Casio Exilim High Speed Ex Fc100 Users Guide

							101Viewing Snapshots and Movies
The following are operations that are supported after you press [SET] to 
start image playback.
NOTE
• Multiple images shot using normal-speed continuous shutter are stored individually 
and are not grouped. This means they can be displayed individually (page 31) but 
not as a CS group.
[4] [6]During playback, changes the playback direction and playback speed.
While playback is paused, scrolls forward or back.
• Playback speed cannot be adjusted while the displayed image is 
zoomed.
[SET]Toggles between pause and play.
Zoom 
controllerZooms the image.
• You can use [8], [2], [4], and [6] to scroll the zoomed image on 
the monitor screen.
[MENU]Exits CS group playback.
[8] (DISP)Cycles through information display formats.
[2]Displays the “CS Frame Edit” menu.
Downloaded From camera-usermanual.com Casio Manuals 
						

							102Viewing Snapshots and Movies
You can use the following procedures to delete images while playback is in progress 
or paused.
.Deleting a Specific CS Group File
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [
2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Delete” and then press [SET].
3.Use [4] and [6] to display the image you want to delete.
4.Use [8] and [2] to select “Delete” and then press [SET].
• To delete other files, repeat steps 3 and 4.
• To exit the delete operation, press [MENU].
NOTE
• Either of the following methods is recommended when you want to keep only one 
of the images in a CS group and delete all of the others.
– Copy the image you want to keep to a file located outside of the CS group and 
then delete the CS group.
– Protect the image you want to keep and then delete the CS group.
.Deleting All Files in a CS Group
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [
2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Delete” and then press [SET].
3.Use [8] and [2] to select “Del Group Images” and then press [SET].
4.Use [8] and [2] to select “Yes”, and then press [SET].
Deleting Continuous Shutter Images
Downloaded From camera-usermanual.com Casio Manuals 
						

							103Viewing Snapshots and Movies
Use the following to divide up a CS Group into individual images.
.Dividing Up a Specific CS Group
1.While a CS group is displayed or while the images of a CS group are 
scrolling on the monitor screen, press [MENU].
2.Use [4] and [6] to select “PLAY” tab.
3.Use [8] and [2] to select “Divide Group” and then press [6].
4.Use [4] and [6] to display the CS group folder whose CS group you 
want to divide up.
5.Use [8] and [2] to select “Divide” and then press [SET].
• To divide up other CS group files, repeat steps 4 and 5.
.Dividing Up All CS Groups
1.While a CS group is displayed or while the images of a CS group are 
scrolling on the monitor screen, press [MENU].
2.Use [4] and [6] to select “PLAY” tab.
3.Use [8] and [2] to select “Divide Group” and then press [6].
4.Use [8] and [2] to select “Divide All Groups” and then press [SET].
5.Use [8] and [2] to select “Yes”, and then press [SET].
• Once a CS group is divided, it cannot be regrouped.
Dividing Up a CS Group
Downloaded From camera-usermanual.com Casio Manuals 
						

							104Viewing Snapshots and Movies
Use the following procedure to copy an image in a CS group to a location outside of 
the group.
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [
2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Copy”, and then press [SET].
3.Use [4] and [6] to display the image you want to copy.
4.Use [8] and [2] to select “Copy”, and then press [SET].
NOTE
• The functions below cannot be performed on snapshots inside a CS group folder. 
Before using either of these functions, perform the above procedure to copy the 
image first.
White Balance, Brightness, Trimming, Rotation, Resize
Copying a CS Group Image
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							105Viewing Snapshots and Movies
1.In the PLAY mode, use [4] and [6] to scroll through the images until 
the one you want is displayed.
2.Slide the zoom controller towards z ([) to 
zoom.
You can use [8], [2], [4], and [6] to scroll the 
zoomed image on the monitor screen. Slide the zoom 
controller towards w to unzoom the image.
– When monitor screen contents are turned on, a 
graphic in the lower right corner of the screen 
shows what part of the zoomed image is currently 
displayed.
– To exit the zoom screen, press [MENU].
– Though the maximum image zoom factor is 8X, 
certain image sizes may not allow zooming up to 
the full 8X.
• Pressing [SET] will lock the current zoom factor for the on-screen image. You 
can then use [4] and [6] to scroll between images, using the same zoom 
factor. Pressing [SET] again will unlock the zoom factor and allow you to use 
[8], [2], [4] and [6] to move around the currently displayed images. This 
function cannot be used while viewing CS group images or movies. Also, CS 
group images and movies will not appear when you are scrolling images with 
[4] and [6].
1.In the PLAY mode, slide the zoom controller 
towards w (]).
Use [8], [2], [4] and [6] to move the selection 
boundary around the image menu.
To view a particular image, use [8], [2], [4], or [6] to 
move the selection boundary to the image you want 
and then press [SET].
• In the case of a movie or a continuous shutter (CS) 
file, the first frame of the file will be displayed.
Zooming an On-screen Image
Displaying the Image Menu
Image area
Current display areaZoom factor
Boundary
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							106Viewing Snapshots and Movies
1.Use the AV cable that comes with the camera to connect it to the TV.
• Make sure that you insert the cable connector into the USB/AV port until you 
feel it click securely into place. Failure to insert the connector fully can result in 
poor communication or malfunction.
• Note that even while the connector is fully inserted, you 
still will be able to see the metal part of the connector as 
shown in the illustration.
• Make sure that the camera is turned off before plugging 
in or unplugging the cable. Check the user 
documentation that comes with the TV for information 
about requirements before plugging into or unplugging from the TV.
2.Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is 
connected.
Viewing Snapshots and Movies on a TV Screen 
YellowAV cable (bundled)
USB/AV port White
Making sure that the 6 mark on the 
camera is aligned with the 4 mark of the 
AV cable connector, connect the cable to 
the camera.
Audio Video
VIDEO IN jack (yellow)AUDIO IN jack (white)
TV
Downloaded From camera-usermanual.com Casio Manuals 
						

