Casio Exilim Ex Z5 Users Guide

PLAYBACK
141
Playing a Slideshow
A slideshow automatically plays back images in sequence
at a fixed interval.
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Slideshow”,
and then press [].
•The file displayed on the calendar for each date is
the first file that was recorded on that date.
•To exit the calendar screen, press [MENU] or [BS].
•On the calendar screen, 
 indicates a voice
recording file (page 147).
•
 appears in place of the image when the date
contains data that cannot be...

PLAYBACK
142
4.Use [
] and [] to select “Start”, and then
press [SET].
•This starts the slideshow.
5.To stop the slideshow, press [SET].
•The slideshow will also stop automatically after the
amount of time you specified for “Time” elapses.
Effect
•Pattern 1, 2, 3, 4
Applies a preset effect when transitioning from
one image to another.
•Random
Randomly applies the preset patterns (1, 2, 3,
and 4).
•OFF
Effects turned off.3.Use the screen that appears to configure the
image, time, interval, and effect...

PLAYBACK
143
•Note that effect settings are disabled when the
slideshow “Images” setting is “Favorites” or “
Only”, or when the slideshow “Interval” setting is
“MAX”, “1 sec”, or “2 sec”.
•Images copied from another digital camera or a
computer may take longer time to appear than the
slideshow interval time you specify.
•If there are indicators on the display, you can clear
them by pressing [
] (DISP) (page 29).
•When the slideshow reaches a movie while “One
Image” is selected for “Images”, the movie...

PLAYBACK
144
4.Use [
] and [] to
select “Rotate”, and
then press [SET].
•Each press of [SET]
rotates the image 90
degrees.
5.After you are finished configuring settings,
press [MENU] to exit the setting screen.
Rotating the Display Image
Use the following procedure to rotate the image 90 degrees
and register the rotation information along with the image.
After you do this, the image is always displayed in its
rotated orientation.
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select...

PLAYBACK
145
Adding Audio to a Snapshot
The “after-recording” feature lets you add audio to
snapshots after they are recorded. You can also re-record
the audio of an audio snapshot (one with a 
 icon on it).
•Audio Format: WAVE/ADPCM recording format
This is the Windows standard format for audio recording.
The file extension of a WAVE/ADPCM file is “.WAV”.
•Recording Time:
Up to about 30 seconds per image
•Audio File Size:
Approximately 165KB (30-second recording of
approximately 5.5KB per second)...

PLAYBACK
146
To re-record audio
1.In the PLAY mode, use [] and [] to scroll
through snapshots until the one whose audio
you want to re-record is displayed.
2.Press [MENU].
3.Select the “PLAY” tab, select “Dubbing”, and
then press [].
4.Use [
] and [] to select “Delete”, and then
press [SET].
•If you merely want to delete the audio without re-
recording, press [MENU] here to complete the
procedure.
5.Press the shutter button to start audio
recording.
6.Recording stops after about 30 seconds or
when...

PLAYBACK
147
 IMPORTANT! 
•Take care that you do
not block the
microphone with your
fingers.
•Good recording results
are not possible when
the camera is too far
from the subject.
•The 
 (Audio) icon appears on the monitor screen
after audio recording is complete.
•You will not be able to record audio when remaining
memory capacity is low.
•You cannot add audio to the following types of
images.
—Movie images
—Images created with MOTION PRINT
—Protected snapshot (page 155)
•Audio that is re-recorded or...

PLAYBACK
148
Displaying Camera Images on a TV Screen
You can display recorded images on a TV screen and even
use a TV screen to compose images before you record
them. To display camera images on a TV, you need a
television equipped with a video input terminal.
1.Connect one end of the AV cable that comes
with the camera to the camera’s USB/AV
connector, and the other end to the video
input terminal of the TV.
 IMPORTANT! 
• Audio volume can be adjusted only when playback is
being performed or is paused....

PLAYBACK
149
2.Turn on the TV and select its video input
mode.
3.Press [] or [] to turn on the camera, and
then perform the required operation for
playback or recording.
 IMPORTANT! 
•Make sure that “Power On” or “Power On/Off” is
selected for the camera’s power on/off functions
(page 169) when you connect to a TV to view
images.
•All icons and indicators that appear on the monitor
screen also appear on the TV screen.
•Note that the audio output is monaural.
•Depending on the size of the TV screen,...

PLAYBACK
150
 NOTE 
•You can connect the camera to a DVD recorder or
video deck to record images from the camera.
Simply connect the AV cable that comes with the
camera to the video input and audio input jacks of
your DVD recorder or video deck instead of to your
TV.
—After connecting, you can play a slideshow of
snapshots and movies on the camera and record
them onto a DVD or video tape. You can record
movies by selecting “
 Only” for the slideshow
“Images” setting (page 141).
—When recording images to...