Casio Ravine 3 Manual

130
SETTINGS & TOOLS
Pedometer: Counts your steps with the pedometer. (On/Off)
Calibration: Calibrates the electronic compass.
Restore Defaults: Returns G’zGEAR
® settings to initial value. 
How To Use
You can display how to use G’zGEAR®. 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. Press 
 To o l s. 
2. Select G’zGEAR, then press the Center Select Key [OK],  
How To Use.
Bluetooth Menu
Your handset supports the following...

131
SETTINGS & TOOLS
NOTES
Read the user guide of each Bluetooth® accessory that you are 
trying to pair with your handset because the instructions may 
differ. 
Bluetooth
® accessories/peripherals must have a passkey to work 
with the mobile device. •
•
Power
To toggle Bluetooth® power On/Off: 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Press  Bluetooth Menu. 
3. Press the Left Soft Key [Turn On]. 
NOTES
By default, your...

132
SETTINGS & TOOLS
NOTE
Above step automatically turns on your handset’s Bluetooth® power, 
even if it is turned off. 
4. The handset will prompt you with the following message on the 
main display: PLACE DEVICE YOU ARE CONNECTING TO IN 
DISCOVERABLE MODE. Press the Center Select Key [OK].
5. The device will appear in the ADD NEW DEVICE menu. Select 
the device you wish to pair with, then press the Center Select Key 
[PAIR].
6. The handset may prompt you for the passkey. Consult the 
Bluetooth®...

133
SETTINGS & TOOLS
8. Once connected, you will see the device listed in the Bluetooth 
Menu and the Bluetooth® device connected icon  will appear at 
the top of the main display. 
NOTES
In the Bluetooth Menu, you can disconnect the connected device 
with an icon 
 by pressing the Center Select Key [DROP]. 
Conversely, you can reconnect by pressing the Center Select Key 
[OK] again. 
When an audio device is connected, you can select another 
device and the connection is automatically transferred from...

134
SETTINGS & TOOLS
To view brief descriptions of the profiles supported by the phone, 
press  Supported Profiles. Select one of the profiles, then 
press the Center Select Key [VIEW]. 
Settings for Paired Device
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. 
2. Press  Bluetooth Menu. 
3. Select the paired device, then press the Right Soft Key [Options]. 
4. Select one of the following options: 
Remove Device: Removes a device...

135
SETTINGS & TOOLS
4. Your contact entries will be displayed in alphabetical order. Select 
the contact you want to send, then press the Center Select Key 
[MARK]. 
5. Press the Left Soft Key [Done].
6. Select the receiving device and then press the Center Select Key 
[OK].
Sending My Name Card
To send My Name Card to the paired device via Bluetooth®: 
NOTE
Register My Name Card before performing the following steps.
For information about how to register My Name Card, see page 60.
1.  From idle mode,...

136
SETTINGS & TOOLS
2. Select My Name Card, then press the Center Select Key [OK].
3. Press the Right Soft Key [Options] then  Via Bluetooth, 
 Pull. 
4. Select the device and then press the Center Select Key [OK]. 
Receiving a Name Card
To save a Name Card received via Bluetooth® to your Contact List: 
1.  When Incoming Security is set to Always Ask, the message 
“Connect to:[Device Name]” will appear on your handset’s display 
when another Bluetooth
® device sends a name card to your 
handset. If...

137
SETTINGS & TOOLS
6. Select the receiving device and then press the Center Select Key 
[OK].
Receiving an Image
To receive and save an image sent from the paired device via 
Bluetooth®:
1.  When Incoming Security is set to Always Ask, the message 
“Connect to:[Device Name]” will appear on your handset’s display 
when another Bluetooth
® device sends an image to your handset. 
If you select Ye s and then press the Center Select Key [OK], the 
message “Want to Receive files?” will appear. 
  When...

138
SETTINGS & TOOLS
NOTES
When Keyguard Timer is set to Lock on Flip Close, the side keys 
are locked as soon as the flip is closed. When unlocked with the 
flip closed, the handset will be locked again if you do not operate 
it within seven seconds. 
When you open the flip, the side keys will unlock. 
Even when locked, the side keys are still operational in the 
following cases:
During alarms and schedule alerts.
When the handset receives an incoming call.
During a call.
When the handset receives a PT...

139
SETTINGS & TOOLS
PTT Settings
You can set the following Push To Talk (PT T) features.
PTT Mode
You can use the following procedure to turn the PT T feature On or Off.
When PT T is turned on, you will be able to send and receive PT T calls 
or alerts.
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. Press 
	 PTT Settings,  PTT Mode. 
2. Select On or Off, then press the Center Select Key [OK].
NOTE
The 3G or 1x service indicator...