							107Viewing Snapshots and Movies
3.Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing 
on the camera’s monitor screen.
• Pressing [ON/OFF] or [r] (REC) will not turn on the camera while the AV 
cable is connected.
• You also can change the aspect ratio of the screen and the video output 
system (page 157).
4.Now you can display images and play back movies as you normally do.
IMPORTANT!
• Before connecting to a TV to display images, be sure to configure the camera’s 
[r] (REC) and [p] (PLAY) buttons for “Power On” or “Power On/Off” (page 156).
• Audio is initially output by the camera at maximum volume. When you first start 
displaying images, set the TV volume control at a relatively low level and then 
adjust it as required.
NOTE
• Audio is monaural.
• Some TVs may not be able to output images and/or audio correctly.
• All icons and indicators that appear on the monitor screen also appear on the TV 
screen. You can use [8] (DISP) to change the display contents.
Recording Camera Images to a DVD Recorder or Video Deck
Use the following method to connect the camera to the recording device using the 
camera’s bundled AV cable.
– DVD recorder or video deck: Connect the AV cable to the VIDEO IN and AUDIO IN 
terminals.
– Camera: Connect the AV cable to the USB/AV port
You can play a slideshow of snapshots and movies on the camera and record it on a 
DVD or video tape. You can record movies by selecting “» Only” for the slideshow 
“Images” setting (page 108). When recording images to an external device, use [8] 
(DISP) to clear all indicators from the monitor screen (page 159).
For information about connecting a monitor to the recording device and about how to 
record, see the user documentation that comes with the recording device you are 
using.
Downloaded From camera-usermanual.com Casio Manuals 
						

							108Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform 
other playback operations.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Slideshow
For information about menu operations, see page 80.
Playing a Slideshow on the Camera (Slideshow)
Start
Starts the slideshow
Images
Specifies the type of images to be included in the slideshow
All images: Snapshots, movies, continuous shutter images
All images except 
Z: All non-continuous shutter (CS) imagesT Only: Snapshots only
» Only: Movies only
One Image: One single selected image (selected using [4] and [6])
Time
Time from the start to the end of the slideshow
1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes
Interval
Amount of time each image remains displayed
Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”.
If you specify a value from 1 to 30 seconds, movies play from beginning to end.
When the slideshow reaches a movie file while “MAX” is selected, only the first 
frame of the movie will displayed.
Downloaded From camera-usermanual.com Casio Manuals 
						

							109Other Playback Functions (PLAY)
• To stop the slideshow, press [SET] or [MENU]. Pressing [MENU] stops the 
slideshow and returns to the menu screen.
• Adjust audio volume by pressing [2] and then press [8] or [2] during playback.
• All button operations are disabled while the slideshow is transitioning from one 
image to another.
• The time required for transition from one image to another may be longer in the 
case of an image that was not recorded with this camera.
You can replace the built-in slideshow background music with other music from your 
computer.
Supported File Types:
• IMA-ADPCM format WAV files
• Sampling Frequencies: 22.05 kHz/44.1 kHz
• Quality: Monaural
Number of Files: 9
File names: SSBGM001.WAV to SSBGM009.WAV
• Create the music files on your computer using the above names.
• Regardless of which effect pattern you select, the music files you store in camera 
memory are played back in name sequence.
Effect
Select the effect you want.
Pattern 1 to 5: Plays background music and applies an image change effect.
• Patterns 2 through 4 have different background music, but they all use the 
same image change effect.
• Pattern 5 can be used for playback of snapshots only (except for those that 
are part of a CS group), and the “Interval” setting is ignored.
• Movies that include audio are played back without background music. Movies 
that do not include audio are played back with background music.
• The currently selected image change effect setting is disabled automatically 
in following cases.
– When playing a slideshow for which “» Only” or “One Image” is selected 
for the “Images” setting
– When the interval setting is “MAX”, 1 second, or 2 seconds
– Before and after playback of a movie
– During CS group playback (Except the Pattern 1 effect)
Off: No image change effect or background music
Transferring Music from Your Computer to Camera Memory
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							110Other Playback Functions (PLAY)
1.Connect the camera to your computer (pages 132, 141).
If you plan to save the music files to the camera’s memory card, make sure the 
card is loaded in the camera.
2.Perform one of the following operations to open the memory card or 
built-in memory.
This will cause the camera to be recognized by your computer as a Removable 
Disk (Drive).
• Windows
1Windows Vista: Start * Computer
Windows XP: Start * My Computer
Windows 2000: Double-click “My Computer”.
2Double-click “Removable Disk”.
•Macintosh
1Double-click the camera’s drive icon.
3.Create a folder named “SSBGM”.
4.Double-click the “SSBGM” folder you created and copy the 
background music file to it.
• See the user documentation that comes with your computer for information 
about moving, copying, and deleting files.
• If there are background music files both in built-in memory and on the memory 
card loaded in the camera, the files on the memory card take priority.
• See page 148 for information about camera folders.
5.Disconnect the camera from the computer (pages 134, 143).
Downloaded From camera-usermanual.com Casio Manuals