Casio Xj Sc210, Xj Sc215, Xj S32, Xj S37, Xj S42, Xj S47, Xj S52, Xj S57 Data Projector Users Guide

							11
Configuring Advanced Projector Settings
Your projector has a setup menu that you can use to configure advanced settings.
Displaying the Setup Menu
Pressing the [MENU] key displays the menu shown below in the center of the projection 
screen.
To exit the setup menu
Press the [MENU] key.
Configuring Setup Menu Settings
1Press the [MENU] key to display the setup menu.
2Use the [T] and [S] keys to select the main menu item you want by 
highlighting it.
3Press the [ENTER] key.
4Use the [T] and [S] keys to select the sub-menu item you want by highlighting 
it.
5Perform the required operation on the selected sub-menu item screen.
zThe guidance text explains the operations you need to perform to configure each setting.
6To return to the main menu from the sub-menu, press the [ESC] key.
7To exit the setup menu, press the [MENU] key.
Basic Setup Menu Operations
Main menu
The main menu includes nine (10 on the USB 
port equipped models) main menu items. 
The currently selected main menu item is the 
one that is highlighted.
Sub-menu
The sub-menu shows each individual setting 
under each main menu item, and its current 
setting.
Guidance text
Guidance text provides a brief description of the 
main key operations available for the operation 
you are currently performing. 
						

							12
Basic Setup Menu Example
The procedure below shows how to configure the following three settings:
 Image Adjustment 1 J Contrast
 Image Adjustment 1 J Color Mode
 Option Settings 1 J Eco Mode
Note
zCertain settings on the setup menu cannot be changed while there is no input signal 
to the projector. Because of this, you should configure setup menu settings after 
selecting an input source and starting projection.
zThis example covers basic steps only. For more detailed information, see “Setup Menu 
Contents” on page 18.
To configure the “Image Adjustment 1 J Contrast” setting
1Press the [MENU] key to display the setup menu.
2“Image Adjustment 1” is initially selected on the main menu, so simply press 
the [ENTER] key.
3Press the [T] key once to select “Contrast”.
4Use the [W] (lighter) and [X] (darker) keys to adjust contrast. 
						

							13
To configure the “Image Adjustment 1 J Color Mode” setting
5Press the [T] key once to select “Color Mode”.
6Press the [ENTER] key.
zThis displays the color mode menu.
7Use the [T] and [S] keys to select the color mode you want, and then press 
the [ENTER] key.
8After selecting the color mode you want, press the [ESC] key.
To configure the “Option Settings 1 J Eco Mode” setting
9Press the [ESC] key.
10Press the [T] key five times to select “Option Settings 1”.
11Press the [ENTER] key.
12Press the [T] key two times to select “Eco Mode”.
13Use the [W] and [X] keys to select “On” or “Off”.
14After you are finished, press the [MENU] key to exit the setup menu. 
						

							14
The password feature lets you keep unauthorized individuals from using the projector. You 
can specify whether password input is required whenever you turn on the projector, and you 
can specify and change the password as required. Use the setup menu “Option Settings 1 
J Power On Password” setting to configure power on password settings.
Inputting a Password
The password of your projector is not really a “word” made up of letters, but rather a 
sequence of remote controller key inputs. The following is the 8-key sequence that 
represents the initial factory default password.
Using the Password Feature
Note the following precautions whenever you use the password feature.
 The password feature protects against unauthorized use of the projector. Note that it is 
not an anti-theft measure.
 You will need to enter the initial factory default password the first time you use the 
projector after turning on the password feature. Change the initial factory default 
password to a different one of your choice as soon as possible after turning on the 
password feature.
 Remember that password operations are always performed using the remote controller, 
so you should take care not to lose or misplace the remote controller.
 Also note that you will not be able to input the password if the remote controller battery 
is dead. Replace the remote control battery as soon as possible after it starts to go low.
If you forget your password...
You will not be able to use the projector if you forget the password for some reason. If 
you forget the password, you will need to bring the following two items to your CASIO 
distributor to have the password cleared. Note that you will be charged to have the 
password cleared.
1. Personal identification (original or copy of you driver’s license, employee I.D., etc.)
2. Projector unit
Note that your CASIO distributor will not be able to clear the password of your projector 
unless you bring both of the items listed above.
Also, keep the projector’s warranty in a safe place.
Important!
Having your password cleared using the procedure described above will return all of the 
settings of your projector, except for the lamp time, to their initial factory defaults.
Password Protecting the Projector
[INPUT][AUTO][BLANK][FREEZE][S][T][W][X] 
						

