Casio Exilim EX Z30 User Manual

OTHER SETTINGS
131
To configure summer time (DST)
settings
1.In the REC mode or the PLAY mode, press
[MENU].
2.Select the “Set Up” tab, select “World Time”,
and then press [].
•This displays the current World Time Settings.
3.Use [] and [] to select “World”, and then
press [].
•If you want to configure Home Time settings, select
“Home” instead.
4.Use [] and [] to select “DST”, and then
press [].
5.Use [] and [] to select the summer time
(DST) setting you want.
Select this:
On
Off
To do this:...

OTHER SETTINGS
132
Changing the Display Language
You can use the following procedure to select one of ten
language as the display language.
1.In the REC mode or the PLAY mode, press
[MENU].
2.Select the “Set Up” tab, select “Language”,
and then press [].
3.Use [], [], [
], and [] to change the
setting, and then press [SET].
: Japanese
English : English
Français : French
Deutsch : German
Español : Spanish
Italiano : Italian
Português : Portuguese
: Chinese (Complex)
: Chinese (Simplified)
: Korean...

OTHER SETTINGS
133
Configuring [] (REC) and [] (PLAY)
Buttons Power On/Off Functions
You can use the following procedures to configure the []
(REC) and [] (PLAY) buttons so power turns and/or off
whenever they are pressed.
1.In the REC mode or the PLAY mode, press
[MENU].
2.Select the “Set Up” tab, select “REC/PLAY”,
and then press [].
3.Use [] and [] to select the setting you
want, and then press [SET].
•PTP (PictBridge) simplifies the transfer of image data
to the connected device.
•Mass Storage...

OTHER SETTINGS
134
 IMPORTANT! 
•When “Power On/Off” is selected, pressing []
(REC) in the REC mode or [] (PLAY) in the PLAY
mode turns off the camera.
•Pressing [
] (REC) in the PLAY mode switches to
the REC mode, and pressing [] (PLAY) in the
REC mode switches to the PLAY mode.
 NOTE 
•The initial default setting is “Power On”.
Select this setting:
Power On
Power On/Off
Disable
To configure this operation:
Power turns on when [
] (REC)  or
[] (PLAY) is pressed (but does notturn off)
Power turns on or...

OTHER SETTINGS
135
4.Use [] and [] to select “Format”, and then
press [SET].
•To exit the format operation without formatting,
select “Cancel”.
Formatting Built-in Memory
Formatting built-in memory deletes any data stored in it.
 IMPORTANT! 
•Note that data deleted by a format operation cannot
be recovered. Check to make sure you do not need
any of the data in memory before you format it.
•Formatting built-in memory deletes all files, including
files in the FAVORITE folder (page 116), protected
files...

USING A MEMORY CARD
136
USING A MEMORY CARD
You can expand the storage
capabilities of your camera by using
a commercially available memory
card (SD memory card or
MultiMediaCard). You can also
copy files from built-in flash
memory to a memory card and from
a memory card to flash memory.
•Normally, files are stored in built-in flash memory. When
you insert a memory card, however, the camera
automatically stores files to the card.
•Note that you cannot save files to built-in memory while a
memory card is...

USING A MEMORY CARD
137
2.Positioning the memory
card so its back is facing in
the same direction as the
camera’s monitor screen,
carefully slide it into the
card slot.
3.Swing the battery
compartment cover closed,
and then slide it in the
direction indicated by the
arrow.
Using a Memory Card
 IMPORTANT! 
•Make sure you turn off the camera before inserting or
removing a memory card.
•Be sure to orient the card correctly when inserting it.
Never try to force a memory card into the slot when
you feel...

USING A MEMORY CARD
138
Formatting a Memory Card
Formatting a memory card deletes any data already stored
on it.
 IMPORTANT! 
•Be sure to use the camera to format a memory card.
Formatting a memory card on a computer and then
using it in the camera can slow down data
processing by the camera. In the case of an SD card,
formatting on a computer can result in non-
conformity with the SD format, causing problems with
compatibility, operation, etc.
•Note that data deleted by a memory card format
operation...

USING A MEMORY CARD
139
Memory Card Precautions
•If a memory card starts to behave abnormally, you can
restore normal operation by reformatting it. However, we
recommend that you always take along more than one
memory card whenever using the camera far away from
the home or office.
•We recommend that you format a memory card before
using it for the first time after purchasing it, or whenever
the card you are using seems to be the cause of
abnormal images.
•Before starting a format operation, check to...

USING A MEMORY CARD
140
4.Use [] and [] to select “Built-in  Card”,
and then press [SET].
•This starts the copy operation and displays the
message “Busy.... Please wait...”.
•After the copy operation is complete, the monitor
screen shows the last file in the folder.
Copying Files
Use the procedures below to copy files between built-in
memory and a memory card.
 IMPORTANT! 
•Only snapshot, movie files, audio snapshot, and
voice recording files recorded with this camera can
be copied. Other files cannot...