Casio Exilim High Speed Ex Fc100 Users Guide

							81Advanced Settings
3.Use [8] and [2] to select the menu item you 
want, and then press [6].
4.Use [8] and [2] to change the setting.
5.After the setting is the way you want, press 
[SET].
• Pressing [4] registers the selected setting and 
returns to the menu.
• To configure settings on another tab after 
pressing [
4] to return to the menu, use [8] to 
move the highlighting up to the tabs, and then 
use [
4] and [6] to select the tab you want.
.Menu Operations in This Manual
Menu operations are represented in this manual as shown below. The following 
operation is the same as the one described under “Example Menu Screen Operation” 
on page 80.
Items
Example:
When “Self-timer” is 
selected on the “REC” tab
Tabs
Procedure
[r] (REC)  *  [MENU]  *  REC Tab  *  Self-timer
Use [4] and [6] to select the “REC” tab.
Use [
8] and [2] to select “Self-timer” and 
then press [6]. Press 
[MENU]. Press 
[r] (REC).
Downloaded From camera-usermanual.com Casio Manuals 
						

							
82Advanced Settings
Procedure
[r ] (REC)  * [MENU]  * REC Tab  * Focus
*1
The focus range is the distance from the lens surface.*2The minimum changes along with the optical zoom setting.
REC Mode Settings (REC)
Selecting a Focus Mode (Focus)
SettingsType of ShotFocus ModeApproximate Focus Range*1
SnapshotMoviesSnapshotMovies
Q  Auto 
Focus General 
recording
Automatic
Fixed focal 
point Approximately 
40 cm to 
9 
(infinity) (1.3 
to 9 )
Fixed 
distance
*2, *3
´  
Macro Close ups Automatic Approximately 
3 cm to 50 cm 
(1.2 to 19.7)
E
 Pan 
Focus Shooting with a 
relatively wide 
focus range Fixed 
focal point Fixed distance*2
)
 
Infinity Scenery and 
other distant 
subjects
Fixed Infinity
W  
Manual 
Focus When you want 
to focus 
manually
Manual
Approximately 3 cm to 
9
 (infinity)
*2 (1.2 to 9)
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							
83Advanced Settings
*3(m)
NOTE
• Above values are for reference only.For movie macro, the focus range is a few centimeters within the center distance.
NormalMacro
Zoom StepsClose UpTelephotoCenter Distance
Z1 (Wide) Approx. 0.65 (2.1) 35.00 (114.8) 0.25 (9.8) 2 Approx. 0.85 (2.8) 90.30 (11.8)
3 Approx. 1.10 (3.6) 90.35 (13.8)
4 Approx. 1.50 (4.9) 90.40 (15.7)
5 Approx. 2.00 (6.6) 90.45 (17.7)
6 Approx. 2.70 (8.9) 90.55 (21.7)
7 Approx. 3.50 (11.5) 90.60 (23.6)
8 Approx. 4.50 (14.8) 90.70 (27.6)
9 Approx. 6.00 (19.7) 90.85 (33.5)
10 Approx. 7.50 (24.6) 90.95 (37.4)
11 (Tele) Approx. 9.50 (31.2) 91.00 (39.4)
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							84Advanced Settings
To focus with manual focus
1.On the monitor screen, compose the image so 
the subject you want to focus on is within the 
yellow boundary.
2.Watching the image on the monitor screen use 
[4] and [6] to adjust focus.
• At this time the image that is within the boundary 
will enlarge and fill the monitor screen, which aids 
in focusing. If you do not perform any operation for 
two seconds while the enlarged image is displayed, 
the screen in step 1 will re-appear.
NOTE
• An Auto Macro feature detects how far the subject is from the lens and 
automatically selects either Macro Focus or Auto Focus accordingly.
• Use of the flash together with Macro Focus can cause the light of the flash to 
become blocked, which may result in unwanted lens shadows in your image.
• Auto Macro can be used when recording snapshots only.
• Whenever you perform an optical zoom operation while shooting with Auto Focus, 
Macro Focus, or Manual Focus, a value will appear on the monitor screen to tell 
you the focus range, as shown below.
Example: oo cm to 9
*oo is the actual focusing range value.
• The operations assigned to the [4] and [6] keys with the “L/R Key” setting (page 
92) are disabled while Manual Focus is selected as the focus mode.
• Focus mode selection is disabled while face detection is turned on.
Yellow boundary
Downloaded From camera-usermanual.com Casio Manuals 
						

							85Advanced Settings
Using Focus Lock
“Focus lock” is a technique you can use when you want to 
compose an image in which the subject you want to focus 
on is not within the focus frame in the center of the 
screen.
• To use focus lock, select “
U Spot” or “O Tracking” for 
the Auto Focus area (page 88).
1.Align the monitor screen’s focus frame with 
the subject you want to focus on and then half-
press the shutter button.
2.Keeping the shutter button half-pressed 
(which maintains the focus setting), move the 
camera to compose the image.
• When “O Tracking” is selected as the Auto Focus 
area, the focus frame will move automatically and 
follow the subject.
3.When you are ready to shoot the image, press the shutter button the 
rest of the way down.
NOTE
• Focus lock also locks exposure (AE).
Subject to be focused on
Focus frame
Downloaded From camera-usermanual.com Casio Manuals 
						

