Casio Exilim EX Z50 User Manual

121
PLAYBACK
Using Image Roulette
Image Roulette cycles images like a slot machine on the
display, before stopping at one of them. The image that
finally appears is random.
1.While the camera is turned off, hold down [
]
as you press [
] (PLAY) to turn it on.
•Keep [
] held down until images appear on the
monitor screen.
•This starts the Image Roulette operation, scrolling
images on the display, finally stopping at one.
2.Press [
] or [] to restart the Image Roulette
operation.
3.To turn off Image...

122
PLAYBACK
Adding Audio to a Snapshot
The “after-recording” feature lets you add audio to
snapshots after they are recorded. You can also re-record
the audio of an audio snapshot (one with a 
 icon on it).
•Audio Format: WAVE/ADPCM recording format
This is the Windows standard format for audio recording.
The file extension of a WAVE/ADPCM file is “.WAV”.
•Recording Time:
Up to about 30 seconds per image
•Audio File Size:
Approximately 120KB (30-second recording of
approximately 4KB per second)
1.In the...

123
PLAYBACK
To re-record audio
1.In the PLAY mode, use [
] and [] to scroll
through snapshots until the one whose audio
you want to re-record is displayed.
2.Press [MENU].
3.Select the “PLAY” tab, select “Dubbing”, and
then press [].
4.Use [] and [] to select “Delete”, and then
press [SET].
•If you merely want to delete the audio without re-
recording, press [MENU] here to complete the
procedure.
5.Press the shutter button to start audio
recording.
6.Recording stops after about 30 seconds or
when...

124
PLAYBACK
Playing Back a Voice Recording File
Perform the following steps to play back a voice recording
file.
1.In the PLAY mode, use [
] and [] to display
the voice recording file (a file with 
 on it)
you want to play.
2.Press [SET].
•This starts playback of
the voice recording file
through the camera’s
speaker.
•You can perform the
following operations
while audio is playing.
To do this:
Fast forward or fast reverse
the audio
Pause and unpause audio
playback
Adjust audio volume
Cancel playback
Do...

DELETING FILES
125
DELETING FILES
You can delete a single file, or you can delete all files
currently in memory.
 IMPORTANT! 
•Note that file deletion cannot be undone. Once you
delete a file, it is gone. Make sure you really do not
need a file anymore before you delete it. Especially
when deleting all files, make sure you check all the
files you have stored before proceeding.
•A protected file cannot be deleted. To delete a
protected file, unprotect it first (page 128).
•Delete cannot be performed when...

DELETING FILES
126
Deleting All Files
1.In the PLAY mode, press [] ( ).
2.Use [] and [] to select “All Files Delete”,
and then press [SET].
3.Use [] and [] to select “Yes”.
•To exit the file delete operation without deleting
anything, select “No”.
4.Press [SET] to delete all the files.
•The message “There are no files.” appears on the
screen after all of the files are deleted.
Downloaded From camera-usermanual.com Casio Manuals 

FILE MANAGEMENT
127
FILE MANAGEMENT
The file management capabilities of the camera make it
easy to keep track of images. You can protect files against
deletion and store the files you want in the camera’s built-in
memory.
Folders
Your camera automatically creates folders in its built-in
flash memory or on the memory card.
Memory Folders and Files
An image you record is automatically stored in a folder,
whose name is a serial number. You can have up to 900
folders in memory at the same time. Folder names...

FILE MANAGEMENT
128
4.Use [] and [] to
select “On”, and then
press [SET].
•A file that is protected is
indicated by the 
mark.
•To unprotect a file, select
“Off” in step 4, and then
press [SET].
5.Press [MENU] to exit the menu screen.
Protecting Files
Once you protect a file it cannot be deleted (page 125).
You can protect files individually or you can protect all files
in memory with a single operation.
To protect a single file
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab,
select...

FILE MANAGEMENT
129
To protect all files in memory
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Protect”, and
then press [].
3.Use [] and [] to select “All Files : On”, and
then press [SET].
•To unprotect all files, press [SET] in step 3 so the
setting shows “All Files : Off”.
4.Press [MENU] to exit the menu screen.
Using the FAVORITE Folder
You can copy scenery shots, photos of your family, or other
special images from a file storage folder (page 173) to the
FAVORITE folder in...

FILE MANAGEMENT
130
3.Use [] and [] to
select “Save”, and
then press [SET].
•This displays the names
of the files in built-in
memory or on the loaded
memory card.
4.Use [
] and [] to select the file you want to
copy to the FAVORITE folder.
5.Use [] and [] to select “Save”, and then
press [SET].
•This copies the displayed file to the FAVORITE
folder.
6.After copying all of the files you want, use []
and [] to select “Cancel”, and then press
[SET] to exit.
 NOTE 
•Copying an image file with the...