Casio Exilim High Speed Ex Fc100 Users Guide

101Viewing Snapshots and Movies
The following are operations that are supported after you press [SET] to 
start image playback.
NOTE
• Multiple images shot using normal-speed continuous shutter are stored individually 
and are not grouped. This means they can be displayed individually (page 31) but 
not as a CS group.
[4] [6]During playback, changes the playback direction and playback speed.
While playback is paused, scrolls forward or back.
• Playback speed cannot be adjusted while the displayed image...

102Viewing Snapshots and Movies
You can use the following procedures to delete images while playback is in progress 
or paused.
.Deleting a Specific CS Group File
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [
2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Delete” and then press [SET].
3.Use [4] and [6] to display the image you want to delete.
4.Use [8] and [2] to select “Delete” and then press [SET].
• To delete other files, repeat...

103Viewing Snapshots and Movies
Use the following to divide up a CS Group into individual images.
.Dividing Up a Specific CS Group
1.While a CS group is displayed or while the images of a CS group are 
scrolling on the monitor screen, press [MENU].
2.Use [4] and [6] to select “PLAY” tab.
3.Use [8] and [2] to select “Divide Group” and then press [6].
4.Use [4] and [6] to display the CS group folder whose CS group you 
want to divide up.
5.Use [8] and [2] to select “Divide” and then press [SET].
• To...

104Viewing Snapshots and Movies
Use the following procedure to copy an image in a CS group to a location outside of 
the group.
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [
2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Copy”, and then press [SET].
3.Use [4] and [6] to display the image you want to copy.
4.Use [8] and [2] to select “Copy”, and then press [SET].
NOTE
• The functions below cannot be performed on snapshots inside a CS...

105Viewing Snapshots and Movies
1.In the PLAY mode, use [4] and [6] to scroll through the images until 
the one you want is displayed.
2.Slide the zoom controller towards z ([) to 
zoom.
You can use [8], [2], [4], and [6] to scroll the 
zoomed image on the monitor screen. Slide the zoom 
controller towards w to unzoom the image.
– When monitor screen contents are turned on, a 
graphic in the lower right corner of the screen 
shows what part of the zoomed image is currently 
displayed.
– To exit the zoom...

106Viewing Snapshots and Movies
1.Use the AV cable that comes with the camera to connect it to the TV.
• Make sure that you insert the cable connector into the USB/AV port until you 
feel it click securely into place. Failure to insert the connector fully can result in 
poor communication or malfunction.
• Note that even while the connector is fully inserted, you 
still will be able to see the metal part of the connector as 
shown in the illustration.
• Make sure that the camera is turned off before...

107Viewing Snapshots and Movies
3.Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing 
on the camera’s monitor screen.
• Pressing [ON/OFF] or [r] (REC) will not turn on the camera while the AV 
cable is connected.
• You also can change the aspect ratio of the screen and the video output 
system (page 157).
4.Now you can display images and play back movies as you normally do.
IMPORTANT!
• Before connecting to a TV to display images, be...

108Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform 
other playback operations.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Slideshow
For information about menu operations, see page 80.
Playing a Slideshow on the Camera (Slideshow)
Start
Starts the slideshow
Images
Specifies the type of images to be included in the slideshow
All images: Snapshots, movies, continuous shutter images
All images except 
Z: All...

109Other Playback Functions (PLAY)
• To stop the slideshow, press [SET] or [MENU]. Pressing [MENU] stops the 
slideshow and returns to the menu screen.
• Adjust audio volume by pressing [2] and then press [8] or [2] during playback.
• All button operations are disabled while the slideshow is transitioning from one 
image to another.
• The time required for transition from one image to another may be longer in the 
case of an image that was not recorded with this camera.
You can replace the built-in...

110Other Playback Functions (PLAY)
1.Connect the camera to your computer (pages 132, 141).
If you plan to save the music files to the camera’s memory card, make sure the 
card is loaded in the camera.
2.Perform one of the following operations to open the memory card or 
built-in memory.
This will cause the camera to be recognized by your computer as a Removable 
Disk (Drive).
• Windows
1Windows Vista: Start * Computer
Windows XP: Start * My Computer
Windows 2000: Double-click “My Computer”.
2Double-click...