Casio Exilim Ex Z5 Users Guide

PLAYBACK
131
Using Color Restoration to Correct the
Color of an Old Photograph
Color restoration let you correct the old color of a
photograph shot with a digital camera. This function is
useful for correcting existing old photographs, posters, etc.
•Performing color restoration on an image causes a new
(restored) version (2M (1600 ×
 1200 pixels)) to be stored
as a separate file.
1.In the PLAY mode, use [] and [] to scroll
through images on the monitor screen and
display the one you want to correct....

PLAYBACK
132
 IMPORTANT! 
•If the original image is smaller than 2M (1600 ×
 1200
pixels), the new (restored) version is the same size
as the original one.
•Note that you cannot correct the following types of
images.
—Movie images and the voice recording file icon
—Images created with MOTION PRINT
—Images recorded with another camera
•The color correct operation cannot be performed if
there is not enough memory to store the corrected
image.
•When you display a restored image on the camera’s
monitor...

PLAYBACK
133
To do this:
Fast forward or fast reverse
playback
•Each press increases the speed
one more step.
Return fast forward or fast
reverse movie playback to normal
speed
Pause movie playback
Scroll paused playback one
frame
Stop movie playback
Adjust the movie audio volume
level
Toggle monitor screen indicators
on and off
Zoom the movie image
Scroll a zoomed movie image on
the monitor screen
Do this:
Press [] or [].
Press [SET].
Press [SET].
Press [] or [].
Press [MENU].
Press [] and then...

PLAYBACK
134
Editing a Movie
Use the procedure in this section to edit and delete movies.
Editing operations let you cut everything before or after a
specific frame, or to cut everything between two frames.
 IMPORTANT! 
•Cut operations cannot be undone. Make sure you
really want to cut the part of the movie you are
specifying before executing the cut operation.
•Movie editing is not possible for movies not recorded
with this camera.
•A movie that is shorter than five seconds cannot be
edited.
•Certain...

PLAYBACK
135
To do this:
Fast forward or fast reverse
playback
Pause or unpause movie
playback
Scroll paused playback one
frame
Cancel the cut operation
Do this:
Press [] or [].
Press [SET].
Press [] or [].
Press [MENU].
4.Display the frame where you want the cut to
be located.
•The red portion of the
indicator bar shows
what part will be cut.
To do this:
Cut everything before a
specific frame
Cut everything after a specific
frame
Exit the cut mode
Select this setting:
 Cut
 Cut
Cancel

To cut...

PLAYBACK
136

To cut everything between two specific
frames
1.While the movie is
playing, press [SET].
•This will pause movie
playback.
2.Press [].
•You can also display the same screen while in the
PLAY mode, by pressing [MENU], selecting the
“PLAY” tab, selecting “Movie Editing”, and then
pressing [].
3.Use [
] and [] to select “ Cut”, and
then press [SET].
•Select “Cancel” to exit the cut mode.
5.When the frame you
want is displayed,
press [].
6.Use [
] and [] to select “Yes,” and then
press...

PLAYBACK
137
6.Referring to step 4,
search for the cut end
screen. When the cut
end screen is
displayed, press [].
•The red portion of the
indicator bar shows what
part will be cut.
7.Use [
] and [] to select “Yes”, and then
press [SET].
•The message “Busy.... Please wait...” will remain on
the display as the cut operation is performed. Cutting
is complete when the message disappears.
•Select “No” to exit the cut mode.
4.Display the starting frame where you want the
first cut to be located.
5.When the...

PLAYBACK
138

To capture a still image from a movie
1.In the PLAY mode, use [] and [] to scroll
through movies on the monitor screen and
display the one that contains the frames you
want.
2.Press [MENU].
3.Select the “PLAY” tab, select “MOTION
PRINT”, and then press [].
4.Use [
] and [] to
select the layout (“1
frame” or “9 frames”)
you want to use.
•Select “Cancel” to exit
the MOTION PRINT
mode.
Capturing a Still Image from a Movie
(MOTION PRINT)
The MOTION PRINT feature lets you capture a frame...

PLAYBACK
139
Displaying the 9-image View
The following procedure displays nine images on the
monitor screen at the same time.
1.In the PLAY mode, press the zoom button
(
).
•This displays the 9-image screen. The image that
was last on the display will have a selection
boundary around it.
•If there are fewer than nine images in memory, they
are displayed starting from the upper left corner. The
selection boundary is located at the image that was
on the display before you switched to the 9-image
view.
•For...

PLAYBACK
140
Date selection cursor
Displaying the Calendar Screen
Use the following procedure to display a 1-month calendar.
Each day shows the first file recorded on that day, which
makes it easy to find the file you want.
1.In the PLAY mode,
press the zoom button
(
) twice.
•You can also display
the calendar by
pressing [MENU],
selecting the “PLAY”
tab, selecting
“Calendar”, and then
pressing [] to display
the calendar.
•Use the procedure
under “Changing the
Date Format” on page
164 to specify the...