Casio Exilim EX V8 User Manual

							251USING THE CAMERA WITH A COMPUTER
5.Use your mouse to select the area of the 
screen you want to capture.
Move your mouse pointer to the upper left corner of the area 
you want to capture and then hold down your mouse button. 
Keeping your mouse button depressed, drag the pointer 
down to the right corner of the area and then release the 
mouse button.
6.Follow the instructions that appear on the 
display to transfer a capture of the selected 
area to the camera.
•The image transfer method and detailed image settings 
used depend on the Photo Transport settings. For details, 
see Photo Transport help (page 251).
IMPORTANT!
•The transfer operation converts screen captures to JPEG 
format.
■Photo Transport Setup and Help
Clicking the Settings button will display a dialog box that you can 
use to configure image transfer settings, to specify the transfer 
method, etc. For detailed information about the setup, 
operational procedures, and troubleshooting, click the Help 
button.
Capture area
Downloaded From camera-usermanual.com Casio Manuals 
						

							252USING THE CAMERA WITH A COMPUTER
Viewing User Documentation (PDF Files)
1.
Start up your computer, and place the bundled 
CD-ROM into its CD-ROM drive.
•Use the CD-ROM that has “User’s Guide Included” on its 
label.
•Normally, this should cause the menu screen to appear 
automatically. If your computer does not display the menu 
screen automatically, navigate to the CD-ROM on your 
computer and then double-click the “AutoMenu.exe” file.
2.On the menu screen, click the “Language” 
down arrow button and then select the 
language you want.
3.Click “Manual” to select it and then click the 
name of the application whose manual you 
want to read.
IMPORTANT!
•You must have Adobe Reader or Adobe Acrobat Reader 
installed on your computer in order to view the contents of 
a PDF file. If you do not already have Adobe Reader or 
Adobe Acrobat Reader installed, install Adobe Reader from 
the bundled CD-ROM that has “Adobe Reader” on its label.
User Registration
You can perform user registration over the Internet. To do so, of 
course, you need to be able to connect to the Internet with your 
computer.
1.Click the “Register” button.
•This starts up your Web browser and accesses the user 
registration website. Follow the instructions that appear 
on your computer screen to register.
Exiting the CD-ROM Menu
On the CD-ROM menu, click “Exit”.
Downloaded From camera-usermanual.com Casio Manuals 
						

							253USING THE CAMERA WITH A COMPUTER
Install the required software in accordance with what version of 
the Macintosh OS you are running and what you want to do.
Using the Camera with a Macintosh
ObjectiveOS 
VersionInstall this software:See 
page:
•Viewing images 
on your 
Macintosh
•Storing images 
on your 
MacintoshOS 9/
OS X•USB driver not 
required.254
Transfer of images 
from the camera 
and management of 
images on your 
MacintoshOS 9•Use commercially 
available software.259
OS X•Use iPhoto, which 
comes bundled with 
your operating 
system.–Play moviesOS 9•Movie file playback 
not supported.
259
OS X•Movie file playback 
supported under OS X 
v10.3.9 or higher 
when QuickTime 7 or 
higher is installed.
View the User’s 
GuideOS 9/
OS X•Use Adobe Reader or 
Adobe Acrobat 
Reader, which comes 
bundled with your 
operating system.260
ObjectiveOS 
VersionInstall this software:See 
page:
Downloaded From camera-usermanual.com Casio Manuals 
						

							254USING THE CAMERA WITH A COMPUTER
Viewing and Storing Images on a 
Macintosh
You can view and store images (snapshot and movie files) on 
your Macintosh by connecting to the camera.
IMPORTANT!
•Connection is not supported to a Macintosh running Mac 
OS 8.6 or lower, or Mac OS X 10.0. Connection is 
supported to a Macintosh running Mac OS 9 or OS X (10.1, 
10.2, 10.3, 10.4) only. Use the standard USB driver that 
comes with the operating system for connection.
■Connecting the Camera to Your Computer 
the First Time
1.Connect the bundled AC adaptor to the [DC IN 
5.3V] connector of the USB cradle and then 
plug it in to a household power outlet.
•If you do not plan to use the AC adaptor, make sure that 
the camera’s battery is fully charged.
Downloaded From camera-usermanual.com Casio Manuals 
						

							255USING THE CAMERA WITH A COMPUTER
2.Connect the USB cable that comes bundled 
with the camera to the USB cradle and the 
USB port of your Macintosh.
•Orient the USB plug so it correctly matches the shape of 
the USB port when you connect them.
•Plug the USB cable into the ports securely, as far as it will 
go. Proper operation is not possible if connections are not 
correct.
3.Open the lens cover to turn on the camera and 
then press [MENU].
•Do not place the camera on the USB cradle yet.
4.On the “Set Up” tab, select “USB” and then 
press [X].
5.Use [S] and [T] to select “Mass Storage” and 
then press [SET].
6.Close the lens cover to turn off the camera 
and then place the camera onto the USB 
cradle.
•Do not place the camera onto the USB cradle while it is 
turned on.
•If you plan to transfer images from the camera’s built-in 
memory to your Macintosh, make sure there is no 
memory card loaded in the camera.[ ] (USB) Connector
Connector AUSB Cable (Bundled)
USB PortConnector Mini-B
Downloaded From camera-usermanual.com Casio Manuals 
						