							15
Keep a written record of your password!
You will not be able to use the projector if you forget its password. We strongly suggest 
that you keep a written or other type of record of the password so you can look it up 
when necessary.
To change the password
1Press the [MENU] key to display the setup menu.
2Use the [T] key to select “Option Settings 1”, and then press the [ENTER] key.
3Use the [T] key to select “Power On Password”, and then press the [ENTER] 
key.
zThis will display a dialog box prompting you to enter the current password.
4Enter the current password.
zIf the projector is still protected by the factory default password, perform the key 
operation shown below to enter it.
5After entering the current password, press the [ENTER] key.
zThis displays the Power On Password setting screen.
6Use the [T] key to select “Change Password”, and then press the [ENTER] key.
zThis will display a dialog box prompting you to enter the new password.
7Enter a key sequence up to eight key operations long.
zYou can use any of the following keys as part of your password key sequence. 
[INPUT], [AUTO], [BLANK], [FREEZE], [VOLUME], [COLOR MODE], [D-ZOOM +], 
[D-ZOOM –], [KEYSTONE +], [KEYSTONE –], [MENU], [POINTER], 
[ ], [U], […], [S], 
[T], [W], [X], [FUNC]
8After entering the new password, press the [ENTER] key.
zThis will display a dialog box prompting you to enter the same password again.
9Re-enter the same password key sequence you entered in step 7 and then press 
[ENTER].
zThe message “Your new password has been registered.” indicates that the password has 
been changed. Press the [ESC] key.
zIf the password you entered in this step is different from the one you entered in step 7, 
the message “The password you input is wrong.” appears. Press the [ESC] key to return 
to step 7.
[INPUT][AUTO][BLANK][FREEZE][S][T][W][X] 
						

							16
To turn password protection on and off
1Display the Power On Password setting screen by performing steps 1 through 5 
of the procedure under “To change the password” on page 15.
zAt this time, make sure that “Power On Password” is selected on the Power On 
Password setting screen.
2Use the [W] and [X] keys to select “On” or “Off”.
zChanging the power on password setting from “On” to “Off ” causes the confirmation 
dialog box shown below to appear.
Press the [ENTER] key to confirm that you want to turn on power on password 
protection, or [ESC] to exit the dialog box without doing anything.
3After you are finished, press the [MENU] key to exit the setup menu.
Entering the Password when Turning On the Projector
When you turn on the projector while password protection is turned on will cause a 
password input dialog box to appear on the projection screen. All projector operations will 
be accessible to you after you input the correct password and press the [ENTER] key.
Note
You can perform the projection size adjustment operation ([ZOOM +] / [ZOOM –] keys), 
focus operation ([FOCUS S] / [FOCUS T] keys), and power off operation ([ ] key) 
while the password input dialog box is on the projection screen. 
						

							17
You can use the procedures in this section to restore all of the settings on a particular main 
menu or all of the settings on the setup menu to their initial factory defaults.
To restore all settings on a particular main menu to their initial factory 
defaults
1Press the [MENU] key to display the setup menu.
2Use the [T] and [S] keys to select the main menu whose settings you want to 
restore to their initial factory defaults.
zYou can select Image Adjustment 1, Image Adjustment 2, Volume Adjustment, Screen 
Settings, Input Settings, Option Settings 1, or Option Settings 2.
3Press the [ENTER] key.
4Use the [T] key to select “Restore Menu Defaults”.
5Press the [ENTER] key.
zThis will display a confirmation screen like the screen shown below.
6Use the [S] key to select “Yes”.
7To restore the settings of the main menu to their initial defaults, press the 
[ENTER] key.
zTo exit the operation without doing anything, press [ESC] instead of [ENTER].
8After you are finished, press the [MENU] key to exit the setup menu.
Note
zThe language setting and the password are not returned to their initial factory defaults 
if you select Option Settings 1 in step 2.
zFor details about how the above procedure initializes settings, see the explanations of 
the settings under “Setup Menu Contents” on page 18.
Restoring Projector Settings to Their Initial Factory 
Defaults 
						

