Home > Casio > Projector > Casio Xj-460, Xj-560 Data Projector Users Guide

Casio Xj-460, Xj-560 Data Projector Users Guide

Here you can view all the pages of manual Casio Xj-460, Xj-560 Data Projector Users Guide. The Casio manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 21

Using the Setup Menu
21
Using the Setup Menu
Pressing the [MENU] key while an image is being projected displays the setup menu on the 
projected image. The setup menu can be used to configure a variety of different projector 
settings. The following table shows the menu items that are available in the Setup Menu.
Setup Menu Overview
Main menu Sub-menu Sub-menu Item Type*1Input source*2
See 
page
RCS V–
Image 
Adjustment Brightness Value Setting 31
Contrast Value Setting 31
Sharpness Value Setting 31...

Page 22

22
Using the Setup Menu
*6 This setting can be configured only when the input source is RGB/Component.
*7 This setting can be configured only when the input source is VIDEO.
*8 This setting can be configured only when the input source is S-VIDEO.
*9 This is a special sub-menu item that is different from other types. For details, see 
“Option Settings1 J Power On Password” on page 48.
*10 This setting can be configured only when the input source is RGB.
*11 This is a special sub-menu item that is...

Page 23

Using the Setup Menu
23
Before Configuring Menu Settings
Always remember that the settings you configure on the setup menu are applied for the input 
source (RGB, Component, S-VIDEO, VIDEO) that was selected when you displayed the setup 
menu. Note the following important points.
zThe items that appear on the setup menu depend on the currently selected input source 
and other factors.
Some items apply to a certain specific input source, while some apply to multiple input 
sources.
zEven for menu items...

Page 24

24
Using the Setup Menu
This section explains projector operations you need to perform while configuring setup menu 
settings. It also provides details about each sub-menu item type.
Basic Setup Menu Operations
The following is the general flow of the steps you need to perform when configuring setup 
menu operations.
1.Select the input source whose settings you want to configure.
2.Press the [MENU] key.
zThis causes the setup menu screen to appear in the upper left corner of the projected 
image.
zThe...

Page 25

Using the Setup Menu
25
4.Press the [ENTER] key.
zThis selects the top item in the sub-menu.
5.Use the [S] and [T] keys to select the sub-menu item whose setting 
you want to change.
6.Change the setting or select an option to configure the currently 
selected sub-menu item.
zThe operation you need to perform depends on the sub-menu item type. See “Setup 
Menu Overview” on page 21 for more information.
zFor information about how to configure settings for each sub-menu item, see “Sub-menu 
Operations” on...

Page 26

26
Using the Setup Menu
Sub-menu Operations
This section explains steps you need to perform in order to configure settings for each sub-
menu item type (value, selection, setting screen, execution, information).
Value Setting Type Sub-menu Item
This type of sub-menu item consists of a value and a bar graph.
Examples: Image Adjustment J Brightness; Screen Settings J Vertical Keystone Correction
Operation: Press the [W] key to make the value smaller, or the [X] key to make it larger. 
A value can be...

Page 27

Using the Setup Menu
27
Setting Screen Type Sub-menu Item
This type of sub-menu item displays a separate screen that you use to configure its settings.Examples: Image Adjustment J Color Mode; Option Settings1 J Language, etc.
Operation: The following example shows how to configure settings for Input Settings J 
Video Signal, S-Video Signal
1.Press the [VIDEO] key to select the VIDEO input terminal as the input 
source.
2.Perform steps 2 through 4 under “Basic Setup Menu Operations” on 
page 24. On the...

Page 28

28
Using the Setup Menu
Execution Type Sub-menu Item
This type of sub-menu item returns a setting to its initial default value.
Examples: Image Adjustment J Restore Menu Defaults; Operational Info J Reset Lamp 
Time
)Initializing Settings (page 29)
)Resetting the Lamp Time (User’s Guide (Basic Operation))
Information Type Sub-menu Item
This type of sub-menu item provides status and setup information.
Examples: Operational Info J Lamp Time; Operational Info J Input Signal
Refer to the following for...

Page 29

Using the Setup Menu
29
Initializing Settings
The setup menu lets you initialize the settings of a particular main menu item, or for all 
setup menu items.
To initialize the settings of a particular main menu item
Example: To initialize the settings of the “Image Adjustment” main menu item.
zPerforming the following procedure returns all of the sub-menu items under the currently 
selected main menu item to their initial default settings.
zInitializing the settings of the “Image Adjustment” main menu item...

Page 30

30
Using the Setup Menu
To initialize all menu settings
zPerforming the following procedure initializes all sub-menu items for all menus, except for 
the language (Option Settings1 J Language) and the lamp time (Operational Info J 
Lamp Time).
zNote that initialization does not delete the custom logo. 
1.Perform steps 1 through 4 under “Basic Setup Menu Operations” on 
page 24. Select the “Restore All Defaults” main menu, and then select 
the “Restore All Defaults” sub-menu item.
2.Press the [ENTER]...
Start reading Casio Xj-460, Xj-560 Data Projector Users Guide

Related Manuals for Casio Xj-460, Xj-560 Data Projector Users Guide

All Casio manuals