							86Advanced Settings
Procedure
[r] (REC) *[MENU] * REC Tab * Self-timer
With the Self-timer, pressing the shutter button starts a timer. The shutter is released 
and the image is shot after a fixed amount of time.
• The front lamp flashes while the Self-timer countdown is in 
progress.
• You can interrupt an ongoing Self-timer countdown by 
pressing [SET].
NOTE
• The Self-timer cannot be used together with the following features.
Lag Correction (when shooting single shots), High Speed CS with Prerecord CS, 
Prerecord (Movie), Move Out CS, Move In CS, Multi-motion Image, Slow Motion 
View
• The Triple Self-timer cannot be used together with the following features.
High Speed CS, Normal Speed CS, Movie, some BEST SHOT scenes (High 
Speed Best Selection, For YouTube)
Using the Self-timer (Self-timer)
 10 sec10-second Self-timer
 2 sec2-second Self-timer
• When shooting under conditions that slow down the shutter speed, 
you can use this setting to prevent image blur due to camera 
movement.
 X3 
(Triple 
Self-timer)Shoots three images: one image 10 seconds after the shutter button 
is pressed, and the next two images as soon as the camera is ready 
after shooting the previous image. How long it takes for the camera to 
get ready to shoot depends on the image size and quality settings, 
whether or not a memory card is loaded in the camera, and the flash 
charge condition.
OffSelf-timer is disabled.
„
‚
”
Front lamp
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							87Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Anti Shake
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject 
movement or camera movement when shooting a moving subject using telephoto, 
when shooting a fast-moving subject, or when shooting under dim lighting conditions.
NOTE
•“A
 Camera AS” only can be selected while recording with High Definition (HD) 
and Standard (STD) movie.
• The ISO sensitivity setting (page 38) must be “AUTO” for “S Image AS” to work.
• Anti Shake is not supported while recording with High Speed Movie.
• Shooting while “D Auto” or “S Image AS” is selected can cause an image to 
appear somewhat coarser than normal and can cause slight deterioration of image 
resolution.
• Anti Shake may not be able to eliminate the effects of camera or subject movement 
when movement is severe.
•“A
 Camera AS” may not work properly when the camera is mounted on a tripod. 
Either turn off Anti Shake or select “S Image AS”.
Reducing the Effects of Camera and Subject Movement 
(Anti Shake)
 AutoMinimizes the effects of camera and subject movement
 Camera ASMinimizes the effects of camera movement only
 Image ASMinimizes the effects of subject movement only
 DEMOHalf-pressing the shutter button demonstrates the effect of “A
 
Camera AS”. However, the image is not recorded.
OffTurns off all Anti Shake settings
D
A
S
F
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							88Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * AF Area
You can use the following procedure to change the Auto Focus metering area for 
shooting snapshots.
• When recording movies, the AF metering area is always “
U Spot”.
•
“O Tracking” cannot be used in combination with the following features.
Prerecord CS, some BEST SHOT scenes (Move Out CS, Move In CS, Multi-motion 
Image, For YouTube, Prerecord (Movie)), Lag Correction
•“— Free” cannot be selected for the AF area while Face Detection is enabled.
Specifying the Auto Focus Area (AF Area)
 SpotThis mode takes readings of a small area in the center of the image. 
This setting works well with focus lock (page 85).
 FreeYou can move the focus frame by using [8], [2], [4], and [6] to move 
the focus point and then pressing [SET]. To change the focus point 
position, select “— Free” again and then use [8], [2], [4] and [6] to 
select the position you want.
 
TrackingWhen you half-press the shutter button while this setting is selected, the 
focus frame will follow the movement of the subject.
U
—
O

						

							89Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * AF Assist Light
Half-pressing the shutter button while this setting is selected 
causes the front lamp to light, which provides illumination for 
focusing in areas where lighting is dim. Leaving this function 
turned off is recommended when shoot portraits from short 
distances, etc.
IMPORTANT!
• Never look directly into the front lamp while it is lit.
• Make sure your finger is not covering the front lamp.
Procedure
[r] (REC) * [MENU] * REC Tab * Face Detection
When shooting people, the face detection feature detects the faces of up to ten 
individuals and adjusts focus and brightness accordingly.
1.Use [4] and [6] to select “On” and then press [SET].
2.Point the camera at the subject (s).
The camera will detect human faces and display a 
frame around each one.
3.Half-press the shutter button.
The camera will focus and the frames around the 
faces it focuses on will turn green.
4.Press the shutter button the rest of the way 
down.
Using the Auto Focus Assist Light (AF Assist Light)
Shooting with Face Detection (Face Detection)
Front lamp
Face Detection icon
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							90Advanced Settings
Tips for Best Face Detection Results
• The camera performs center focus if it cannot detect a face.
• Always make sure that Auto Focus (AF) is selected as the focus mode when 
shooting with face detection.
• Detection of the following types of faces is not supported.
– A face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade
– A profile or a face that is at an angle
– A face that is very far away and small, or very close and large
– A face in an area that is very dark
– A face of a pet or some other non-human subject
IMPORTANT!
• Face detection cannot be used in combination with any of the following features.
– Lag Correction (when shooting single shots)
– Some BEST SHOT scenes (Move Out CS, Move In CS, Multi-motion Image, For 
YouTube, Prerecord (Movie))
– Movie Mode
– High Speed CS with Prerecord CS
• Focus mode selection on the menu is disabled while face detection is turned on.
Downloaded From camera-usermanual.com Casio Manuals