							
18
To restore all settings on the setup menu to their initial factory defaults
1Press the [MENU] key to display the setup menu.
2Use the [T] key to select “Restore All Defaults”, and then press the [ENTER] 
key.
3Use the [ T] key to select “Restore All Defaults” sub-menu, and then press the 
[ENTER] key.
z This displays a confirmation message asking if you want to initialize all settings.
4Use the [ S] key to select “Yes”.
5To restore all settings on the setup me nu to their initial defaults, press the 
[ENTER] key.
z This will restore all of the settings to their initial factory defaults, except for the 
Language, Lamp Time, and password settings.
z To exit the operation without doing anything, press [ESC] instead of [ENTER].
6After you are finished, press the [MENU] key to exit the setup menu.
This section contains tables that provide detai led explanations of all of the items included on 
the setup menu. The following describes the type of information that appears in each of the 
columns of the tables.
Setting Name
This column shows the names of the settings as they appear on the sub-menu.
Input
This column shows the input source  for which each setting is supported.
Input source names are abbreviated as R (R GB input), C (component video input), V (video 
input), and U (USB input, USB port equipped models only). The letter N indicates that the 
setting can be configured whil e there is no input signal.
Setting Unit
The setting unit indicates how a setting is stored.
“Source Specific” in this column indicates  that separate settings can be stored for each 
individual input source. For example,  you could store an “Image Adjustment 1  J Brightness” 
setting of –1 for RGB input and a setting of +1 for VIDEO input.
“Single” in this column indicates that a singl e setting is stored and applied, regardless of the 
input source.
Description
This column provides details about the setting item and how to select it. The initial default 
setting is indicated by an asterisk ( *).
Setup Menu Contents 
						

							
19
Image Adjustment 1 Main Menu
Setting NameInputSetting UnitDescription
Brightness RCVU Source  SpecificUse this sub-menu to adjust the brightness of the 
projected image. A larger value produces a brighter 
image.
Contrast RCVU Source  SpecificUse this sub-menu to adjust the contrast of the projected 
image. A larger value produces a stronger contrast.
Sharpness RCV Source 
Specific Use this sub-menu to adjust the sharpness of the outlines 
in the projected image. A larger value makes the image 
sharper, while a smaller value makes it softer.
Saturation RCV Source 
Specific Use this sub-menu to adjust the color saturation of the 
projected image. A larger value increases color saturation.
Tint RCV Source 
Specific Use this sub-menu to adjust the tint of the projected 
image. A larger value makes the overall image more 
bluish, while a smaller value makes the overall image 
more reddish. This setting is supported only when the 
signal is NTSC or NTSC4.43.
Color Mode RCVU Source  SpecificYou can select from among five different color mode 
settings to optimize the projected image in accordance 
with image contents and projection conditions.
Presentation:
Use this setting for standard presentations in a well-lit 
area.
Standard:
Use this setting when you want to highlight the colors of 
your presentation.
Graphics:
Use this setting when you want photographs and graphics 
to appear natural.
Theater:
Use this setting to bring out the dark portions of your 
images.
Blackboard:
Use this setting for easy viewing when projecting onto a 
blackboard.
Color Balance RCVU Source  SpecificThis sub-menu lets you adjust the color balance of the 
projected image.
Preset:
You can select from among three preset color balance 
settings: Warm, Normal,
* Cold. 
Color:
You can adjust the intensity of red, green, and blue within 
the range of –50 to +50. The intensity of a color 
increases along with the setting value. Color settings can 
be adjusted individually only when “Normal” is selected as 
the “Preset” setting. 
						

							
20
Image Adjustment 2 Main Menu
Noise FilterRCV Source 
Specific This setting is valid when VIDEO is selected as the input 
source.
Normal
*:
Select this setting when projecting a movie.
High:
Select this setting when projecting still images. 
In particular, this setting s hould be used when projecting 
still images from a digital camera connected to the 
projector’s VIDEO terminal.
Restore Menu 
Defaults RCVU Source 
Specific Use this sub-menu to return all of the sub-menu items on 
the Image Adjustment 1 main menu to their initial default
settings.
z
Restoring menu defaults when there is no input signal 
will restore defaults for the currently selected input 
source.
Setting NameInputSetting 
UnitDescription
Ve r t i c a l  
Po sitio n RCV Signal 
Specific Use this sub-menu to adjust the vertical position of the 
input source image within the projection area.
Horizontal 
Po sitio n RCV Signal 
Specific Use this sub-menu to adjust the horizontal position of the 
input source image within the projection area.
Frequency R Signal  SpecificWhen vertical bands appear in the projected image while 
RGB is selected as the input source, it means that the 
frequency setting is not correct. When this happens, use 
this setting to adjust the frequency manually.
Important!If, for some reason, your manual frequency settings 
cause the image input from the computer to 
disappear from the projection, you can press the 
[AUTO] key to perform an auto adjust operation, 
which should cause the image to appear.
Phase R Signal  SpecificWhen there is flickering in the projected image while RGB 
is selected as the input source, it means that the phase 
setting is not correct. When this happens, use this setting 
to adjust the phase manually.
Setting NameInputSetting 
UnitDescription