Casio Exilim High Speed Ex Fc100 Users Guide

71Using BEST SHOT
When you press the shutter button while High Speed Anti Shake is enabled, the 
camera records multiple images and automatically combines them in a way that 
produces a final image with minimal blur. You can shoot with this feature to minimize 
the effects of camera movement when shooting with optical anti shake does not 
produce the desired results.
1.Press [BS] and then select “High Speed Anti Shake”.
2.When you are ready to shoot, press the shutter button.
• After you press the...

72Using BEST SHOT
Multi-motion image can be used to isolate a moving subject 
within a series of multiple images and place them against a 
stationary background. Use a tripod or some other means 
to make sure that the camera is not moving or shaking 
when shooting with Multi-motion image.
1.Press [BS] and then select “Multi-motion Image”.
2.Hold down the shutter button to record.
3.Release the shutter button.
Continuous Shutter shooting will stop and the resulting composite image will 
appear on the...

73Using BEST SHOT
NOTE
• This BEST SHOT scene saves only a single final image.
• To cancel this BEST SHOT scene and enter the Continuous Shutter mode, press 
Ç (Continuous Shutter).
• Shooting with this BEST SHOT scene makes the shooting range narrower than 
normal.
• Shooting with “Multi-motion Image” assumes that the subject is moving and 
changing positions. Trying to use it to shoot a subject that is moving while 
maintaining the same location (such as a golf swing, a baseball swing, etc.) will...

74Using BEST SHOT
With High Speed Best Selection, the camera automatically shoots a series of images, 
and selects the best one based on facial image blur, and facial expression (whether 
the subject is smiling or blinking).
1.Press [BS] and then select the “High Speed Best Selection” scene.
2.Press the shutter button to shoot.
• This will cause the message “Busy... Please wait...” to appear. Do not move 
the camera while this message is displayed. The recording process takes 
some time to complete after...

75Using BEST SHOT
You can use these features to shoot an image automatically whenever the subject 
moves into or moves out of a frame on the monitor screen. You also can configure the 
camera to record images of what happened immediately before and after the subject 
moves.
.To setup the camera
1.Press [BS] and then select “Move Out CS” or “Move In CS”.
2.Press [SET].
3.Configure the boundary location and size 
settings.
4.Press [SET].
• If you want to reconfigure the settings, start again 
from step 2....

76Using BEST SHOT
7.Use [4] and [6] to select the continuous 
shutter (CS) speed you want and then press 
[SET].
8.Use [8] and [2] to select the sixth control panel 
option from the top (Max CS shots).
9.Use [4] and [6] to select the maximum number of shots for each 
continuous shutter operation and then press [SET].
10.Use [8] and [2] to select the seventh control panel option from the top 
(Prerecord CS shots).
11.Use [4] and [6] to specify how many of the 30 images and for how 
long images should be...

77Using BEST SHOT
13.Use [8] and [2] to select the second control panel option from the 
bottom (Trigger Sense).
14.Use [4] and [6] to select the subject movement sensitivity, and then 
press [SET].
• You can select any one of three sensitivity levels: “High”, “Normal”, or “Low”.
• Move Out CS Setting Guide
• Move In CS Setting Guide
.To shoot using Move Out CS
1.Compose the image so the subject is within the boundary on the 
monitor screen.
2.Half-press the shutter button.
• The camera will adjust...

78Using BEST SHOT
4.Image recording will continue until the end of the recording time is 
reached.
• While the camera is in Move Out CS recording standby, you can cancel 
standby by pressing the shutter button all the way down. You then will be able 
to shoot images normally.
• To stop an ongoing real-time recording operation, press [SET].
5.Save the CS images (page 55).
.To shoot using Move In CS
1.Compose the image at a location where you expect the subject to enter 
the boundary on the monitor...

79Using BEST SHOT
4.Image recording will continue until the end of the recording time is 
reached.
• While the camera is in Move In CS recording standby, you can cancel standby 
by pressing the shutter button all the way down. You then will be able to shoot 
images normally.
• To stop an ongoing real-time recording operation, press [SET].
5.Save the CS images (page 55).
NOTE
• Compose the image so the entire subject and its background are within the 
boundary. Recording may not be performed correctly if...

80Advanced Settings
Advanced Settings
The following are menu operations you can use to configure various camera settings.
.Example Menu Screen Operation
Press [MENU] to display the menu screen.
• Menu contents are different in the REC mode and PLAY mode.
Menu Screen Operation Buttons
1.In the REC mode, press [MENU].
This will display the menu screen.
2.Use [4] and [6] to select the tab where the item you want to configure 
is located.
Using On-screen Menus
[4] [6]Selects tabs. [6] is also used to display...