Casio Ravine 3 Manual

120
SETTINGS & TOOLS
 6. Select the type of icon, then press the Center Select Key 
[ENTER].
 7. Select the icon color, then press the Center Select Key [ENTER].
 8. Enter the point name, then press the Center Select Key [ENTER].
 9. Confirmation for the point creation appears. Press the Center 
Select Key [ENTER] to register the point.
 10. Press the Center Select Key [OK].
NOTES
The Earth Compass cannot be used while the handset is being 
charged. 
When using the electronic compass, orient the handset...

121
SETTINGS & TOOLS
To calibrate the electronic compass, wave the handset in the 
shape of a large figure eight, making sure that each of six sides of 
the handset faces down toward the ground by rolling your wrists 
as illustrated in the figure below for about 15 seconds. 
Calibrate the electronic compass with the handset closed before 
using it with the handset closed. 
To calibrate the electronic compass with the flip 
closed, hold the handset as shown in the figure to 
the right. 
The electronic...

122
SETTINGS & TOOLS
Near metal objects (desks, lockers, etc.), household appliances 
(T Vs, computers, speakers, etc.), or permanent magnets 
(magnetic necklaces, etc.)  
If you suspect a reading error, move away from the above 
locations and try again.  -
Walking Counter
In Pedometer mode, the number of steps you take in a day are 
measured with the pedometer, and the distance you walked and the 
estimated number of calories you burned are displayed. 
In Virtual Trek mode, the distance you hike is...

123
SETTINGS & TOOLS
Pedometer Settings: Enter your height, weight, age, and 
gender to calculate the traveled distance and burned calories 
from your steps. 
Pedometer On /Off Settings: Set whether to count your steps 
with the pedometer. 
Left Soft Key [Home]: Returns to G’zGEAR
® Home menu. 
NOTES
The pedometer counts your steps while the handset power is ON. 
You do not need to activate G’zGEAR
® to count your steps. 
Your steps are counted every day from midnight for 24 hours. 
The pedometer detects...

124
SETTINGS & TOOLS
2. Select G’zGEAR, then press the Center Select Key [OK],  
Thermometer.
3. The following keys are available in the Thermometer: 
Directional Key   left or right: Switches the mode.
Directional Key  up or down: Changes the date for displaying 
the information. (Only in Temperature Comparison mode)
Right Soft Key [Options]: Displays the following option:
About: Displays the description about the Thermometer tool. 
Thermometer: Switches to Thermometer mode.
Temperature Comparison:...

125
SETTINGS & TOOLS
Tides
High and low tide times are displayed. 
The One-Day View mode displays the tidal graph for a single day. 
The Current View mode displays the current tide and the time 
appropriate for fishing. 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. Press 
 To o l s. 
2. Select G’zGEAR, then press the Center Select Key [OK],  
Tides.
3. The following keys are available in the Tides:
Directional Key   left or...

126
SETTINGS & TOOLS
Sunrise Sunset
The times of sunrise and sunset are displayed. 
The Tracking mode displays the position of the Sun. 
The Day/Night mode displays the ratio between day and night in 
numeric and graphic form. 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. Press 
 To o l s.
2. Select G’zGEAR, then press the Center Select Key [OK],  
Sunrise Sunset.
3. The following keys are available in the Sunrise Sunset:...

127
SETTINGS & TOOLS
Astro Calendar
The Moon’s phase and date in the lunar cycle, and days until full 
moon and new moon are displayed. 
Lunar Phase mode displays the phase of the Moon. 
Cosmic View mode displays the location of Sun, Moon and Earth. 
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. Press 
 To o l s. 
2. Select G’zGEAR, then press the Center Select Key [OK], 	 
Astro Calendar.
3. The following keys are available in...

128
SETTINGS & TOOLS
Star Gazer
The Star Gazer displays the stars in the sky and the names of the 
constellations and major stars.
1.  From idle mode, press the Center Select Key [MENU], select 
Settings & Tools, then press the Center Select Key [OK]. Press 
 To o l s.
2. Select G’zGEAR, then press the Center Select Key [OK], 
 
Star Gazer.
3. The following keys are available in the Star Gazer:
Directional Key   left or right: Changes the angle.
Directional Key  up or down: Changes the height.
 :...

129
SETTINGS & TOOLS
4. To change the tool displayed on the front display, press the Bottom 
Side Key  to unlock the side keys of handset, then press the 
Volume Keys 
 up or down.
5. To end G’zGEAR® mode, press and hold the Bottom Side Key . 
NOTES
If the handset is closed while displaying the G’zGEAR® tool on the 
main display, the tool will be displayed on the front display. 
On the front display, the following information is displayed for 
each tool: 
Earth Compass: Compass
Walking Counter: Steps,...