Casio Exilim EX V8 User Manual

							221PRINTING
■Printing on a Printer that Supports 
PictBridge or USB DIRECT-PRINT
You can connect the camera directly to a PictBridge or USB 
DIRECT-PRINT compliant printer and print images without going 
through a computer.
•The camera’s USB cradle also allows easy connection to a 
printer. Before connecting to a printer via the USB cradle, be 
sure to perform the following procedure first.
1.Press [MENU].
2.On the “Set Up” tab, select “USB” and then 
press [X].
3.Use [S] and [T] to select the setting that suits 
your printer and then press [SET].
4.Connect the USB cable that comes bundled 
with the camera to the USB cradle and your 
printer’s USB port.
•Also, connect the AC adaptor to the cradle and plug the 
adaptor into an electrical outlet.
•If you do not plan to use the AC adaptor, make sure that 
the camera’s battery is fully charged.
•Nothing appears on the camera’s monitor screen if the 
camera is on the USB cradle while the bundled AV cable 
is connected to the cradle. Be sure to disconnect the AV 
cable from the cradle if you want to use the camera’s 
monitor screen to view images.
For this type of printer:Select this setting:
USB DIRECT-PRINT compatible Mass Storage
PictBridge compatible PTP
USB
USB PortUSB Cable (Bundled)
Connector A
[ ] (USB) Connector
Connector 
Mini-B
Downloaded From camera-usermanual.com Casio Manuals 
						

							222PRINTING
5.Turn off the camera and place it onto the USB 
cradle.
6.Turn on the printer.
7.Load paper into the printer.
8.Press the USB 
cradle’s [USB] button.
This displays a print menu on 
the camera’s monitor screen.
9.Use [S] and [T] to select “Paper Size” and 
then press [X].
10.Use [S] and [T] to select a paper size and 
then press [SET].
•The following are the available paper sizes.
3.5 × 5, 5 × 7, 4 × 6, A4, 8.5 × 11, By Printer
•Selecting “By Printer” prints using a paper size selected 
on the printer.
•Available paper settings depend on the connected 
printer. For full details, see the user documentation that 
comes with your printer.
Downloaded From camera-usermanual.com Casio Manuals 
						

							223PRINTING
11.Use [S] and [T] to specify the print option 
you want.
If you want to print a specific image:
Select “1 Image” and then press [SET]. After that, use [W] 
and [X] to display the image you want to print.
If you want to print multiple images:
Select “DPOF Printing” and then press [SET]. Next, use 
the DPOF settings (page 224) to specify the images you 
want to select.
•To toggle date stamping 
on and off, slide the zoom 
controller. The date stamp 
will be printed when “On” 
is indicated on the monitor 
screen.
12.Use [S] and [T] to select “Print” and then 
press [SET].
Printing will start and the message “Busy... Please wait...” 
will appear on the monitor screen. The message will 
disappear after a short while, even though printing is still 
being performed. Pressing any camera button will cause the 
printing status message to re-appear.
The print menu screen will re-appear when printing is 
complete.
•If you selected “1 Image” in step 11, you can repeat the 
procedure from step 11 to print other images, if you want.
13.After you are finished printing, press the USB 
cradle’s [USB] button.
This will turn off the camera.
Downloaded From camera-usermanual.com Casio Manuals 
						

							224PRINTING
DPOF (Digital Print Order Format) lets you specify 
which images you want to print, the number of 
copies, and whether date stamping is turned on or 
off. The settings you configure are recorded on the 
memory card. After configuring settings you can 
use the memory card to print on a home printer that supports 
DPOF or take the memory card to a professional print service. 
With DPOF, you can configure settings while viewing the actual 
images on the camera’s monitor screen, so there is no need to 
recall hard-to-remember files names, etc.
IMPORTANT!
•Some printers may ignore time stamp settings or may not 
support DPOF at all. Check the user documentation that 
comes with your printer for details.
•Certain print service providers may not support DPOF or 
may support different printing protocols. In this case, you 
will need to perform printing in accordance with the 
instructions provided by the print service you are using.
■Configuring DPOF Settings Individually for 
Each Image
1.In the PLAY mode, press [MENU].
2.On the “PLAY” tab, 
select “DPOF 
Printing” and then 
press [X].
3.Use [S] and [T] to select “Select images” and 
then press [X].
4.Use [W] and [X] to scroll through the images 
until the one you want to print is on the 
monitor screen.
Using DPOF to Specify Images to be 
Printed and the Number of Copies
Downloaded From camera-usermanual.com Casio Manuals 
						

							225PRINTING
5.Use [S] and [T] to specify the number of 
copies.
•You can specify up to 99 for the number of copies. 
Specify 0 if you do not want to print the image.
6.If you want to include the date in the images, 
slide the zoom controller to turn on date 
stamping.
•To turn off date stamping, slide the zoom controller so 
“Off” is displayed.
•Repeat steps 4 through 6 to configure settings for other 
images, if you want.
7.After everything is the way you want, press 
[SET] to save the settings.
■Configuring the Same DPOF Settings for All 
the Images
1.In the PLAY mode, press [MENU].
2.On the “PLAY” tab, select “DPOF Printing” 
and then press [X].
3.Use [S] and [T] to select “All images” and 
then press [X].
4.Use [S] and [T] to specify the number of 
copies.
•You can specify up to 99 for the number of copies. 
Specify 0 if you do not want to print.
5.If you want to include the date in all the 
images, slide the zoom controller to turn on 
date stamping.
•To turn off date stamping, slide the zoom controller so 
“Off” is displayed.
6.After everything is the way you want, press 
[SET] to save the settings.
Downloaded From camera-usermanual.com Casio Manuals 
						

