Casio Xj-460, Xj-560 Data Projector Users Guide

Using the Setup Menu
41

Screen Settings 
J Mute Screen
This sub-menu lets you specify what should be projected during mute (page 13).
Input Source Specific Menu Items
Setting Explanations
Blue: Displays a blue screen during mute.
Black: Displays a black screen during mute.
Logo: Displays a logo screen during mute.
A built-in logo screen is the initial default startup screen. You can also create a 
custom logo, if you want. For details, see “Option Settings1 J Custom Logo 
Settings” on page 52.
Setting...

42
Using the Setup Menu
Input Settings

Input Settings 
J RGB Input
This sub-menu lets you specify the type of input signal in accordance with the device 
connected to the projector’s RGB terminal.
Input Source Specific Menu Items
Setting Explanations
RGB: Select this setting when a computer is connected to the projector’s RGB 
input terminal. For details about connection, see “Connecting a Computer 
to the Projector” in the separate “User’s Guide (Basic Operation)”.
Component: Select this setting when...

Using the Setup Menu
43
Setting Explanations
Auto: Select this setting to have the projector switch the video signal system 
automatically in accordance with the input signal from the video device 
that is connected to the VIDEO or S-VIDEO input terminal. This is the 
setting you should normally use.
Other settings: Each setting selects the applicable video system. Use these settings 
when you want to specify only one specific video signal for the VIDEO 
and S-VIDEO input terminal.
Setting Storage
This...

44
Using the Setup Menu

Input Settings 
J Signal Name Indicator
This sub-menu lets you specify whether or not the name of the currently selected input 
source should be displayed in the projected image.
Input Source Specific Menu Items
Setting Explanations
On: Turns on display of the name of the currently selected input source in the 
projected image. 
Off: Turns off display of the input source name.
Setting Storage 
A single setting is stored, which is applied to all input sources.

Input Settings 
J...

Using the Setup Menu
45

Input Settings 
J Restore Menu Defaults
This sub-menu returns all of the sub-menu items on the Input Settings main menu to their 
initial default settings.
zYou can perform initialization even when there is no input signal. In this case, the 
initialization is performed for the currently selected input source.
zBasically, initialization initializes the settings of the current input source. Note, however, that 
the signal name indicator setting is always initialized, regardless of...

46
Using the Setup Menu

Option Settings1 
J Auto Adjust
This sub-menu lets you specify whether or not auto adjustment should be performed (page 8) 
when RGB is selected as the input source.
Input Source Specific Menu Items
Setting Explanations
On:Turns on auto adjustment, which is performed when RGB is selected as the input 
source.
Off: Turns off auto adjustment.
Setting Storage
This setting is saved for the RGB input terminal only.

Option Settings1 
J Low-noise Mode (XJ-560 only)
The low-noise mode...

Using the Setup Menu
47

Option Settings1 
J Auto Power Off
This sub-menu lets you turn Auto Power Off (see “Turning Off the Projector” in the separate
“User’s Guide (Basic Operations)”) on or off.
Input Source Specific Menu Items
Setting Explanations
On: Turns on Auto Power Off.
Off: Turns off Auto Power Off.
Setting Storage
A single setting is stored, which is applied to all input sources.

Option Settings1 
J Key Lock
This sub-menu lets you turn key lock on and off.
Input Source Specific Menu Items...

48
Using the Setup Menu
zBesides the menu operation explained above, the following operations can also be used 
to turn off key lock.
zWhile the projector is on: Hold down the projector’s [ESC] key for about five seconds.
zWhile the projector is off: Simultaneously hold down the projector’s [ESC] and [ ] 
(power) keys for about five seconds. This turns on the 
projector and also turns off key lock.
zYou can use the above projector operations to turn off key lock if the remote controller 
batteries...

Using the Setup Menu
49
Input Source Specific Menu Items 
Setting Explanation
On: Turns on the power on password, which requires input of a password to turn on 
the projector.
Off: Turns off the password, which allows the projector to be operated without 
inputting a password. 
Setting Storage
A single setting is stored, which is applied to all input sources.
Using the Password Input Dialog Box
The password input dialog box will appear when any one of the following occurs.
zWhen you turn on the projector...

50
Using the Setup Menu
To display the power on password setting screen
1.Perform steps 1 through 4 under “Basic Setup Menu Operations” on 
page 24. Select the “Option Settings1” main menu, and then select 
the “Power  O n Pa sswo rd” sub-menu item.
2.Press the [ENTER] key.
zThis displays a password input dialog box like the one shown below.
3.Input the current password.
zFor information about how to input the password, see “Using the Password Input 
Dialog Box”.
4.Press the [ENTER] key.
zIf the password...