Casio Exilim EX Z50 User Manual

101
OTHER RECORDING FUNCTIONS
Specifying Color Saturation
Use the following procedure to control the intensity of the
image you are recording.
1.In a REC mode, press [MENU].
2.Select the “REC” tab, select “Saturation”, and
then press [].
3.Use [] and [] to select the setting you
want, and then press [SET].
To get this:
High color saturation (intensity)
Normal color saturation (intensity)
Low color saturation (intensity)
Select this setting:
+2
+1
0
–1
–2
Specifying Outline Sharpness
Use the following...

102
OTHER RECORDING FUNCTIONS
Turning the On-screen Grid On and Off
You can display gridlines on the monitor screen to help you
compose images and ensure that the camera is straight
when recording.
To do this:
Display the grid
Hide the grid
Select this setting:
On
Off
1.In a REC mode, press [MENU].
2.Select the “REC” tab, select “Grid”, and then
press [].
3.Use [] and [] to select the setting you
want, and then press [SET].
Specifying Contrast
Use this procedure to adjust the relative difference...

103
OTHER RECORDING FUNCTIONS
Using Icon Help
Icon Help displays guidance text about an icon when you
select it on the monitor screen while in a REC mode.
•Icon Help text is displayed for the following functions:
Flash mode, focus mode, white balance, self-timer,
current REC mode.
Note, however, that current REC mode, white balance
and self-timer Icon Help text appears only when “REC
Mode” “White Balance” or “Self-timer” is assigned to the
[
] and [] keys with the key customization feature (page
104)....

104
OTHER RECORDING FUNCTIONS
Assigning Functions to the [
] and []
Keys
A “key customization” feature lets you configure the [
]
and [] keys so they change camera settings whenever
they are pressed in a REC mode. After you configure the
[
] and [] keys, you can change the setting assigned to
them without going through the menu screen.
1.In a REC mode, press [MENU].
2.Select the “REC” tab, select “L/R Key”, and
then press [].
3.Use [] and [] to select the setting you
want, and then press [SET]....

105
OTHER RECORDING FUNCTIONS
Specifying Power On Default Settings
The camera’s “mode memory” feature lets you specify the
power on default settings individually for the recording
mode, flash mode, focus mode, white balance mode, ISO
sensitivity, AF Area, self-timer, flash intensity, digital zoom
mode, manual focus position and zoom position. Turning
on mode memory for a mode tells the camera to remember
the status of that mode when you turn off the camera, and
restore it the next time you turn the...

106
OTHER RECORDING FUNCTIONS
1.In a REC mode, press [MENU].
2.Use [
] and [] to select the “Memory” tab.
3.Use [] and [] to select the item you want to
change, and then press [].
4.Use [] and [] to select the setting you
want, and then press [SET].
To do this:
Turn on mode memory so settings
are restored at power on
Turn off mode memory so settings
are initialized at power on
Select this setting:
On
Off
 IMPORTANT! 
•Note that BESTSHOT mode settings take priority
over mode memory settings. If you...

107
OTHER RECORDING FUNCTIONS
Resetting the Camera
Use the following procedure to reset all of the camera’s
settings to their initial defaults as shown under “Menu
Reference” on page 192.
1.Press [MENU].
2.Select the “Set Up” tab, select “Reset”, and
then press [].
3.Use [] and [] to select “Reset”, and then
press [SET].
•To cancel the procedure without resetting, select
“Cancel” and press [SET].
Downloaded From camera-usermanual.com Casio Manuals 

108
PLAYBACKPLAYBACK
2.Use [] (forward) or [
] (back) to scroll
through files on the monitor screen.
 NOTE 
•Holding down [
] or [] scrolls images at high
speed.
•In order to allow for faster playback image scrolling,
the image that initially appears on the monitor screen
is a preview image, which is of somewhat lower
quality than the actual display image. The actual
display image appears a short while after the preview
image. This does not apply to images copied from
another digital camera.
You can...

109
PLAYBACK
Playing an Audio Snapshot
Perform the steps below to display an audio snapshot
(indicated by ) and play its audio.
1.In the PLAY mode, use [
] and [] until the
image you want is displayed.
2.Press [SET].
•This plays back the
audio that accompanies
the displayed image.
•You can perform the
following operations
while audio is playing.
 IMPORTANT! 
•Audio volume can be adjusted only when playback is
being performed or is paused.
To do this:
Fast forward or fast reverse
the audio
Pause and...

110
PLAYBACK
[SET]
Shutter button
Flipping the Display
The following procedure flips the image 180 degrees. This
comes in handy when you want to show someone standing
in front of you an image on the monitor screen.
1.In the PLAY mode, use [
] and [] to scroll
through images on the monitor screen and
display the one you want.
2.While holding down the shutter button, press
[SET].
•This flips the image 180 degrees. The histogram or
any other display information you had displayed is
cleared automatically...