							256USING THE CAMERA WITH A COMPUTER
7.Press the USB cradle’s 
[USB] button.
Camera-Macintosh Connection
Pressing the cradle’s [USB] button puts it into the USB mode, 
which is indicated by the USB lamp lighting green. In this mode, 
your Macintosh recognizes the memory card loaded in the 
camera (or the camera’s built-in memory if it does not have a 
memory card loaded) as a drive.
The appearance of the drive icon depends on the Mac OS 
version you are using.
From now on, you will not have to perform steps 3 through 5 in 
the above procedure when you connect the camera to your 
Macintosh (unless you change the camera’s USB settings for 
some reason).
IMPORTANT!
•Never disconnect the USB cable or remove the camera 
from the USB cradle without exiting the USB mode first. 
Doing so can corrupt image data. See “Removing the 
Camera from the USB Cradle” on page 259 for the correct 
steps you need to perform to remove the camera from the 
cradle safely.
USB Lamp [USB]
Downloaded From camera-usermanual.com Casio Manuals 
						

							257USING THE CAMERA WITH A COMPUTER
■Connecting the Camera to Your Macintosh 
after the First Time
Since you need to configure menu settings only the first time you 
connect the camera to your Macintosh, later connections are 
much simpler.
1.Close the lens cover to turn off the camera 
and then place the camera onto the USB 
cradle.
2.Press the USB cradle’s 
[USB] button.
•Pressing the cradle’s [USB] 
button puts it into the USB 
mode, which is indicated by 
the USB lamp lighting 
green.
■Viewing Camera Images on Your Macintosh
After connecting the camera to your Macintosh, you can view 
camera images on your Macintosh screen.
1.Double-click the camera’s drive icon.
2.Double-click the “DCIM” folder.
3.Double-click the folder that contains the image 
you want to view.
4.Double-click the file that contains the image 
you want to view.
This displays the image.
IMPORTANT!
•Do not leave the same image displayed on your Macintosh 
screen for a long time. Doing so can cause image “burn in”.
NOTE•An image that was rotated on the camera will be displayed 
on your Macintosh screen in its original (unrotated) 
orientation.
[USB]
Downloaded From camera-usermanual.com Casio Manuals 
						

							258USING THE CAMERA WITH A COMPUTER
■Saving an Image on Your Macintosh
In order to work on an image to put it into an album, you must 
first save it to your Macintosh. To save a camera image to your 
Macintosh, you must first establish a connection between them 
via the camera’s USB cradle.
1.Double-click the camera’s drive icon.
2.Drop the “DCIM” folder into the folder where 
you want to store it.
This copies the “DCIM” folder to the folder on your 
Macintosh.
IMPORTANT!
•Never use your computer to modify, delete, move, or 
rename any image files that are in the camera’s built-in 
memory or memory card. Doing so can cause problems 
with the camera’s image management data, which will 
make it impossible to play back images on the camera and 
can drastically alter remaining memory capacity. Whenever 
you want to modify, delete, move, or rename an image, do 
so only on images that have been copied to your 
Macintosh.
•Never unplug the USB cable, or operate the camera or 
cradle while viewing or storing images. Doing so can cause 
data to become corrupted.
Downloaded From camera-usermanual.com Casio Manuals 
						

							259USING THE CAMERA WITH A COMPUTER
■Removing the Camera from the USB Cradle
1.On your Macintosh screen, drag the camera 
drive to Trash.
2.Press the USB cradle [USB] button. After 
making sure that the cradle’s USB lamp is not 
lit, remove the camera from the cradle.
Transfer of Images from the Camera and 
Management of Images on Your 
Macintosh
If you are running Mac OS X, you can manage snapshots using 
iPhoto, which comes bundled with your operating system.
If you are running Mac OS 9, use commercially available 
software.
Playing Movies
You can use QuickTime, which comes 
bundled with your operating system, to play 
back movies. To play back a movie, first copy 
the movie to your Macintosh and then double-
click the movie file.
Downloaded From camera-usermanual.com Casio Manuals 
						

							260USING THE CAMERA WITH A COMPUTER
■Minimum Computer System Requirements 
for Movie Playback
The minimum system requirements described below are 
necessary to use your Macintosh to play back movies recorded 
with this camera.
IMPORTANT!
•The above is the recommended environment. Configuring 
this environment does not guarantee proper operation.
•Even if your computer meets the minimum requirements 
described above, certain settings and other installed 
software may interfere with proper playback of movies.
•Movie file playback is not supported under OS 9.
Viewing User Documentation (PDF Files)
You must have Adobe Reader or Adobe Acrobat Reader 
installed on your computer in order to view the contents of a 
PDF file. If you don’t, go to the Adobe Systems Incorporated 
website and install Acrobat Reader.
1.On the CD-ROM, open the “Manual” folder.
•Use the CD-ROM that has “User’s Guide included” on its 
label.
2.Open the “Digital Camera” folder and then 
open the folder for the language whose user’s 
guide you want to view.
3.Open the file named “camera_xx.pdf”.
•“xx” is the language code (Example: camera_e.pdf is for 
English.)
Registering as a User
Internet registration only is supported. Visit the following CASIO 
website to register:
http://world.casio.com/qv/register/ OS : OS X 10.3.9 or greater
Required Software : QuickTime 7 or greater
Downloaded From camera-usermanual.com Casio Manuals