK] key.
zThis temporarily cuts off the image from the input source and projects a black screen in 
its place.
2To resume projection of the image from the input source, press the [BLANK] key 
(or [ESC] key).
Note
You can specify projection of a black screen or blue screen, or a logo. For details, see 
“Blank Screen” under “Screen Settings Main Menu” on page 23.
Freezing an Image
Pressing the [FREEZE] key freezes the projected image.
To...

8
Displaying a Pointer in the Projected Image
You can select from among different pointer styles, including various arrow styles, for 
display in the projected image. Pointers can be used during a presentation to indicate or 
highlight a specific part of the image.
Note
Depending on the pointer style you are using, the pointer may not display properly 
when you are using keystone correction. If this happens, use the [KEYSTONE +] and 
[KEYSTONE –] keys to change the keystone correction value to zero.
To...

9
To select the pointer type
1Press the [POINTER] key to display the pointer.
2Keep pressing the [POINTER] key until the pointer you want is displayed.
zEach press of the [POINTER] key cycles through the available pointer types.
To clear the pointer from the image
Press the [ESC] key.
Changing the aspect ratio of the projected image
Press the [ASPECT] key to change the aspect ratio of the projected image. How the 
aspect ratio changes depends on the current input source.
Note
zFor details about how the...

10
Turning on the Eco Mode reduces lamp brightness to save power. The projector’s cooling fan 
also operates at a slower speed while the Eco Mode is turned on, which results in quieter 
operation.
Turn on the Eco Mode when your priority is quieter operation. Turn off the Eco Mode when 
your priority is maximum brightness.
To turn the Eco Mode on or off
Press [ECO] to toggle the Eco Mode on and off.
Note
(for USB port equipped model users)
Use the setup menu (page 11) to select the lamp mode when you have...