Casio Xj-460, Xj-560 Data Projector Users Guide
Here you can view all the pages of manual Casio Xj-460, Xj-560 Data Projector Users Guide. The Casio manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
Using the Setup Menu 51 3.Use the [W] and [X] keys to turn the power on password on or off. zChanging the power on password setting causes the message like the one shown below to appear. zPress the [ENTER] key to change the setting. If you do not want to change the setting, press the [ESC] key. To change the power on password 1.Display the power on password setting screen. zSee “To display the power on password setting screen” on page 50. 2.Use the [S] and [T] keys to select “Change Password”. 3.Press...
Page 52
52 Using the Setup Menu Option Settings1 J Custom Logo Settings With this sub-menu, you can cut part of the projected screen and use it to create an original logo, which you can display for the startup screen, the no signal screen, and the mute screen. An original logo that you create is called a “custom logo”. The custom logo settings let you create a custom logo, view your custom logo, and perform other operations. zCustom logo settings cannot be configured when there is no input signal. zA single...
Page 53
Using the Setup Menu 53 To capture a custom logo 1.Project the still image that you want to use as the custom logo. 2.Perform steps 1 through 4 under “Basic Setup Menu Operations” on page 24. Select the “Option Settings1” main menu, and then select the “Custom Logo Settings” sub-menu item. 3.Press the [ENTER] key. zThis displays the custom logo settings screen. 4.Use the [S] and [T] keys to select “Start Capture”, and then press the [ENTER] key. zThis causes a cross cursor to appear in the projected...
Page 54
54 Using the Setup Menu 7.Use the cursor keys to move the cross cursor and draw the selection boundary. 8.When the area you want to capture is enclosed by the selection boundary, press the [ENTER] key. zThis causes the message “Start image capture and registration as custom logo?” to appear. 9.Press the [ENTER] key to capture the image enclosed by the selection boundary. zAfter a few moments, a dialog box with the message “Image capture and registration as custom logo complete!” appears to let you...
Page 55
Using the Setup Menu 55 Configuring Custom Logo Capture Settings Before capturing a custom logo, configure the following settings to control its position, zoom, and other parameters when it is projected. zThe “Logo Vertical”, “Logo Horizontal”, and “Background Color” settings are not used when the zoom setting is “Resize Image To Fit”. zNote that you cannot change the above settings for a custom logo after you capture it. zThe following are some examples of how the above settings affect the custom...
Page 56
56 Using the Setup Menu To configure custom logo settings 1.Perform steps 2 and 3 under “To capture a custom logo” on page 53 to display the custom logo setting screen. 2.Use the [S] and [T] keys to select the custom logo item whose setting you want to change. 3.Use the [W] and [X] keys to select the setting you want. The button next to the currently selected setting is black ( z). 4.Repeat steps 2 and 3 to configure all of the custom logo settings you want. 5.After you are finished, press the...
Page 57
Using the Setup Menu 57 To initialize the custom logo zInitializing custom logo settings clears the currently registered custom logo and returns all of the settings of the custom logo setting screen to their initial defaults. 1.Perform steps 2 and 3 under “To capture a custom logo” on page 53 to display the custom logo setting screen. 2.Use the [S] and [T] keys to select “Initialize Custom Logo Settings”, and then press the [ENTER] key. zThis displays a confirmation message asking if you want to...
Page 58
58 Using the Setup Menu Option Settings1 J Language This sub-menu lets you specify the language to use for messages, setup menus, etc. Input Source Specific Menu Items Setting Storage A single setting is stored, which is applied to all input sources. zThis setting is required the first time you turn on the projector. For more information, see “Specifying the Display Message Language” in the separate “User’s Guide (Basic Operation)”. Option Settings1 J Alert Tones This sub-menu lets you turn alert...
Page 59
Using the Setup Menu 59 Option Settings1 J Restore Menu Defaults This sub-menu returns all of the sub-menu items on the Option Settings1 main menu to their initial default settings. zYou can perform initialization even when there is no input signal. In this case, the initialization is performed for the currently selected input source. zThe Auto Adjust item is initialized only when RGB is selected as the input source. All other items are always initialized, regardless of the currently selected input...
Page 60
60 Using the Setup Menu Option Settings2 J Power On AF/AK Mode You can specify either of two different auto adjustment operations to be performed whenever the projector is turned on. Input Source Specific Menu Items Setting Explanations Continuous AF/AK: Turning on the projector while this setting is selected displays an alignment chart and performs a continuous Auto Focus operation. Pressing the [AF/AK] key at this time performs auto keystone correction. Off: Turning on the projector while this...