Casio Exilim EX Z50 User Manual

OTHER SETTINGS
141
Using World Time
You can use the World Time screen to select a time zone
and instantly change the time setting of the camera’s clock
when you go on a trip, etc. World Time lets you select one
of 162 cities in 32 time zones.
To display the World Time screen
1.Press [MENU].
2.Select the “Set Up” tab, select “World Time”,
and then press [].
3.Use [] and [] to select “World”.
Select this:
Home
World
To do this:
Display the time in your home time zone
Display the time in the zone...

OTHER SETTINGS
142
5.Use [], [], [
], and
[] to select the
geographical area you
want, and then press
[SET].
6.Use [] and [] to select the city you want,
and then press [SET].
7.When the setting is the way you want, press
[SET] to apply it and exit the setting screen.
Changing the Display Language
You can use the following procedure to select one of ten
languages as the display language.
1.Press [MENU].
2.Select the “Set Up” tab, select “Language”,
and then press [].
3.Use [], [], [
], and [] to...

OTHER SETTINGS
143
Changing the USB Port Protocol
You can use the procedure below to change the
communication protocol of the camera’s USB port when
connecting to a computer, printer, or other external device.
Select the protocol that suits the device to which you are
connecting.
1.Press [MENU].
2.Select the “Set Up” tab, select “USB”, and
then press [].
3.Use [] and [] to select the setting you
want, and then press [SET].
Select this setting:
Mass Storage (USB
DIRECT-PRINT)
PTP (PictBridge)* When...

OTHER SETTINGS
144
Configuring [] (REC) and [] (PLAY)
Power On/Off Functions
You can use the following procedures to configure the []
(REC) and [] (PLAY) so power turns and/or off
whenever they are pressed.
1.Press [MENU].
2.Select the “Set Up” tab, select “REC/PLAY”,
and then press [].
3.Use [] and [] to select the setting you
want, and then press [SET].
Select this setting:
Power On
Power On/Off
Disable
To configure this operation:
Power turns on when [
] (REC)  or
[] (PLAY) is pressed (but does...

OTHER SETTINGS
145
Formatting Built-in Memory
Formatting built-in memory deletes any data stored in it.
 IMPORTANT! 
•Note that data deleted by a format operation cannot
be recovered. Check to make sure you do not need
any of the data in memory before you format it.
•Formatting built-in memory deletes the following.
—Protected images
—FAVORITE folder images
—BESTSHOT mode user setups
—Startup screen image
—Power down image
1.Check to make sure there is no memory card
loaded in the camera.
•If there is a...

USING A MEMORY CARD
146
USING A MEMORY CARD
You can expand the storage
capabilities of your camera by using
a commercially available memory
card (SD memory card or
MultiMediaCard). You can also
copy files from built-in flash
memory to a memory card and from
a memory card to flash memory.
•Normally, files are stored in built-in flash memory. When
you insert a memory card, however, the camera
automatically stores files to the card.
•Note that you cannot save files to built-in memory while a
memory card is...

USING A MEMORY CARD
147
2.Positioning the memory
card so its back is facing in
the same direction as the
camera’s monitor screen,
carefully slide it into the
card slot. Slide the card all
the way in until you hear it
click securely into place.
3.Swing the battery cover
closed, and then slide it in
the direction indicated by
the arrow.
Using a Memory Card
 IMPORTANT! 
•Make sure you turn off the camera before inserting or
removing a memory card.
•Be sure to orient the card correctly when inserting it....

USING A MEMORY CARD
148
Formatting a Memory Card
Formatting a memory card deletes any data already stored
on it.
 IMPORTANT! 
•Be sure to use the camera to format a memory card.
Formatting a memory card on a computer and then
using it in the camera can slow down data
processing by the camera. In the case of an SD card,
formatting on a computer can result in non-
conformity with the SD format, causing problems with
compatibility, operation, etc.
•Note that data deleted by a memory card format
operation...

USING A MEMORY CARD
149

 Memory Card Precautions
•If a memory card starts to behave abnormally, you can
restore normal operation by reformatting it. However, we
recommend that you always take along more than one
memory card whenever using the camera far away from
the home or office.
•We recommend that you format a memory card before
using it for the first time after purchasing it, or whenever
the card you are using seems to be the cause of
abnormal images.
•As you record data to and delete data from an...

USING A MEMORY CARD
150
4.Use [] and [] to select “Built-in  Card”,
and then press [SET].
•This starts the copy operation and displays the
message “Busy.... Please wait...”.
•After the copy operation is complete, the monitor
screen shows the last file in the folder.
Copying Files
Use the procedures below to copy files between built-in
memory and a memory card.
 IMPORTANT! 
•Only snapshot, movie files, audio snapshot, and
voice recording files recorded with this camera can
be copied. Other files cannot...