							226PRINTING Clear DPOF settings when you no longer need them!
DPOF settings are not cleared automatically after printing is 
complete. This means that if you perform another printing 
operation without clearing DPOF settings, printing will be 
performed in accordance with the last settings you configured. If 
you no longer need the currently configured DPOF settings, use 
the procedure under “Configuring the Same DPOF Settings for 
All the Images” to change the number of copies setting for all the 
images to 00.
Tell your print service about your DPOF settings!
If you take a memory card to a professional print service, be 
sure to tell them that it includes DPOF settings for the images to 
be printed and the number of copies. If you don’t, the print 
service may print all the images without regard to your DPOF 
settings, or they may ignore your date stamp setting.
Date Stamping
You can use any one of the following three methods to include 
the recording date in the printout of an image.
•Configure DPOF settings on the camera to specify date 
stamping (page 224)
– If an image already has the date or time stamped into it 
using the camera’s Date Stamping feature, turning on 
DPOF date stamping will cause the two dates to be 
stamped in the same location. Be sure to turn off DPOF 
date stamping when printing an image that is stamped with 
the camera’s Date Stamping function.
– Some printers may ignore time stamp settings or may not 
support DPOF at all. Check the user documentation that 
comes with your printer for details.
– Note that some professional print services do not support 
DPOF printing. Check with your service before ordering 
prints.
•The camera’s Date Stamping feature stamps the date and 
time directly into the image data (page 147).
Downloaded From camera-usermanual.com Casio Manuals 
						

							227PRINTING
•You can insert dates using the bundled Photo Loader 
with HOT ALBUM (page 232) software (Windows only).
•Request date stamping when ordering prints from a 
professional print service
– Some print services do not support date printing. Check 
with your service for more information.Your camera supports the protocols described below.
■PictBridge
Camera and Imaging Products Association (CIPA)
■USB DIRECT-PRINT
Seiko Epson Corporation
■PRINT Image Matching III
Using image editing software and printing on a 
printer that also supports PRINT Image Matching 
III makes it possible to use information about 
shooting conditions that is recorded with the 
image, and produce exactly the type of image you 
want.
PRINT Image Matching and PRINT Image Matching III are 
trademarks of Seiko Epson Corporation.
Supported Protocols
Downloaded From camera-usermanual.com Casio Manuals 
						

							228PRINTING
■Exif Print
Printing on a printer that also supports Exif 
Print (Exif 2.2) uses information about 
shooting conditions recorded with the image 
to enhance printed image quality.
Contact your printer manufacturer for information about models 
that support Exif Print, printer upgrades, etc.
Downloaded From camera-usermanual.com Casio Manuals 
						

							229USING THE CAMERA WITH A COMPUTER
USING THE CAMERA WITH A COMPUTER
Connecting the camera to a computer with the bundled USB 
cable provides you with the capabilities described below.*You can also transfer images to a computer for viewing and 
storage without connecting the camera, by removing the 
memory card from the camera and reading the contents of the 
card with your computer (page 261).
The procedures you need to perform when using the camera 
with your computer and when using the bundled software are 
different for Windows and the Macintosh.
•Windows users should refer to “Using the Camera with a 
Windows Computer” on page 230.
•Macintosh users should refer to “Using the Camera with a 
Macintosh” on page 253.
What you can do
View and 
store 
images*You can use your computer to view camera 
images and for long-term storage of images.
Manage, 
edit, and 
print imagesYou can manage, edit, and print images stored 
on your computer.
•Refer to the explanations later in this section 
and install the required software on your 
computers.
Transfer 
images to 
the cameraOn a Windows computer (only), you can 
transfer images from your computer to camera 
memory.
•You can even transfer images that were not 
originally recorded with the camera. You can 
capture (cut) a portion of the image (web 
page, map, etc.) currently on your computer 
screen and transfer it to camera memory.
Downloaded From camera-usermanual.com Casio Manuals 
						

							230USING THE CAMERA WITH A COMPUTER
IMPORTANT!
•This camera supports USB 2.0 Hi-Speed protocol. Though 
it can be used with a computer that supports only USB 1.1 
protocol, higher speed data transfer becomes possible 
when USB 2.0 Hi-Speed is supported. Note that certain 
computer models, connecting through a USB hub, and 
other system conditions can slow down data transfer and 
even cause operational problems.Install the required software in accordance with what version of 
Windows you are running and what you want to do.
Using the Camera with a Windows 
Computer
ObjectiveWindows 
VersionInstall this software:See 
page:
•Viewing 
images on 
a computer
•Storing 
images on 
a computerVista/XP/
2000/Me–
(USB driver not required.)–
98SE/98USB driver Type B
•You can download the 
USB driver from the 
official EXILIM Website at 
http://www.exilim.com/234
Transfer of 
images from 
the camera 
and 
management 
of images on 
the computerVista/XP/
2000Photo Loader with HOT 
ALBUM 3.1
DirectX 9.0c (When DirectX 
9.0 or higher is not installed 
on the computer already.)241
Play movies XP/2000QuickTime 7243
Downloaded From camera-usermanual.com Casio Manuals