Casio Exilim EX Z30 User Manual

OTHER SETTINGS
121
OTHER SETTINGS
Configuring Sound Settings
You can configure different sounds to play whenever you
turn on the camera, press the shutter release button half-
way or all the way, or perform a key operation.
To configure sound settings
1.In the REC mode or the PLAY mode, press
[MENU].
2.Select the “Set Up” tab, select “Sounds”, and
then press [].
3.Use [] and [] to
select the sound
whose setting you
want to configure, and
then press [].
Select this setting:
Sound 1 through Sound 5...

OTHER SETTINGS
122
To set the volume level
1.In the REC mode or the PLAY mode, press
[MENU].
2.Select the “Set Up” tab, select “Sounds”, and
then press [].
3.Use [] and [] to select “Volume”.
4.Use [
] and [] to specify the volume setting
you want, and then press [SET].
•You can set the volume in the range of 0 (no sound)
to 7 (loudest).
 NOTE 
•The initial default volume setting is 3.
Specifying an Image for the Startup Screen
You can specify an image you recorded as the startup
screen image, which...

OTHER SETTINGS
123
 IMPORTANT! 
• You can select any one of the following types of
image as the startup image.
— The camera’s built-in startup image
— A snapshot you recorded with the camera
— An audio snapshot you recorded with the camera
• The snapshot image that you select as the startup
image is stored in a special memory location called
“startup image memory”. Only one image can be
stored in startup image memory at one time.
Selecting a new startup image overwrites anything
that is already stored in...

OTHER SETTINGS
124
3.Change the name of the file to one of the
following.
Snapshot Image: ENDING.JPG
Movie Image: ENDING.AVI
•Input the following file name only (without file name
extension) if your computer is configured to hide file
name extensions.
File Name: ENDING
•Your camera is now configured to display a power
down image. The power down image will appear any
time you press the power button to turn off the
camera. The power down image appears regardless
of whether or not your camera has a memory...

OTHER SETTINGS
125

 To cancel Power Down Image settings
1.Use the USB cable to connect the camera to
your computer (page 151).
2.Change the name of the current power down
image from ENDING.JPG or ENDING.AVI to
something else, or delete the current power
down image from Flash memory.
Specifying the File Name Serial Number
Generation Method
Use the following procedure to specify the method for
generating the serial number used for file names (page 114).
1.In the REC mode or the PLAY mode, press
[MENU]....

OTHER SETTINGS
126
Using the Alarm
You can configure up to three alarms that cause the
camera to beep and display a specified image at the time
you specify. Specifying a movie or an audio snapshot plays
back the image and the audio at the assigned time.
Specifying a voice recording file plays the audio.
To set an alarm
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Alarm”, and
then press [].
3.Use [] and [] to select the alarm whose
setting you want to configure, and then press...

OTHER SETTINGS
127
Stopping the Alarm
When an alarm time is reached while the camera is turned
off, the alarm will sound for about one minute (or until you
stop it), and then the camera will turn on. To stop the alarm
after it starts to sound, press any button. If the camera is
on the USB cradle when an alarm sounds, you can stop it
by pressing the USB cradle [USB] button or [PHOTO]
button, or any camera button.
 IMPORTANT! 
•Note that the alarm does not sound if the alarm time
is reached when any one of...

OTHER SETTINGS
128
4.Use [] and [] to select “City”, and then
press [].
5.Use [], [], [
], and [] to select the
geographical area that contains location you
want to select as your Home Time zone, and
then press [SET].
6.Use [] and [] to select the city you want,
and then press [SET].
7.After selecting the city you want, press [SET]
to register its zone as your Home Time zone.
To set the current time and date
1.In the REC mode or the PLAY mode, press
[MENU].
2.Select the “Set Up” tab, select...

OTHER SETTINGS
129
Changing the Date Format
You can select from among three different formats for
display of the date.
1.In the REC mode or the PLAY mode, press
[MENU].
2.Select the “Set Up” tab, select “Date Style”,
and then press [].
3.Use [] and [] to change the setting, and
then press [SET].
Example: December 24, 2004
Select this format:
YY/MM/DD
DD/MM/YY
MM/DD/YY
To display the date like this:
04/12/24
24/12/04
12/24/04
Using World Time
You can use the World Time screen to view a time zone
that...

OTHER SETTINGS
130
To configure World Time settings
1.In the REC mode or the PLAY mode, press
[MENU].
2.Select the “Set Up” tab, select “World Time”,
and then press [].
•This displays the current World Time zone.
3.Use [] and [] to select “World”, and then
press [].
4.Use [] and [] to select “City”, and then
press [].
5.Use [], [], [
], and
[] to select the
geographical area you
want, and then press
[SET].
6.Use [] and [] to
select the city you
want, and then press
[SET].
•This displays the...